Statistical Area 2 2021 (Centroid True)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1435
15
Updated
13 Jan 2021

This dataset was last updated on Stats NZ Geographic Data Service on 13 Jan 2021.

This dataset contains the true centroid point layer for the annually released statistical area 2 (SA2) boundaries as at 1 January 2021. The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the location of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the SA2 polygon, depending on the shape of the polygon. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 105164
Data type Vector point
Feature count 2243
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2021 (Centroid Inside)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1878
21
Updated
13 Jan 2021

This dataset was last updated on Stats NZ Geographic Data Service on 13 Jan 2021.

This dataset contains the inside centroid point layer for the annually released statistical area 2 (SA2) boundaries as at 1 January 2021. The "inside" centroid is a point which always falls inside each SA2 polygon as this is often desirable. The placement of the point is typically in the widest part of the polygon.

The algorithms used are proprietary to ESRI and are related to label placement. Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the SA2 geometry.

The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 105168
Data type Vector point
Feature count 2243
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

2018 Census occupied and unoccupied private dwellings by Statistical Area 2

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2366
169
Added
27 Sep 2019

This dataset was first added to Stats NZ Geographic Data Service on 27 Sep 2019.

This dataset contains occupied and unoccupied private dwelling counts from the 2006, 2013, and 2018 Censuses, with percentage changes between the 2013 Census and 2018 Censuses, by statistical area 2.

These statistical area 2 boundaries extend to the 12 mile limit and are as at 1 January 2018, for further information see Statistical Area 2 2018 (generalised).

This data uses fixed random rounding to protect confidentiality. Some counts of less than 6 are suppressed according to 2018 confidentiality rules.

Note: The 2018 Census counted fewer dwellings in Marlborough Sounds East, Marlborough Sounds West, and Marlborough Sounds Coastal Marine than existed at census time. If you intend to use dwelling counts at this geography, please contact censusrequests@stats.govt.nz for more information.

For further information see the attachments below: Information about the data (2018 census private dwellings by SA22018), 2018 census private dwellings by SA22018 lookup, 2018 Census private dwellings by SA22018.

Layer ID 103905
Data type Vector multipolygon
Feature count 2253 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

2018 Census occupied and unoccupied private dwellings by Regional Council

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6194
57
Added
27 Sep 2019

This dataset was first added to Stats NZ Geographic Data Service on 27 Sep 2019.

This dataset contains occupied and unoccupied private dwelling counts from the 2006, 2013, and 2018 Censuses, with percentage changes between the 2013 and 2018 Censuses, by regional council.

These regional council boundaries extend to the 12 mile limit and are as at 1 January 2018, for further information see Regional Council 2018 (generalised).

This data uses fixed random rounding to protect confidentiality, for further information see 2018 confidentiality rules.

Note: the 2018 Census counted fewer dwellings in the Marlborough region than existed at census time. This was mainly in the Marlborough Sounds. If you intend to use dwelling counts at this geography, please contact censusrequests@stats.govt.nz for more information.

For further information see the attachments below: Information about the data (2018 census private dwellings by REGC2018), 2018 census private dwellings by REGC2018 lookup, 2018 census private dwellings by REGC2018.

Layer ID 103904
Data type Vector multipolygon
Feature count 17
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

2018 Census occupied and unoccupied private dwellings by Territorial Authority and Auckland Local Board Areas

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5174
76
Added
27 Sep 2019

This dataset was first added to Stats NZ Geographic Data Service on 27 Sep 2019.

This dataset contains occupied and unoccupied private dwelling counts from the 2006, 2013, and 2018 Censuses, with percentage changes between the 2013 2018 Censuses, by territorial authority and Auckland local board areas.

These territorial authority and Auckland local board area boundaries extend to the 12 mile limit and are as at 1 January 2018, for further information see Territorial Authority Local Board 2018 (generalised).

This data uses fixed random rounding to protect confidentiality, for further information see 2018 confidentiality rules.

Note: the 2018 Census counted fewer dwellings in the Marlborough district than existed at census time. This was mainly in the Marlborough Sounds. If you intend to use dwelling counts at this geography, please contact censusrequests@stats.govt.nz for more information.

For further information see the attachments below: Information about the data (2018 census private dwellings by TALB2018), 2018 census private dwellings by TALB2018 lookup, 2018 Census private dwellings by TALB2018.

Layer ID 103906
Data type Vector multipolygon
Feature count 88
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

2018 Census Main means of travel to education by Statistical Area 2

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3449
584
Added
14 Jun 2020

This dataset was first added to Stats NZ Geographic Data Service on 14 Jun 2020.

