Māori Electoral District 2007

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6938
18
Added
15 Oct 2019

This dataset was first added to Stats NZ Geographic Data Service on 15 Oct 2019.

Māori Electoral District 2007 is the definitive set of 2007 Māori electoral district boundaries as defined by the Representation Commission. Land Information New Zealand (LINZ) and Stats NZ are the custodians. These boundaries comprise the Māori electoral districts as constituted under the Electoral Act 1993. Māori electoral districts extend to the 12-mile limit and are defined at meshblock level. The number of Māori electoral districts, and Māori electoral populations for each electorate, are calculated using formula in the Electoral Act 1993. The Representation Commission is convened by the Surveyor-General every five years following a Census of Population and Dwellings, and Māori Electoral Option. Its role is to re-draw electoral boundaries to make sure each electorate has about the same number of people. When setting the boundaries, the Representation Commission also considers existing boundaries, community of interest (including iwi affiliations), the infrastructure that links communities (such as main roads), topographical features, and any projected variation in the population of those districts during their existence. Māori Electoral District is a flat classification 7 categories These boundaries were used for the 2008 and 2011 New Zealand general elections.

This layer has been generalised, i.e. simplified for rapid drawing and is designed for thematic or web mapping purposes.

Layer ID 104066
Data type Vector multipolygon
Feature count 7
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2020 (Centroid Inside)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6817
40
Updated
30 Jun 2020

This dataset was last updated on Stats NZ Geographic Data Service on 30 Jun 2020.

This dataset contains the inside centroid point layer for the annually released statistical area 2 (SA2) boundaries as at 1 January 2020.The "inside" centroid is a point which always falls inside each SA2 polygon as this is often desirable. The placement of the point is typically in the widest part of the polygon. The algorithms used are proprietary to ESRI and are related to label placement. Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the SA2 geometry. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 104426
Data type Vector point
Feature count 2239
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Geographic Areas File 2020

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5992
710
Updated
12 May 2020

This dataset was last updated on Stats NZ Geographic Data Service on 12 May 2020.

The geographic areas file 2020 is a downloadable csv file that classifies meshblocks into larger geographic areas, such as statistical area 2s, territorial authorities, and regional councils. You can use the area files, which are also known as concordance files, to see how the various geographic boundaries link together.

For each meshblock, there is a series of codes that link to any meshblock-defined geographic area. All areas are set as at 1 January of the specified year. Concordance files are available from different years, to enable data for the same area classification to be compared over time.

The areas files can be used in conjunction with the geographic boundary files available on Stats NZ's Geographic Data Service.

For earlier geographic area files refer to the Geographic area files on the Stats NZ website.

From 2020 onwards, names are provided with and without tohutō/macrons, as applicable. Where a descriptor column has a macron, the corresponding column name without a macron is suffixed with ‘ascii’.

The geographic areas file 2020 was released prior to the setting of the general electorate 2020 (GED2020) and Māori electorate 2020 (MED2020) boundaries and therefore does not contain these. A GED2020 and MED2020 correspondence to meshblock is available here: datafinder.stats.govt.nz/data/category/electorates...

Table ID 104285
Data type Table
Row count 53596
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Māori Electoral District 2014

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6629
53
Added
15 Oct 2019

This dataset was first added to Stats NZ Geographic Data Service on 15 Oct 2019.

Māori Electoral District 2014 is the definitive set of 2014 Māori electoral district boundaries as defined by the Representation Commission. Land Information New Zealand (LINZ) and Stats NZ are the custodians. These boundaries comprise the Māori electoral districts as constituted under the Electoral Act 1993. Māori electoral districts extend to the 12-mile limit and are defined at meshblock level. The number of Māori electoral districts, and Māori electoral populations for each electorate, are calculated using formula in the Electoral Act 1993. The Representation Commission is convened by the Surveyor-General every five years following a Census of Population and Dwellings, and Māori Electoral Option. Its role is to re-draw electoral boundaries to make sure each electorate has about the same number of people. When setting the boundaries, the Representation Commission also considers existing boundaries, community of interest (including iwi affiliations), the infrastructure that links communities (such as main roads), topographical features, and any projected variation in the population of those districts during their existence. Māori Electoral District is a flat classification 7 categories These boundaries were used for the 2014 and 2017 New Zealand general elections.

This layer has been generalised, i.e. simplified for rapid drawing and is designed for thematic or web mapping purposes.

Layer ID 104063
Data type Vector multipolygon
Feature count 7
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

2018 Census Individual (part 3a) total New Zealand by Statistical Area 1

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6334
332
Added
18 May 2020

This dataset was first added to Stats NZ Geographic Data Service on 18 May 2020.

