Tagged: Downloadable Data in Oceania - Page 8

This dataset contains the annually released statistical area 1 (SA1) boundaries for 2021, as defined by Stats NZ, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 29,695 SA1 categories.

SA1s were introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaced the New Zealand Standard Areas Classification (NZSAC92). SA1 is a new output geography that allows the release of more detailed information about population characteristics than is available at the meshblock level.

Built by joining meshblocks, SA1s have an ideal size range of 100–200 residents, and a maximum population of about 500. This is to minimise suppression of population data in multivariate statistics tables. SA1s either define or aggregate to define SA2s, urban rural areas, territorial authorities, and regional councils. Some SA1s that contain apartment blocks, retirement villages, and large non-residential facilities have more than 500 residents.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

The SA1 classification can also be downloaded from the Stats NZ classification and concordance tool Ariā.

This dataset is the definitive set of annually released statistical area 1 (SA1) boundaries for 2021 as defined by Stats NZ. This version contains 29,910 SA1 categories.

SA1s were introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaced the New Zealand Standard Areas Classification (NZSAC92). SA1 is a new output geography that allows the release of more detailed information about population characteristics than is available at the meshblock level.

Built by joining meshblocks, SA1s have an ideal size range of 100–200 residents, and a maximum population of about 500. This is to minimise suppression of population data in multivariate statistics tables. SA1s either define or aggregate to define SA2s, urban rural areas, territorial authorities, and regional councils. Some SA1s that contain apartment blocks, retirement villages, and large non-residential facilities have more than 500 residents.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

The SA1 classification can also be downloaded from the Stats NZ classification and concordance tool Ariā.

This dataset contains the true centroid point layer for the annually released statistical area 1 (SA1) boundaries as at 1 January 2021. The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the location of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the SA1 polygon, depending on the shape of the polygon.The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

This dataset contains the inside centroid point layer for the annually released statistical area 1 (SA1) boundaries as at 1 January 2021. The "inside" centroid is a point which always falls inside each SA1 polygon as this is often desirable. The placement of the point is typically in the widest part of the polygon. The algorithms used are proprietary to ESRI and are related to label placement. Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the SA1 geometry. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

This dataset contains the annually released statistical area 1 (SA1) boundaries for 2020, as defined by Stats NZ, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 29,694 SA1 categories.

SA1s were introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaced the New Zealand Standard Areas Classification (NZSAC92). SA1 is a new output geography that allows the release of more detailed information about population characteristics than is available at the meshblock level.

Built by joining meshblocks, SA1s have an ideal size range of 100–200 residents, and a maximum population of about 500. This is to minimise suppression of population data in multivariate statistics tables. SA1s either define or aggregate to define SA2s, urban rural areas, territorial authorities, and regional councils. Some SA1s that contain apartment blocks, retirement villages, and large non-residential facilities have more than 500 residents.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

The SA1 classification can also be downloaded from the Stats NZ classification and concordance tool Ariā.

This dataset is the definitive set of annually released statistical area 1 (SA1) boundaries for 2020 as defined by Stats NZ. This version contains 29,895 SA1 categories.

SA1s were introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaced the New Zealand Standard Areas Classification (NZSAC92). SA1 is a new output geography that allows the release of more detailed information about population characteristics than is available at the meshblock level.

Built by joining meshblocks, SA1s have an ideal size range of 100–200 residents, and a maximum population of about 500. This is to minimise suppression of population data in multivariate statistics tables. SA1s either define or aggregate to define SA2s, urban rural areas, territorial authorities, and regional councils. Some SA1s that contain apartment blocks, retirement villages, and large non-residential facilities have more than 500 residents.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

The SA1 classification can also be downloaded from the Stats NZ classification and concordance tool Ariā.

RC_IUA 2018 contains urban accessibility classes by regional council geography. The dataset uses geographic boundaries (urban accessibility indicator (IUA), regional council (RC) as at 1 January 2018.

