Urban Accessibility 2018 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

91
21
Added
27 Sep 2020

This dataset was first added to Stats NZ Geographic Data Service on 27 Sep 2020.

The urban accessibility (UA) classification measures the degree of urban influence New Zealand’s urban areas have on surrounding rural areas. It classifies the geographic accessibility of rural statistical area 1s (SA1s) and small urban areas according to their proximity, or degree of remoteness, to larger urban areas. This classification provides increased understanding of the heterogeneity of rural areas and small urban areas and will allow more extensive analysis and reporting. Understanding the degree of urban accessibility or remoteness is important as it has a major influence on the employment sector, accessibility to services, and population composition and change.
The methodology uses drive time from an SA1 address weighted centroid to the outside boundary of the nearest major, large, and medium urban area (from Stats NZ urban rural (UR) classification) to classify rural SA1s and small urban areas to one of five categories of accessibility or remoteness. The Open Source Routing Machine service using the OpenStreetMap road network is used to calculate the drive times.

A concordance between SA1 and Urban Accessibility can be found on Aria.

Rural SA1s and small urban areas are classified to the following categories:

·High urban accessibility:
0 to15 minutes from major urban areas

·Medium urban accessibility:
15 to 25 minutes from major urban areas
0 to 25 minutes from large urban areas
0 to 15 minutes from medium urban areas

·Low urban accessibility:
25 to 60 minutes from major or large urban areas
15 to 60 minutes from medium urban areas

·Remote:
60 to 120 minutes from major, large or medium urban areas

·Very remote:
more than 120 minutes from major, large or medium urban areas

For more information refer to: Urban accessibility - methodology and classification.

The full classification is shown below:
111 Major urban area

112 Large urban area

113 Medium urban area

221 High urban accessibility

222 Medium urban accessibility

223 Low urban accessibility

224 Remote

225 Very remote

331 Inland water

332 Inlet

333 Oceanic

Layer ID 105022
Data type Vector multipolygon
Feature count 11
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Estimated Resident Population at 30 June 2018 by Urban Rural

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

0
0
Added
21 Sep 2020

This dataset was first added to Stats NZ Geographic Data Service on 21 Sep 2020.

This dataset contains information on:

· Estimated resident population (ERP) at 30 June 1996, 2001, 2006, 2013, and 2018 for total population

· ERP at 30 June 2018 by ethnic groups (European or Other (including New Zealander), Māori, Pacific, Asian, and Middle Eastern/Latin American/African) – estimates and percentage

· Sex ratio – number of males per 100 females

· ERP at 30 June 2018 by broad age groups and median age

· Geographies available are regional council areas, territorial authority and Auckland local board areas, Statistical Area 2, and urban rural.

Note: The geography corresponds to 2020 boundaries

Note: -999 indicates data are not available.

About the estimated resident population

The estimated resident population at 30 June in the census year is based on the census usually resident population count, with updates for:

· net census undercount (as measured by a post-enumeration survey)

· residents temporarily overseas on census night

· births, deaths and net migration between census night and 30 June

· reconciliation with demographic estimates at the youngest ages.

The estimated resident population is not directly comparable with the census usually resident population count because of these adjustments.

For more detailed information about the methods used to calculate each base population, see DataInfo+ Demographic estimates.

Ethnic groups

It is important to note that these ethnic groups are not mutually exclusive because people can and do identify with more than one ethnicity. People who identify with more than one ethnicity have been included in each ethnic group.

The 'Māori', 'Pacific', 'Asian' and 'Middle Eastern/Latin American/African' ethnic groups are defined in level 1 of the Ethnicity New Zealand Standard Classification 2005. The estimates for the 'European or Other (including New Zealander)' group include people who belong to the 'European' or 'Other ethnicity' groups defined in level 1 of the standard classification. If a person belongs to both the 'European' and 'Other ethnicity' groups they have only been counted once. Almost all people in the 'Other ethnicity' group belong to the 'New Zealander' sub-group.

