Urban Accessibility 2018 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

530
32
Added
27 Sep 2020

This dataset was first added to Stats NZ Geographic Data Service on 27 Sep 2020.

The urban accessibility (UA) classification measures the degree of urban influence New Zealand’s urban areas have on surrounding rural areas. It classifies the geographic accessibility of rural statistical area 1s (SA1s) and small urban areas according to their proximity, or degree of remoteness, to larger urban areas. This classification provides increased understanding of the heterogeneity of rural areas and small urban areas and will allow more extensive analysis and reporting. Understanding the degree of urban accessibility or remoteness is important as it has a major influence on the employment sector, accessibility to services, and population composition and change.
The methodology uses drive time from an SA1 address weighted centroid to the outside boundary of the nearest major, large, and medium urban area (from Stats NZ urban rural (UR) classification) to classify rural SA1s and small urban areas to one of five categories of accessibility or remoteness. The Open Source Routing Machine service using the OpenStreetMap road network is used to calculate the drive times.

A concordance between SA1 and Urban Accessibility can be found on Aria.

Rural SA1s and small urban areas are classified to the following categories:

·High urban accessibility:
0 to15 minutes from major urban areas

·Medium urban accessibility:
15 to 25 minutes from major urban areas
0 to 25 minutes from large urban areas
0 to 15 minutes from medium urban areas

·Low urban accessibility:
25 to 60 minutes from major or large urban areas
15 to 60 minutes from medium urban areas

·Remote:
60 to 120 minutes from major, large or medium urban areas

·Very remote:
more than 120 minutes from major, large or medium urban areas

For more information refer to: Urban accessibility - methodology and classification.

The full classification is shown below:
111 Major urban area

112 Large urban area

113 Medium urban area

221 High urban accessibility

222 Medium urban accessibility

223 Low urban accessibility

224 Remote

225 Very remote

331 Inland water

332 Inlet

333 Oceanic

Layer ID 105022
Data type Vector multipolygon
Feature count 11
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Geographic Areas File 2018

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

0
0
Added
24 May 2020

This dataset was first added to Stats NZ Geographic Data Service on 24 May 2020.

The geographic areas file 2018 is a downloadable csv file that classifies meshblocks into larger geographic areas, such as statistical area 2s, territorial authorities, and regional councils. You can use this areas file, also known as a concordance file, to see how the various geographic boundaries link together.

For each meshblock, there is a series of codes that link to any meshblock-defined geographic area. All areas are set as at 1 January of the specified year. Concordance files are available from different years, to enable data for the same area classification to be compared over time.

The areas files can be used in conjunction with the geographic boundary files available on Stats NZ's Geographic Data Service.

Table ID 104680
Data type Table
Row count 53589
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 2018 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7114
198
Added
03 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.

This dataset is the definitive set of annually released statistical area 1 (SA1) boundaries at 1 January 2018, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. SA1 is a new output geography that allows the release of more detailed information about population characteristics than is available at the meshblock level. SA1s are defined at meshblock level.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Statistical Area 1 attachment below.

Layer ID 92211
Data type Vector multipolygon
Feature count 29688
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 2018 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

9287
467
Added
03 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.

This dataset is the definitive set of statistical area 1 (SA1) boundaries at 1 January 2018 as defined by Stats NZ. SA1 is a new output geography that allows for the release of more detailed information about population characteristics than is available at the meshblock level. SA1s are defined at meshblock level.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Statistical Area 1 attachment below or link to the StatsNZ Classification System Aria.

Layer ID 92210
Data type Vector multipolygon
Feature count 29889 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Regional Council 2018 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7708
333
Added
03 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.

This dataset is the major released version of the annually released regional council boundaries at 1 January 2018, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. Regional council is the top tier of local government in New Zealand. Regional councils are defined at meshblock, statistical area 1 (SA1), and statistical area 2 (SA2) levels.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Regional Council attachment below.

Layer ID 92205
Data type Vector multipolygon
Feature count 17
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Regional Council 2018 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5507
821
Added
03 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.

This dataset is the definitive set of the annually released regional council boundaries at 1 January 2018 as defined by the regional council and/or Local Government Commission and maintained by Stats NZ. Regional council is the top tier of local government in New Zealand. Regional councils are defined at meshblock, statistical area 1 (SA1), and statistical area 2 (SA2) levels.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Regional Council attachment below.