To download census and other data for this classification go to '2018 Census selected variables by Regional Council Urban Accessibility Indicator 2018'.

The urban accessibility (IUA) indicator measures the degree of urban influence New Zealand’s urban areas have on surrounding rural areas. It classifies the geographic accessibility of rural statistical area 1s (SA1s) and small urban areas according to their proximity, or degree of remoteness, to larger urban areas. The full classification is: 111 Major urban area 112 Large urban area 113 Medium urban area 221 High urban accessibility 222 Medium urban accessibility 223 Low urban accessibility 224 Remote 225 Very remote 331 Inland water 332 Inlet 333 Oceanic.

Regional council (RC) boundaries for 2018 are defined by the regional councils and/or Local Government Commission and maintained by Stats NZ. This version contains 16 regional councils. The full classification is: 01 Northland Region 02 Auckland Region 03 Waikato Region 04 Bay of Plenty Region 05 Gisborne Region 06Hawke's Bay Region 07 Taranaki Region 08 Manawatu-Wanganui Region 09 Wellington Region 12 West Coast Region 13 Canterbury Region 14 Otago Region 15 Southland Region 16 Tasman Region 17 Nelson Region 18 Marlborough Region 99 Area Outside Region.

The RC_IUA codes and names combine the RC and IUA codes and names, e.g. 01112 Northland Region_Major urban area.There are 140 classes. Some regional council areas do not contain all IUA classes but each region has at least four IUA classes.

This dataset is the definitive version of the annually released regional council boundaries as at 1 January 2023 as defined by regional councils and/or Local Government Commission, and maintained by Stats NZ (the custodian), clipped to the coastline. This clipped version has been created for cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 16 regional councils and area outside region (Chatham Islands Territory).

​

The regional council is the top tier of local government in New Zealand. Regional councils are defined under schedule 2, part 1 of the Local Government Act 2002. They were established in November 1989 after the abolition of the 22 local government regions. Regional council boundaries must coincide with meshblock boundaries under schedule 3, clause 17 of the Local Government Act 2002.

​

Regional council boundaries are based largely on water catchments, such as rivers, lakes, and harbours. The seaward boundary of the regions is the 12 mile (19.3km) New Zealand territorial limit. In determining regions, consideration was also given to regional communities of interest, natural resource management, land use planning, and environmental matters.

​

There are 16 regions which cover every territorial authority in New Zealand, with the exception of the Chatham Islands Territory (included in 99 Area Outside Region). Five regions are administered as unitary authorities, which function as both regional council and territorial authority. These unitary authorities are Auckland Council, Nelson City Council, and Gisborne, Tasman, and Marlborough District Councils. The Chatham Islands Council also performs some of the functions of a regional council but is not strictly a unitary authority. Unitary authorities act as regional councils for legislative purposes. Regional councils are responsible for administrating many environmental and transport matters, such as land transport planning and harbour navigation and safety.

​

Some regional council boundaries are coterminous with territorial authority boundaries, but there are several exceptions. An example is Taupo District, which is geographically split between four regions, although most of its area falls within the Waikato Region. Where territorial authorities straddle regional council boundaries, the affected area is statistically defined by complete regional councils. In general, however, regional councils contain complete territorial authorities.

​

Auckland Council unitary authority was formed in 2010, under the Local Government (Tamaki Makarau Reorganisation) Act 2009, replacing the Auckland Regional Council and seven territorial authorities.

​

Regional councils are defined at meshblock level. Statistical area 1 and statistical area 2 geographies nest within regional council boundaries.

​

Numbering

The standard classification of regional council is a flat classification and contains 17 categories (including ‘99 Area Outside Region’).

​

Clipped version

This clipped version has been created for cartographic purposes and so does not fully represent the official full extent boundaries.

​

Macrons

Names are provided with and without tohutō/macrons. The column name for those without macrons is suffixed ‘ascii’.