Time series

This time series is irregular. Because the 2011 Census was cancelled after the Canterbury earthquake on 22 February 2011, the gap between the 2006-base and 2013-base estimated resident population is seven years. The change in data between 2006 and 2013 may be greater than in the usual five-year gap between censuses. Be careful when comparing trends.

Rounding

Individual figures may not sum to stated totals due to rounding.

More information

See Estimated resident population (2018-base): At 30 June 2018 for commentary about the 2018 ERP.

Subnational population estimates concepts – DataInfo+ provides definitions of terms used in the map.

Access more population estimates data in NZ.Stat:

Theme: Population estimates.

Layer ID 105010
Data type Vector multipolygon
Feature count 668
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Estimated Resident Population at 30 June 2018 by Territorial Authority and Auckland Local Boards

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

0
0
Added
21 Sep 2020

This dataset was first added to Stats NZ Geographic Data Service on 21 Sep 2020.

This dataset contains information on:

· Estimated resident population (ERP) at 30 June 1996, 2001, 2006, 2013, and 2018 for total population

· ERP at 30 June 2018 by ethnic groups (European or Other (including New Zealander), Māori, Pacific, Asian, and Middle Eastern/Latin American/African) – estimates and percentage

· Sex ratio – number of males per 100 females

· ERP at 30 June 2018 by broad age groups and median age

· Geographies available are regional council areas, territorial authority and Auckland local board areas, Statistical Area 2, and urban rural.

Note: The geography corresponds to 2020 boundaries

Note: -999 indicates data are not available.

About the estimated resident population

The estimated resident population at 30 June in the census year is based on the census usually resident population count, with updates for:

· net census undercount (as measured by a post-enumeration survey)

· residents temporarily overseas on census night

· births, deaths and net migration between census night and 30 June

· reconciliation with demographic estimates at the youngest ages.

The estimated resident population is not directly comparable with the census usually resident population count because of these adjustments.

For more detailed information about the methods used to calculate each base population, see DataInfo+ Demographic estimates.

Ethnic groups

It is important to note that these ethnic groups are not mutually exclusive because people can and do identify with more than one ethnicity. People who identify with more than one ethnicity have been included in each ethnic group.

The 'Māori', 'Pacific', 'Asian' and 'Middle Eastern/Latin American/African' ethnic groups are defined in level 1 of the Ethnicity New Zealand Standard Classification 2005. The estimates for the 'European or Other (including New Zealander)' group include people who belong to the 'European' or 'Other ethnicity' groups defined in level 1 of the standard classification. If a person belongs to both the 'European' and 'Other ethnicity' groups they have only been counted once. Almost all people in the 'Other ethnicity' group belong to the 'New Zealander' sub-group.

Time series

This time series is irregular. Because the 2011 Census was cancelled after the Canterbury earthquake on 22 February 2011, the gap between the 2006-base and 2013-base estimated resident population is seven years. The change in data between 2006 and 2013 may be greater than in the usual five-year gap between censuses. Be careful when comparing trends.

Rounding

Individual figures may not sum to stated totals due to rounding.

More information

See Estimated resident population (2018-base): At 30 June 2018 for commentary about the 2018 ERP.

Subnational population estimates concepts – DataInfo+ provides definitions of terms used in the map.

Access more population estimates data in NZ.Stat:

Theme: Population estimates.

Layer ID 105009
Data type Vector multipolygon
Feature count 88
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Estimated Resident Population at 30 June 2018 by Statistical Area 2

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

0
0
Added
21 Sep 2020

This dataset was first added to Stats NZ Geographic Data Service on 21 Sep 2020.

This dataset contains information on:

· Estimated resident population (ERP) at 30 June 1996, 2001, 2006, 2013, and 2018 for total population

· ERP at 30 June 2018 by ethnic groups (European or Other (including New Zealander), Māori, Pacific, Asian, and Middle Eastern/Latin American/African) – estimates and percentage

· Sex ratio – number of males per 100 females

· ERP at 30 June 2018 by broad age groups and median age

· Geographies available are regional council areas, territorial authority and Auckland local board areas, Statistical Area 2, and urban rural.