Layer ID 92204
Data type Vector multipolygon
Feature count 17
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Māori Constituency 2018 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6817
45
Added
03 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.

This dataset is the definitive set of the annually released regional council Māori constituency boundaries at 1 January 2018 as defined by the regional councils and/or Local Government Commission, and maintained by Stats NZ. Māori constituencies are established under the Local Electoral Act 2001 and result from the division of a region for electoral purposes. Māori constituencies are divisions of regional council areas.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Māori Constituency attachment below.

Layer ID 92202
Data type Vector multipolygon
Feature count 20
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Māori Constituency 2018 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3838
34
Added
03 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.

This dataset is the definitive set of the annually released regional council Māori constituency boundaries at 1 January 2018, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. Māori constituencies are established under the Local Electoral Act 2001 and result from the division of a region for electoral purposes. Māori constituencies are divisions of regional council areas.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Māori Constituency attachment below.

Layer ID 92203
Data type Vector multipolygon
Feature count 20
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 Higher Geographies 2018 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7428
111
Updated
22 May 2018

This dataset was last updated on Stats NZ Geographic Data Service on 22 May 2018.

This dataset is the definitive version of the annually released statistical area 1 (SA1) boundaries concorded to higher geographies at 1 January 2018. This statistical area 1 higher geographies 2018 file is a correspondence, or concordance, which relates SA1s to larger geographic areas or 'higher geographies'. The higher geographies contained in this concordance are: regional council (REGC2018), statistical area 2 (SA22018), territorial authority (TA2018), urban rural (UR2018), and urban rural indicator (IUR2018).The following geographies were introduced in 2018: statistical area 1 (SA12018), statistical area 2 (SA22018), urban rural (UR2018), and urban rural indicator (IUR2018). These new geographies are part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaces the 1992 New Zealand Standard Areas Classification (NZSAC92). The statistical standard for geographic areas is to be used from 2018 (SSGA18). It defines the Stats NZ input and output geographic classifications and describes their primary purposes, and sets out requirements and guidelines for the creation and maintenance of statistical geographies. Statistical area geographies are aggregations of meshblocks optimised to be of similar population sizes to enable the release of low-level data. They are non-administrative areas that are in between meshblocks and territorial authorities in size. Statistical areas either define or aggregate to define urban rural areas, territorial authorities, and regional councils.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

Layer ID 92206
Data type Vector multipolygon
Feature count 29889 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock Higher Geographies 2018 (high definition)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5505
108
Updated
04 Nov 2018

This dataset was last updated on Stats NZ Geographic Data Service on 04 Nov 2018.

This dataset is a high definition (HD) version of the annually released meshblock boundaries concorded to higher geographies as at 1 January 2018 as defined by Stats NZ. This version contains 53,589 meshblocks. This Meshblock Higher Geographies 2018 file is a correspondence, or concordance, which relates meshblocks to larger geographic areas or 'higher geographies'. This HD version is the most detailed geometry, suitable for use in GIS for geometric analysis operations and for the computation of areas, centroids and other metrics. The HD version is aligned to the LINZ cadastre. The higher geographies contained in this concordance are: community board (CB2018), constituency (CON2018), Māori constituency (MCON2018), regional council (REGC2018), statistical area 1 (SA12018), statistical area 2 (SA22018), subdivision (TASUB2018), territorial authority (TA2018), urban rural (UR2018), urban rural indicator (IUR2018), and ward (WARD2018). The following geographies were first introduced in 2018: statistical area 1 (SA12018), statistical area 2 (SA22018), urban rural (UR2018), and urban rural indicator (IUR2018). These new geographies are part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaces the 1992 New Zealand Standard Areas Classification (NZSAC92). The statistical standard for geographic areas is to be used from 2018 (SSGA18). It defines the Stats NZ input and output geographic classifications and describes their primary purposes, and sets out requirements and guidelines for the creation and maintenance of statistical geographies.

Digital boundary data became freely available on 1 July 2007.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in November 2018. All SA2 codes are unchanged.

For further information on individual higher geographies, refer to their metadata.

Layer ID 92201
Data type Vector multipolygon
Feature count 53589 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 37