The 2018 Census commuter view dataset contains the census usually resident population count who are studying (part time or full time), by statistical area 2 for the main means of travel to education variable from the 2018 Census. The geography corresponds to 2018 boundaries.

This dataset is the base data for the ‘There and back again: our daily commute’ competition.

This 2018 Census commuter view dataset is displayed by statistical area 2 geography and contains from-to (journey) on an individual’s usual residence and educational institution address* by main means of travel to education.

*Educational institution address is coded from information supplied by respondents about where they study. Where respondents do not supply sufficient information, their responses are coded to ‘not further defined’. The 2018 Census commuter view datasets excludes these ‘not further defined’ areas, as such the sum of the counts for each region in this dataset may not be equal to the total census usually resident population count who are studying (part time or full time) for that region.

It is recommended that this dataset be downloaded as either a CSV or a file geodatabase.

This dataset can be used in conjunction with the following spatial files by joining on the statistical area 2 code values:

· Statistical Area 2 2018 (generalised)

· Statistical Area 2 2018 (Centroid Inside)

The data uses fixed random rounding to protect confidentiality. Counts of less than 6 are suppressed according to 2018 confidentiality rules. Values of -999 indicate suppressed data..

Data quality ratings for 2018 Census variables, summarising the quality rating and priority levels for 2018 Census variables, are available.

For information on the statistical area 2 geography please refer to the Statistical standard for geographic areas 2018.

Table ID 104721
Data type Table
Row count 22430
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 2021 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3280
147
Added
09 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 09 Dec 2020.

This dataset is the definitive set of annually released meshblock boundaries for 2021 as defined by Stats NZ. This version contains 53,598 meshblocks, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries.

Stats NZ maintains an annual meshblock geography for collecting and producing statistical data. This allows data to be compared over time. A meshblock is the smallest geographic unit for which statistical data is collected and processed by Stats NZ. A meshblock is defined by a geographic area, which can vary in size from part of a city block to a large area of rural land. Each meshblock borders on another to form a network covering all of New Zealand, including coasts and inlets and extending out to the 200-mile economic zone. Meshblocks are added together to build up larger geographic areas such as statistical area 1 (SA1), statistical area 2 (SA2), and urban rural. They are also used to define electoral districts, territorial authorities, and regional councils.

The following 16 meshblocks are outside the 12 mile limit and are not held in digitised form: 0016901, 0016902, 1588000, 3166401, 3166402, 3166600, 3166710, 3166711, 3195000, 3196001, 3196002, 3196003, 3196004, 3196005, 3196006, 3196007.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

The meshblock classification can also be downloaded from the Stats NZ classification and concordance tool Ariā.

Layer ID 105184
Data type Vector multipolygon
Feature count 52930
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 2021 (Centroid Inside)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1557
24
Added
07 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 07 Dec 2020.

This dataset contains the inside centroid point layer for the annually released meshblock boundaries as at 1 January 2021. The "inside" centroid is a point which always falls inside each meshblock polygon as this is often desirable. The placement of the point is typically in the widest part of the polygon.

The algorithms used are proprietary to ESRI and are related to label placement. Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the meshblock polygon.

The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection. Non-digitised meshblocks cannot have a centroid.

Layer ID 105169
Data type Vector point
Feature count 53582
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 2021 (Centroid True)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2268
21
Added
07 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 07 Dec 2020.

This dataset contains the true centroid point layer for the annually released meshblock boundaries as at 1 January 2021. The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid.

The centroid is a useful way of summarizing the locations of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the meshblock polygon, depending on the shape of the polygon.

The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.Non-digitised meshblocks cannot have a centroid.

Layer ID 105167
Data type Vector point
Feature count 53582
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 2021 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1544
49
Added
07 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 07 Dec 2020.

This dataset contains the annually released statistical area 1 (SA1) boundaries for 2021, as defined by Stats NZ, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 29,695 SA1 categories.

SA1s were introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaced the New Zealand Standard Areas Classification (NZSAC92). SA1 is a new output geography that allows the release of more detailed information about population characteristics than is available at the meshblock level.

Built by joining meshblocks, SA1s have an ideal size range of 100–200 residents, and a maximum population of about 500. This is to minimise suppression of population data in multivariate statistics tables. SA1s either define or aggregate to define SA2s, urban rural areas, territorial authorities, and regional councils. Some SA1s that contain apartment blocks, retirement villages, and large non-residential facilities have more than 500 residents.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

The SA1 classification can also be downloaded from the Stats NZ classification and concordance tool Ariā.

Layer ID 105163
Data type Vector multipolygon
Feature count 29695
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 91 to 100 of 384