Note: The geography corresponds to 2020 boundaries

Note: -999 indicates data are not available.

About the estimated resident population

The estimated resident population at 30 June in the census year is based on the census usually resident population count, with updates for:

· net census undercount (as measured by a post-enumeration survey)

· residents temporarily overseas on census night

· births, deaths and net migration between census night and 30 June

· reconciliation with demographic estimates at the youngest ages.

The estimated resident population is not directly comparable with the census usually resident population count because of these adjustments.

For more detailed information about the methods used to calculate each base population, see DataInfo+ Demographic estimates.

Ethnic groups

It is important to note that these ethnic groups are not mutually exclusive because people can and do identify with more than one ethnicity. People who identify with more than one ethnicity have been included in each ethnic group.

The 'Māori', 'Pacific', 'Asian' and 'Middle Eastern/Latin American/African' ethnic groups are defined in level 1 of the Ethnicity New Zealand Standard Classification 2005. The estimates for the 'European or Other (including New Zealander)' group include people who belong to the 'European' or 'Other ethnicity' groups defined in level 1 of the standard classification. If a person belongs to both the 'European' and 'Other ethnicity' groups they have only been counted once. Almost all people in the 'Other ethnicity' group belong to the 'New Zealander' sub-group.

Time series

This time series is irregular. Because the 2011 Census was cancelled after the Canterbury earthquake on 22 February 2011, the gap between the 2006-base and 2013-base estimated resident population is seven years. The change in data between 2006 and 2013 may be greater than in the usual five-year gap between censuses. Be careful when comparing trends.

Rounding

Individual figures may not sum to stated totals due to rounding.

More information

See Estimated resident population (2018-base): At 30 June 2018 for commentary about the 2018 ERP.

Subnational population estimates concepts – DataInfo+ provides definitions of terms used in the map.

Access more population estimates data in NZ.Stat:

Theme: Population estimates.

Layer ID 105008
Data type Vector multipolygon
Feature count 2173
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Estimated Resident Population at 30 June 2018 by Regional Council

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

0
0
Added
21 Sep 2020

This dataset was first added to Stats NZ Geographic Data Service on 21 Sep 2020.

This dataset contains information on:

· Estimated resident population (ERP) at 30 June 1996, 2001, 2006, 2013, and 2018 for total population

· ERP at 30 June 2018 by ethnic groups (European or Other (including New Zealander), Māori, Pacific, Asian, and Middle Eastern/Latin American/African) – estimates and percentage

· Sex ratio – number of males per 100 females

· ERP at 30 June 2018 by broad age groups and median age

· Geographies available are regional council areas, territorial authority and Auckland local board areas, Statistical Area 2, and urban rural.

Note: The geography corresponds to 2020 boundaries

Note: -999 indicates data are not available.

About the estimated resident population

The estimated resident population at 30 June in the census year is based on the census usually resident population count, with updates for:

· net census undercount (as measured by a post-enumeration survey)

· residents temporarily overseas on census night

· births, deaths and net migration between census night and 30 June

· reconciliation with demographic estimates at the youngest ages.

The estimated resident population is not directly comparable with the census usually resident population count because of these adjustments.

For more detailed information about the methods used to calculate each base population, see DataInfo+ Demographic estimates.

Ethnic groups

It is important to note that these ethnic groups are not mutually exclusive because people can and do identify with more than one ethnicity. People who identify with more than one ethnicity have been included in each ethnic group.

The 'Māori', 'Pacific', 'Asian' and 'Middle Eastern/Latin American/African' ethnic groups are defined in level 1 of the Ethnicity New Zealand Standard Classification 2005. The estimates for the 'European or Other (including New Zealander)' group include people who belong to the 'European' or 'Other ethnicity' groups defined in level 1 of the standard classification. If a person belongs to both the 'European' and 'Other ethnicity' groups they have only been counted once. Almost all people in the 'Other ethnicity' group belong to the 'New Zealander' sub-group.