This individual (part 3a) dataset is displayed by statistical area 1 geography and contains information on:

• Work and labour force status

• Status in employment

• Occupation – major group, by usual residence address

• Occupation – major group, by workplace address*

• Industry (division), by usual residence address

• Industry (division), by workplace address*

* Workplace address is coded from information supplied by respondents about their workplaces. Where respondents do not supply sufficient information, their responses are coded to ‘not further defined’. The statistical area 1 dataset for 2018 Census excludes these ‘not further defined’ areas.

This dataset contains counts at statistical area 1 for selected variables from the 2018, 2013, and 2006 censuses. The geography corresponds to 2018 boundaries.

The data uses fixed random rounding to protect confidentiality. Some counts of less than 6 are suppressed according to 2018 confidentiality rules. Values of ‘-999’ indicate suppressed data.

For further information on this dataset please refer to the Statistical area 1 dataset for 2018 Census webpage - footnotes for individual part 3a, Excel workbooks, and CSV files are available to download. Data quality ratings for 2018 Census variables, summarising the quality rating and priority levels for 2018 Census variables, are available.

For information on the statistical area 1 geography please refer to the Statistical standard for geographic areas 2018.

Layer ID 104621
Data type Vector multipolygon
Feature count 29889 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Urban Accessibility 2018 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6507
90
Added
27 Sep 2020

This dataset was first added to Stats NZ Geographic Data Service on 27 Sep 2020.

The urban accessibility (UA) classification measures the degree of urban influence New Zealand’s urban areas have on surrounding rural areas. It classifies the geographic accessibility of rural statistical area 1s (SA1s) and small urban areas according to their proximity, or degree of remoteness, to larger urban areas. This classification provides increased understanding of the heterogeneity of rural areas and small urban areas and will allow more extensive analysis and reporting. Understanding the degree of urban accessibility or remoteness is important as it has a major influence on the employment sector, accessibility to services, and population composition and change.
The methodology uses drive time from an SA1 address weighted centroid to the outside boundary of the nearest major, large, and medium urban area (from Stats NZ urban rural (UR) classification) to classify rural SA1s and small urban areas to one of five categories of accessibility or remoteness. The Open Source Routing Machine service using the OpenStreetMap road network is used to calculate the drive times.

A concordance between SA1 and Urban Accessibility can be found on Aria.

Rural SA1s and small urban areas are classified to the following categories:

·High urban accessibility:
0 to15 minutes from major urban areas

·Medium urban accessibility:
15 to 25 minutes from major urban areas
0 to 25 minutes from large urban areas
0 to 15 minutes from medium urban areas

·Low urban accessibility:
25 to 60 minutes from major or large urban areas
15 to 60 minutes from medium urban areas

·Remote:
60 to 120 minutes from major, large or medium urban areas

·Very remote:
more than 120 minutes from major, large or medium urban areas

For more information refer to: Urban accessibility - methodology and classification.

The full classification is shown below:
111 Major urban area

112 Large urban area

113 Medium urban area

221 High urban accessibility

222 Medium urban accessibility

223 Low urban accessibility

224 Remote

225 Very remote

331 Inland water

332 Inlet

333 Oceanic

Note: Areas of 221 High urban accessibility and 222 Medium urban accessibility may be regarded as peri-urban in nature and combined with urban areas for analytical purposes.

Layer ID 105022
Data type Vector multipolygon
Feature count 11
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Subdivision 2020 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6532
38
Updated
02 Feb 2020

This dataset was last updated on Stats NZ Geographic Data Service on 02 Feb 2020.

This dataset is the definitive set of annually released (territorial authority) subdivision boundaries for 2020, as defined by the territorial authorities and/or Local Government Commission and maintained by Stats NZ (the custodian). This version contains 145 categories.

Subdivisions are set up under the Local Government Act 2002 and Local Electoral Act 2001. A subdivision is a division of a community or local board area for electoral purposes. Subdivisions are defined at meshblock level, and do not coincide with the statistical area 1 (SA1) geography or the statistical area 2 (SA2) geography. A number of territorial authorities do not have subdivisions, and if they do, the subdivisions do not necessarily cover the whole territorial authority area. Subdivisions nest within community or local boards. Where a community or local board is divided into subdivisions all of the community or local board area must be included in a subdivision.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104259
Data type Vector multipolygon
Feature count 145
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

New Zealand business demography statistics at February 2020 (on statistical area 2 2020)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6334
233
Added
29 Mar 2021

This dataset was first added to Stats NZ Geographic Data Service on 29 Mar 2021.

Business demography statistics

Business demography statistics provide an annual snapshot (as at February) of the structure and characteristics of New Zealand businesses. Statistics produced include counts of enterprises and geographic units by industry, geography such as region or statistical area 2 (SA2), institutional sector, business type, degree of overseas ownership, enterprise births, enterprise deaths, survival rate of enterprises and employment levels.