​

Digital data

Digital boundary data became freely available on 1 July 2007.

​

To download geographic classifications in table formats such as CSV please use Ariā

This dataset is the definitive version of the annually released regional council boundaries as at 1 January 2023 as defined by regional councils and/or Local Government Commission, and maintained by Stats NZ (the custodian). This version contains 16 regional councils and area outside region (Chatham Islands Territory).

​

This dataset is the definitive version of the annually released regional council boundaries as at 1 January 2023 as defined by regional councils and/or Local Government Commission, and maintained by Stats NZ (the custodian). This version contains 16 regional councils and area outside region (Chatham Islands Territory). The annual boundaries are used for the full calendar year from 1 January. The annual update may have no changes from the previous release.

​

The regional council is the top tier of local government in New Zealand. Regional councils are defined under schedule 2, part 1 of the Local Government Act 2002. They were established in November 1989 after the abolition of the 22 local government regions. Regional council boundaries must coincide with meshblock boundaries under schedule 3, clause 17 of the Local Government Act 2002.

​

Regional council boundaries are based largely on water catchments, such as rivers, lakes, and harbours. The seaward boundary of the regions is the 12 mile (19.3km) New Zealand territorial limit. In determining regions, consideration was also given to regional communities of interest, natural resource management, land use planning, and environmental matters.

​

There are 16 regions which cover every territorial authority in New Zealand, with the exception of the Chatham Islands Territory (included in 99 Area Outside Region). Five regions are administered as unitary authorities, which function as both regional council and territorial authority. These unitary authorities are Auckland Council, Nelson City Council, and Gisborne, Tasman, and Marlborough District Councils. The Chatham Islands Council also performs some of the functions of a regional council but is not strictly a unitary authority. Unitary authorities act as regional councils for legislative purposes. Regional councils are responsible for administrating many environmental and transport matters, such as land transport planning and harbour navigation and safety.

​

Some regional council boundaries are coterminous with territorial authority boundaries, but there are several exceptions. An example is Taupo District, which is geographically split between four regions, although most of its area falls within the Waikato Region. Where territorial authorities straddle regional council boundaries, the affected area is statistically defined by complete regional councils. In general, however, regional councils contain complete territorial authorities.

​

Auckland Council unitary authority was formed in 2010, under the Local Government (Tamaki Makarau Reorganisation) Act 2009, replacing the Auckland Regional Council and seven territorial authorities.

​

Regional councils are defined at meshblock level. Statistical area 1 and statistical area 2 geographies nest within regional council boundaries.

​

Numbering

The standard classification of regional council is a flat classification and contains 17 categories (including ‘99 Area Outside Region’).

​

Generalised version

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

​

Macrons

Names are provided with and without tohutō/macrons. The column name for those without macrons is suffixed ‘ascii’.

​

Digital data

Digital boundary data became freely available on 1 July 2007.

​

To download geographic classifications in table formats such as CSV please use Ariā

This dataset is the definitive set of the annually released regional council boundaries for 2022 as defined by the regional councils and/or Local Government Commission and maintained by Stats NZ (the custodian), clipped to coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries.

The regional council is the top tier of local government in New Zealand. There are 16 regional councils in New Zealand (defined by Part 1 of Schedule 2 of the Local Government Act 2002). Eleven are governed by an elected regional council, while five are governed by territorial authorities (the second tier of local government), who also perform the functions of a regional council and are known as unitary authorities.

These unitary authorities are Auckland Council, Nelson City Council, and Gisborne, Tasman, and Marlborough District Councils. The Chatham Islands Council also performs some of the functions of a regional council but is not strictly a unitary authority. Unitary authorities act as regional councils for legislative purposes.

The seaward boundary of any coastal regional council is the twelve-mile New Zealand territorial limit. Regional councils are defined at meshblock level. Statistical area 1 and statistical area 2 geographies nest within regional council boundaries.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.