Time series

This time series is irregular. Because the 2011 Census was cancelled after the Canterbury earthquake on 22 February 2011, the gap between the 2006-base and 2013-base estimated resident population is seven years. The change in data between 2006 and 2013 may be greater than in the usual five-year gap between censuses. Be careful when comparing trends.

Rounding

Individual figures may not sum to stated totals due to rounding.

More information

See Estimated resident population (2018-base): At 30 June 2018 for commentary about the 2018 ERP.

Subnational population estimates concepts – DataInfo+ provides definitions of terms used in the map.

Access more population estimates data in NZ.Stat:

Theme: Population estimates.

Layer ID 105007
Data type Vector multipolygon
Feature count 17
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock with Regional Tourism Organisation Areas 2020

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

0
0
Added
07 Sep 2020

This dataset was first added to Stats NZ Geographic Data Service on 07 Sep 2020.

Regional tourism organisation boundaries are meshblock based and are created by dissolving groupings of ward and territorial authority areas. This version of regional tourism organisation boundaries is displayed at meshblock level and extends to the 12 mile limit. It is concorded to ward 2020, and territorial authority 2020. Regional tourism organisations are responsible for the promotion of their regions to prospective domestic and international visitors.

Note: Not all 37 categories representing regional tourism organisation areas are currently operating as regional tourism organisations at the time of publishing. Those areas not operating as regional tourism organisations are: Kawerau (06), Rangitikei (14), Tararua (16), Horowhenua (18) and Waimate (28).

Fiordland includes Fiordland National Park, Manapouri, Te Anau, and Te Anau Downs areas with the rest of the area assigned to Southland. Where a regional tourism organisation area boundary crossed a meshblock the meshblock was assigned to whichever regional tourism organisation area the majority of the meshblock fell within. The meshblocks crossed by regional tourism organisation areas boundaries are: 3174500 Fiordland 3175100 Fiordland 3173403 Southland 3172802 Southland 3172804 Southland 3172100 Fiordland 4004893 Fiordland 3191600 Fiordland 3191701 Fiordland 3192300 Southland 3192400 Southland 3193400 Fiordland 3172802 Southland 3172804 Southland 3172100 Fiordland 4004893 Fiordland 3191600 Fiordland 3191701 Fiordland 3192300 Southland 3192400 Southland 3193400 Fiordland.

Names for territorial authority and ward are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

Layer ID 104942
Data type Vector multipolygon
Feature count 53596 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Regional Tourism Organisation Areas 2020

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

0
0
Added
31 Aug 2020

This dataset was first added to Stats NZ Geographic Data Service on 31 Aug 2020.

Regional tourism organisation boundaries are meshblock based and were created by dissolving groupings of ward and territorial authority areas. This version or regional tourism organisation boundaries extends to the 12 mile limit. Regional tourism organisations are responsible for the promotion of their regions to prospective domestic and international visitors. This version has been developed with input from Regional Tourism New Zealand.

Note: Not all 37 categories representing regional tourism organisation areas are currently operating as regional tourism organisations at the time of publishing. Those areas not operating as regional tourism organisations are: Kawerau (06), Rangitikei (14), Tararua (16), Horowhenua (18) and Waimate (28).

Fiordland includes Fiordland National Park, Manapouri, Te Anau, and Te Anau Downs areas with the rest of the area assigned to Southland. Where a regional tourism organisation area boundary crossed a meshblock the meshblock was assigned to whichever regional tourism organisation area the majority of the meshblock fell within. The meshblocks crossed by regional tourism organisation areas boundaries are: 3174500 Fiordland 3175100 Fiordland 3173403 Southland 3172802 Southland 3172804 Southland 3172100 Fiordland 4004893 Fiordland 3191600 Fiordland 3191701 Fiordland 3192300 Southland 3192400 Southland 3193400 Fiordland.

The classification relating to this version can be viewed and downloaded from the Stats NZ classifications management system Ariā: Regional Tourism Organisation Areas V3.0.0.

Layer ID 104935
Data type Vector multipolygon
Feature count 37
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Regional Tourism Organisation Areas 2020 Clipped

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

501
7
Added
31 Aug 2020

This dataset was first added to Stats NZ Geographic Data Service on 31 Aug 2020.

