Ward 2019 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6578
133
Updated
05 May 2019

This dataset was last updated on Stats NZ Geographic Data Service on 05 May 2019.

This dataset is the major released version of the annually released ward boundaries at 1 January 2019, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and does not fully represent the official full extent boundaries. Wards are defined under the Local Electoral Act 2001 and result from dividing a territorial authority for electoral purposes. Wards are defined at meshblock level.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2019 Ward attachment below.

Layer ID 98740
Data type Vector multipolygon
Feature count 245
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Constituency 2019 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6655
35
Updated
02 May 2019

This dataset was last updated on Stats NZ Geographic Data Service on 02 May 2019.

This dataset is the definitive set of annually released regional council constituency boundaries at 1 January 2019 as defined by the regional councils and/or Local Government Commission, and maintained by Stats NZ. Constituencies are established under the Local Electoral Act 2001 and result from the division of a region for electoral purposes. If a regional council decides to have a Māori constituency, the constituencies within the region are known as general constituencies and Māori constituencies. Constituencies are divisions of regional council areas. They are defined at meshblock level.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2019 Constituency attachment below.

Layer ID 98746
Data type Vector multipolygon
Feature count 62
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Urban Rural 2019 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6451
103
Updated
05 May 2019

This dataset was last updated on Stats NZ Geographic Data Service on 05 May 2019.

This dataset is the definitive set of the annually released urban rural boundaries at 1 January 2019, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. Urban rural is an output geography that classifies New Zealand into areas that share common urban or rural characteristics. Urban areas are built from the Statistical Area 2 geography, while rural and water areas are built from the Statistical Area 1 geography. Urban areas are statistically defined areas with no administrative or legal basis. The urban rural indicator is an attribute of this classification and provides additional information about a location's urban or rural nature.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2019 Urban Rural or ANZLIC Metadata 2019 Urban Rural Indicator attachments below.

Layer ID 98743
Data type Vector multipolygon
Feature count 668
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2019 (Centroid True)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6495
40
Updated
03 May 2019

This dataset was last updated on Stats NZ Geographic Data Service on 03 May 2019.

Statistical Area 2 2019 (Centroid True) is the true centroid point layer for the major released version of the annually released statistical area 2 (SA2) boundaries for 2019.

The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the location of a set of polygons as points, particularly when used for comparative analysis.

Note that the centroid could potentially fall outside the SA2 polygon, depending on the shape of the polygon. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 98770
Data type Vector point
Feature count 2239
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

2018 Census occupied and unoccupied private dwellings by Regional Council

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6435
62
Added
27 Sep 2019

This dataset was first added to Stats NZ Geographic Data Service on 27 Sep 2019.

This dataset contains occupied and unoccupied private dwelling counts from the 2006, 2013, and 2018 Censuses, with percentage changes between the 2013 and 2018 Censuses, by regional council.

These regional council boundaries extend to the 12 mile limit and are as at 1 January 2018, for further information see Regional Council 2018 (generalised).

This data uses fixed random rounding to protect confidentiality, for further information see 2018 confidentiality rules.

Note: the 2018 Census counted fewer dwellings in the Marlborough region than existed at census time. This was mainly in the Marlborough Sounds. If you intend to use dwelling counts at this geography, please contact censusrequests@stats.govt.nz for more information.

For further information see the attachments below: Information about the data (2018 census private dwellings by REGC2018), 2018 census private dwellings by REGC2018 lookup, 2018 census private dwellings by REGC2018.

Layer ID 103904
Data type Vector multipolygon
Feature count 17
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 2019 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6404
69
Updated
03 May 2019

This dataset was last updated on Stats NZ Geographic Data Service on 03 May 2019.

This dataset is the definitive set of annually released statistical area 1 (SA1) boundaries at 1 January 2019, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. SA1 is an output geography that allows the release of more detailed information about population characteristics than is available at the meshblock level. SA1s are defined at meshblock level.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2019 Statistical Area 1 attachment below.

Layer ID 98760
Data type Vector multipolygon
Feature count 29694
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Community Board 2019 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6417
46
Updated
02 May 2019

This dataset was last updated on Stats NZ Geographic Data Service on 02 May 2019.

This dataset is the definitive set of annually released community board/local board boundaries at 1 January 2019, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. Community boards are set up under the Local Government Act 2002 and Local Electoral Act 2001.

Local boards also fall within the community board classification. Local boards were introduced as part of the new local government arrangements for Auckland in 2010.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2019 Community Board attachment below.

Layer ID 98745
Data type Vector multipolygon
Feature count 187
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Constituency 2019 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6278
36
Updated
02 May 2019

This dataset was last updated on Stats NZ Geographic Data Service on 02 May 2019.

This dataset is the definitive set of annually released regional council constituency boundaries at 1 January 2019, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. Constituencies are established under the Local Electoral Act 2001 and result from the division of a region for electoral purposes. If a regional council decides to have a Māori constituency, the constituencies within the region are known as general constituencies and Māori constituencies. Constituencies are divisions of regional council areas. They are defined at meshblock level.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2019 Constituency attachment below.

Layer ID 98747
Data type Vector multipolygon
Feature count 62
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 2019 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6222
80
Updated
03 May 2019

This dataset was last updated on Stats NZ Geographic Data Service on 03 May 2019.

This dataset is the definitive set of statistical area 1 (SA1) boundaries at 1 January 2019 as defined by Stats NZ. SA1 is an output geography that allows for the release of more detailed information about population characteristics than is available at the meshblock level. SA1s are defined at meshblock level.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2019 Statistical Area 1 attachment below or link to the StatsNZ Classification System Aria.

Layer ID 98761
Data type Vector multipolygon
Feature count 29895 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 2019 (Centroid Inside)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6242
22
Updated
03 May 2019

This dataset was last updated on Stats NZ Geographic Data Service on 03 May 2019.

This dataset is the definitive set of statistical area 1 (SA1) inside centroid point layer for the major released version of the annually released statistical area 1 (SA1) boundaries as at 1 January 2019 as defined by Stats NZ.

The "inside" centroid is a point which always falls inside each SA1 polygon as this is often desirable in some users cases. The placement of the point is typically in the widest part of the polygon. The algorithms used are proprietary to ESRI and are related to label placement.

Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the Meshblock geometry. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 98764
Data type Vector point
Feature count 29879
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 151 to 160 of 652