Territorial Authority 2010

Stats NZ / GIS
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

199
15
Added
04 Apr 2019

This dataset was first added to Stats NZ Geographic Data Service on 04 Apr 2019.

This dataset is a definitive set of territorial authority boundaries for 2010 as defined by the Local Government Commission and/or the territorial authorities themselves but maintained by Statistics New Zealand (the custodian). A territorial authority is defined under the Local Government Act 2002 as a city or a district council.

Layer ID 99745
Data type Vector multipolygon
Feature count 74
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Territorial Authority 1995 (Generalised)

Stats NZ / GIS
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

129
5
Added
27 Mar 2019

This dataset was first added to Stats NZ Geographic Data Service on 27 Mar 2019.

Territorial Authority 1995 is based on Meshblock 1996 as there is no digital pattern available for Meshblock 1995. Meshblocks are the lowest level building block geography and are aggregated to form higher geographies such as territorial authority, wards, statistical area 1 etc.. From the meshblock pattern,Territorial Authority 1995 was dissolved using the dissolve tool in the Arc GIS suite.

Layer ID 99723
Data type Vector multipolygon
Feature count 74
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

General Electoral District 2002

Stats NZ / GIS
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

224
11
Added
18 Mar 2019

This dataset was first added to Stats NZ Geographic Data Service on 18 Mar 2019.

General Electoral District 2002 is the definitive set of 2002 general electoral district boundaries as defined by the Electoral Commission as at 18 April 2002. Land Information New Zealand (LINZ) and Statistics New Zealand are the custodians.These districts comprise the general electoral districts as constituted under the Electoral Act 1993. General electoral districts extend to the 12 mile limit and are defined at meshblock level.The number of general electoral districts, and electoral populations for each electorate, is controlled by the criteria in the Electoral Act 1993. Within these criteria, when setting the boundaries, the Representation Commission considers community of interest, facilities of communication, topographical features, and any projected variation in the general electoral population of those districts during their existence. The Representation Commission is convened by the Surveyor-General every five years, following a population census and Māori Electoral Option. Its role is to re-draw electoral boundaries to follow prescribed population quotas.General Electoral District is a flat classification with 62 categories.

Layer ID 99645
Data type Vector multipolygon
Feature count 62
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

General Electoral District 2002 Clipped

Stats NZ / GIS
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

94
3
Added
18 Mar 2019

This dataset was first added to Stats NZ Geographic Data Service on 18 Mar 2019.

General Electoral District 2002 is the definitive set of 2002 general electoral district boundaries as defined by the Electoral Commission as at 18 April 2002. General electoral districts extend to the 12 mile limit, this version is clipped to the coastline. Land Information New Zealand (LINZ) and Statistics New Zealand are the custodians.These districts comprise the general electoral districts as constituted under the Electoral Act 1993.General electorate boundaries are defined at meshblock level.The number of general electoral districts, and electoral populations for each electorate, is controlled by the criteria in the Electoral Act 1993. Within these criteria, when setting the boundaries, the Representation Commission considers community of interest, facilities of communication, topographical features, and any projected variation in the general electoral population of those districts during their existence. The Representation Commission is convened by the Surveyor-General every five years, following a population census and Māori Electoral Option. Its role is to re-draw electoral boundaries to follow prescribed population quotas.General Electoral District is a flat classification with 62 categories.

Layer ID 99643
Data type Vector multipolygon
Feature count 62
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

ANZLIC Metadata 2013 Wards

Stats NZ / GIS
Licence

Creative Commons Attribution 3.0

You may use this work for commercial purposes.

You must attribute the creator in your own works.

27
0
Added
10 Dec 2018

This item was first added to Stats NZ Geographic Data Service on 10 Dec 2018

8

ANZLIC Metadata 2013 Wards

Document ID21847
File nameanzlic-metadata-2013-wards.pdf
TypePDF
Size660 KB

Meshblock 2019 (generalised)

Stats NZ / GIS
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2018
131
Added
06 Dec 2018

This dataset was first added to Stats NZ Geographic Data Service on 06 Dec 2018.

