Wards 2013 (generalised version)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6027
49
Added
30 Nov 2016

This dataset was first added to Stats NZ Geographic Data Service on 30 Nov 2016.

Wards were originally set up within any territorial authority with a population of 20,000. Wards are defined under the local Electoral Act 2001 and result from the division, of the district of a territorial authority for electoral purposes. Ward boundaries are reviewed in the year immediately preceding the triennial local government elections. Wards are numbered based on their corresponding territorial authority. Each ward has a unique five digit number. The first three digits represent the territorial authority that the ward lies within. The following two digits are sequential, and represent the number of wards within a territorial authority.

Layer ID 27506
Data type Vector multipolygon
Feature count 258
ElevationZ coordinates
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 2018 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5844
177
Added
03 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.

This dataset is the definitive set of annually released statistical area 1 (SA1) boundaries at 1 January 2018, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. SA1 is a new output geography that allows the release of more detailed information about population characteristics than is available at the meshblock level. SA1s are defined at meshblock level.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Statistical Area 1 attachment below.

Layer ID 92211
Data type Vector multipolygon
Feature count 29688
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Subdivision 2016 (generalised version)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5903
21
Added
07 Dec 2015

This dataset was first added to Stats NZ Geographic Data Service on 07 Dec 2015.

Subdivision 2016 Generalised Version is the definitive set of territorial authority subdivision boundaries for 2016 as defined by the territorial authorities and Local Government Commission but maintained by Statistics New Zealand (the custodian).

Layer ID 8408
Data type Vector multipolygon
Feature count 119
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Urban Rural 2018 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5649
284
Added
03 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.

This dataset is the definitive set of urban rural boundaries at 1 January 2018 as defined by Stats NZ. Urban rural is a new output geography that classifies New Zealand into areas that share common urban or rural characteristics. Urban areas are built from the Statistical Area 2 geography, while rural and water areas are built from the Statistical Area 1 geography. Urban areas are statistically defined areas with no administrative or legal basis. The urban rural indicator is an attribute of this classification and provides additional information about a location's urban or rural nature.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Urban Rural or ANZLIC Metadata 2018 Urban Rural Indicator attachments below.

Layer ID 92218
Data type Vector multipolygon
Feature count 722 (incl. 4 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Subdivision 2018 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5824
50
Added
03 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.

This dataset is the definitive set of the annually released territorial authority subdivision boundaries at 1 January 2018 as defined by the territorial authorities and/or Local Government Commission, and maintained by Stats NZ. Subdivisions are set up under the Local Government Act 2002 and Local Electoral Act 2001. A subdivision is a division of a community or local board area for electoral purposes. Subdivisions are defined at meshblock and nest within community or local boards.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Subdivision attachment below.

Layer ID 92216
Data type Vector multipolygon
Feature count 139
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Regional Council 2001

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5842
17
Added
20 Oct 2016

This dataset was first added to Stats NZ Geographic Data Service on 20 Oct 2016.

This is the definitive set of regional council boundaries for 2001 as defined by the Local Government Commission and/or regional councils themselves but maintained by Statistics New Zealand (the custodian) as at 1 January 2001.
The regional council is the top tier of local government in New Zealand. There are 16 regional councils in New Zealand (defined by Part 1 of Schedule 2 of the Local Government Act 2002). Eleven are governed by an elected regional council, while five are governed by territorial authorities (the second tier of local government) who also perform the functions of a regional council and are known as unitary authorities. These unitary authorities are Nelson City Council, and Gisborne, Tasman, and Marlborough District Councils. The Chatham Islands Council also performs some of the functions of a regional council, but is not strictly a unitary authority. Unitary authorities act as regional councils for the purposes of a wide range of legislative purposes. Regional councils are responsible for the administration of many environmental and transport matters such as land transport planning and harbour navigation and safety.
Regional Councils were established in 1989 after the abolition of the 22 local government regions. The Local Government Act 2002 requires the boundaries of regions to conform, as far as possible, to one or more water catchments. When determining regional boundaries, the Local Government Commission gave consideration to regional communities of interest when selecting which water catchments to include in a region. It also considered factors such as natural resource management, land use planning and environmental matters. Some regional council boundaries are coterminous with territorial authority boundaries but there are several exceptions. An example is Taupo District, which is geographically split between four regions, although most of its area falls within the Waikato Region. Where territorial local authorities straddle regional council boundaries, the affected area is statistically defined by complete area units. In general, however, regional councils contain complete territorial authorities.
The seaward boundary of any coastal regional council is the twelve mile New Zealand territorial limit.

Layer ID 25740
Data type Vector multipolygon
Feature count 17
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 2018 (Centroid Inside)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5739
50
Added
11 Jan 2018

This dataset was first added to Stats NZ Geographic Data Service on 11 Jan 2018.

SA12018_V1_00_Centroid_Inside is the inside centroid point layer for the major released version of the annually released statistical area 1 (SA1) boundaries as at 1 January 2018 as defined by Stats NZ.The "inside" centroid is a point which always falls inside each SA1 polygon as this is often desirable in some users cases. The placement of the point is typically in the widest part of the polygon. The algorithms used are proprietary to ESRI and are related to label placement. Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the Meshblock geometry. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 93613
Data type Vector point
Feature count 29873
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Māori Constituency 2018 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5620
42
Added
03 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.

This dataset is the definitive set of the annually released regional council Māori constituency boundaries at 1 January 2018 as defined by the regional councils and/or Local Government Commission, and maintained by Stats NZ. Māori constituencies are established under the Local Electoral Act 2001 and result from the division of a region for electoral purposes. Māori constituencies are divisions of regional council areas.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Māori Constituency attachment below.

Layer ID 92202
Data type Vector multipolygon
Feature count 20
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Territorial Authority 2001

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5608
23
Added
20 Oct 2016

This dataset was first added to Stats NZ Geographic Data Service on 20 Oct 2016.

This dataset is the definitive set of territorial authority boundaries for 2001 as defined by the Local Government Commission and/or the territorial authorities themselves but maintained by Statistics New Zealand (the custodian). A territorial authority is defined under the Local Government Act 2002 as a city or a district council.

Layer ID 25737
Data type Vector multipolygon
Feature count 74
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Subdivision 2018 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5579
45
Added
03 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.

This dataset is the definitive set of the annually released territorial authority subdivision boundaries at 1 January 2018, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. Subdivisions are set up under the Local Government Act 2002 and Local Electoral Act 2001. A subdivision is a division of a community or local board area for electoral purposes. Subdivisions are defined at meshblock level and nest within community or local boards.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Subdivision attachment below.

Layer ID 92217
Data type Vector multipolygon
Feature count 139
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 51 to 60 of 188