The series covers economically significant private-sector and public-sector enterprises that are engaged in the production of goods and services in New Zealand. These enterprises are maintained on the Statistics NZ Business Register (BR), which generally includes all employing units and those enterprises with GST turnover greater than $30,000 per year.

For further information: www.stats.govt.nz/information-releases/new-zealand...

Statistical geography

This dataset provides data for the SA2 geography (SA22020_V1_00). Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’. Data for earlier years is available in NZ.Stat– see Geographic units by industry and statistical area 2000-2020.

Geographic units

The geographic unit represents a business location engaged in one, or predominantly one, kind of economic activity at a single physical site or base (e.g. a factory, a farm, a shop, an office). Geographic units are unique to enterprises and an enterprise unit can have one or many geographic units (business locations). Typically, an enterprise unit only has a single geographic unit, unless the enterprise has paid employees who permanently work at more than one location. Geographic units can be transferred between enterprises (e.g. enterprise B purchases a factory (a geographic unit on the BR) as a going concern from enterprise A).

Employee count data

Employee counts (ECs) are sourced from the Inland Revenue employer monthly schedule (EMS) tax form.

Industry

The Australian and New Zealand Standard Industrial Classification (ANZSIC) 2006 is used to compile Business Demography statistics. The classification can be viewed and downloaded from Ariā.

ANZSIC 2006 divisions are:

A Agriculture, Forestry and Fishing

B Mining

C Manufacturing

D Electricity, Gas, Water and Waste Services

E Construction

F Wholesale Trade

G Retail Trade

H Accommodation and Food Services

I Transport, Postal and Warehousing

J Information Media and Telecommunications

K Financial and Insurance Services

L Rental, Hiring and Real Estate Services

M Professional, Scientific and Technical Services

N Administrative and Support Services

O Public Administration and Safety

P Education and Training

Q Health Care and Social Assistance

R Arts and Recreation Services

S Other Services

Total Industry

Rounding

Enterprise, geographic unit, and EC counts are randomly rounded. Due to rounding, individual figures may not sum to the published totals.

Quality limitations of fine-level data, including SA2-level data

We recommend caution when using fine-level regional and industry business demography data. The Business Register (BR) supports quality national-level and aggregate industry-level statistics but is not designed to provide quality fine-level regional or industry statistics. The BR update sources can have timing lags and less robust information for small and medium-sized enterprises. These quality weaknesses can be highlighted in fine-level business demography statistics.

For more information about data quality and available data go to DataInfo+.

Layer ID 105388
Data type Vector multipolygon
Feature count 2239
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 2020 (Centroid True)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6382
41
Added
19 Jan 2020

This dataset was first added to Stats NZ Geographic Data Service on 19 Jan 2020.

This dataset contains the true centroid point layer for the annually released statistical area 1 (SA1) boundaries as at 1 January 2020.The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the location of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the SA1 polygon, depending on the shape of the polygon.The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 104427
Data type Vector point
Feature count 29879
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

2018 Census Dwelling total New Zealand by Statistical Area 1

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5919
481
Updated
16 Jun 2020

This dataset was last updated on Stats NZ Geographic Data Service on 16 Jun 2020.

This dwelling dataset is displayed by statistical area 1 geography and contains information on:

  • Occupied private dwelling type
  • Dwelling record type, for occupied dwellings
  • Occupied non-private dwelling type
  • Number of rooms
  • Number of bedrooms
  • Main types of heating used to heat dwellings (total responses)
  • Fuel types used to heat dwelling (total responses)
  • Dwelling occupancy status
  • Access to basic amenities
  • Dwelling dampness indicator
  • Dwelling mould indicator

This dataset contains counts at statistical area 1 for selected variables from the 2018, 2013, and 2006 censuses. The geography corresponds to 2018 boundaries.

The data uses fixed random rounding to protect confidentiality. Some counts of less than 6 are suppressed according to 2018 confidentiality rules. Values of ‘-999’ indicate suppressed data.

For further information on this dataset please refer to the Statistical area 1 dataset for 2018 Census webpage - footnotes for dwelling, Excel workbooks, and CSV files are available to download. Data quality ratings for 2018 Census variables, summarising the quality rating and priority levels for 2018 Census variables, are available.

For information on the statistical area 1 geography please refer to the Statistical standard for geographic areas 2018.

The ‘Total unoccupied private dwelling category, which had been overly suppressed for the ‘Dwelling occupancy status’ variable has been corrected in Rev. 7.

Layer ID 104628
Data type Vector multipolygon
Feature count 29889 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 171 to 180 of 696