This dataset is the definitive set of annually released meshblock boundaries at 1 January 2019. Stats NZ maintains an annual meshblock geography for collecting and producing statistical data. This allows data to be compared over time. A meshblock is the smallest geographic unit for which statistical data is collected and processed by Stats NZ. A meshblock is defined by a geographic area, which can vary in size from part of a city block to a large area of rural land. Each meshblock borders on another to form a network covering all of New Zealand, including coasts and inlets and extending out to the 200-mile economic zone. Meshblocks are added together to build up larger geographic areas such as statistical area 1 (SA1), statistical area 2 (SA2), and urban rural. They are also used to define electoral districts, territorial authorities, and regional councils. The digital geographic boundaries are defined and maintained by Stats NZ. Meshblocks cover the land area of New Zealand, the water area to the 12-mile limit, the Chatham Islands, Kermadec Islands, sub-Antarctic islands, off-shore oil rigs, and Ross Dependency.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

There are 16 meshblocks not held in digitised form.

For further information see ANZLIC Metadata 2019 Meshblock attachment below.

Layer ID 98972
Data type Vector multipolygon
Feature count 53596 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock Higher Geographies 2019 (generalised)

Stats NZ / GIS
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1254
44
Added
05 Dec 2018

This dataset was first added to Stats NZ Geographic Data Service on 05 Dec 2018.

This dataset is the major released version of the annually released meshblock boundaries concorded to higher geographies at 1 January 2019. This version contains 53,596 meshblocks, including 16 with empty or null geometries (non-digitised meshblocks).

This Meshblock Higher Geographies 2019 (generalised) file is a correspondence, or concordance, which relates meshblocks to larger geographic areas or 'higher geographies'. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

The higher geographies contained in this concordance are: community board (CB2019), constituency (CON2019), Māori constituency (MCON2019), regional council (REGC2019), statistical area 1 (SA12019), statistical area 2 (SA22019), subdivision (TASUB2019), territorial authority (TA2019), urban rural (UR2019), urban rural indicator (IUR2019), and ward (WARD2019).

The following geographies were first introduced in 2018: statistical area 1 (SA1), statistical area 2 (SA2), urban rural (UR), and urban rural indicator (IUR). These new geographies are part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaces the 1992 New Zealand Standard Areas Classification (NZSAC92). The statistical standard for geographic areas is to be used from 2018 (SSGA18). It defines the Stats NZ input and output geographic classifications and describes their primary purposes, and sets out requirements and guidelines for the creation and maintenance of statistical geographies. For further information on individual higher geographies, refer to their metadata.

For further information on individual higher geographies, refer to their metadata.

Layer ID 98971
Data type Vector multipolygon
Feature count 53596 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

ANZLIC Metadata 2019 Statistical Area 2

Stats NZ / GIS
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

63
11
Added
05 Dec 2018

This item was first added to Stats NZ Geographic Data Service on 05 Dec 2018

11

ANZLIC Metadata 2019 Statistical Area 2

Document ID21843
File nameanzlic-metadata-2019-statistical-area-2.pdf
TypePDF
Size409 KB

Statistical Area 2 2019 (generalised)

Stats NZ / GIS
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1689
100
Updated
03 May 2019

This dataset was last updated on Stats NZ Geographic Data Service on 03 May 2019.

This dataset is the definitive set of statistical area 2 (SA2) boundaries at 1 January 2019 as defined by Stats NZ. SA2 is a new output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. SA2s are defined at SA1 and meshblock levels.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2019 Statistical Area 2 attachment below or link to the StatsNZ Classification System Aria.

Layer ID 98970
Data type Vector multipolygon
Feature count 2255 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

ANZLIC Metadata 2018 Urban Rural Indicator

Stats NZ / GIS
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

27
2
Added
04 Dec 2018

This item was first added to Stats NZ Geographic Data Service on 04 Dec 2018

8

ANZLIC Metadata 2018 Urban Rural Indicator

Document ID21841
File nameanzlic-metadata-2018-urban-rural-indicator.pdf
TypePDF
Size391 KB
Results 1 to 10 of 255