Regional tourism organisation boundaries are meshblock based and were created by dissolving groupings of ward and territorial authority areas. This version of regional tourism organisation boundaries is clipped to the coastline and excludes those meshblocks that had a land/water attribute of Inlet or Oceanic. Regional tourism organisations are responsible for the promotion of their regions to prospective domestic and international visitors. This version has been developed with input from Regional Tourism New Zealand.

Note: Not all 37 categories representing regional tourism organisation areas are currently operating as regional tourism organisations at the time of publishing. Those areas not operating as regional tourism organisations are: Kawerau (06), Rangitikei (14), Tararua (16), Horowhenua (18) and Waimate (28).

Fiordland includes Fiordland National Park, Manapouri, Te Anau, and Te Anau Downs areas with the rest of the area assigned to Southland. Where a regional tourism organisation area boundary crossed a meshblock the meshblock was assigned to whichever regional tourism organisation area the majority of the meshblock fell within. The meshblocks crossed by regional tourism organisation areas boundaries are: 3174500 Fiordland 3175100 Fiordland 3173403 Southland 3172802 Southland 3172804 Southland 3172100 Fiordland 4004893 Fiordland 3191600 Fiordland 3191701 Fiordland 3192300 Southland 3192400 Southland 3193400 Fiordland.

The classification relating to this version can be viewed and downloaded from the Stats NZ classifications management system Ariā: Regional Tourism Organisation Areas V3.0.0.

Layer ID 104934
Data type Vector multipolygon
Feature count 37
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

2018 Census Main means of travel to education by Statistical Area 2

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

644
441
Added
14 Jun 2020

This dataset was first added to Stats NZ Geographic Data Service on 14 Jun 2020.

The 2018 Census commuter view dataset contains the census usually resident population count who are studying (part time or full time), by statistical area 2 for the main means of travel to education variable from the 2018 Census. The geography corresponds to 2018 boundaries.

This dataset is the base data for the ‘There and back again: our daily commute’ competition.

This 2018 Census commuter view dataset is displayed by statistical area 2 geography and contains from-to (journey) on an individual’s usual residence and educational institution address* by main means of travel to education.

* Educational institution address is coded from information supplied by respondents about where they study. Where respondents do not supply sufficient information, their responses are coded to ‘not further defined’. The 2018 Census commuter view datasets excludes these ‘not further defined’ areas, as such the sum of the counts for each region in this dataset may not be equal to the total employed census usually resident population count aged 15 years and over for that region.

It is recommended that this dataset be downloaded as either a CSV or a file geodatabase.

This dataset can be used in conjunction with the following spatial files by joining on the statistical area 2 code values:

· Statistical Area 2 2018 (generalised)

· Statistical Area 2 2018 (Centroid Inside)

The data uses fixed random rounding to protect confidentiality. Counts of less than 6 are suppressed according to 2018 confidentiality rules. Values of -999 indicate suppressed data..

Data quality ratings for 2018 Census variables, summarising the quality rating and priority levels for 2018 Census variables, are available.

For information on the statistical area 2 geography please refer to the Statistical standard for geographic areas 2018.

Table ID 104721
Data type Table
Row count 22430
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

2018 Census Main means of travel to work by Statistical Area 2

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

885
548
Added
14 Jun 2020

This dataset was first added to Stats NZ Geographic Data Service on 14 Jun 2020.

The 2018 Census commuter view dataset contains the employed census usually resident population count aged 15 years and over by statistical area 2 for the main means of travel to work variable from the 2018 Census. The geography corresponds to 2018 boundaries.

This dataset is the base data for the ‘There and back again: our daily commute’ competition.

This 2018 Census commuter view dataset is displayed by statistical area 2 geography and contains from-to (journey) information on an individual's usual residence and workplace address* by main means of travel to work.

* Workplace address is coded from information supplied by respondents about their workplaces. Where respondents do not supply sufficient information, their responses are coded to ‘not further defined’. The 2018 Census commuter view datasets excludes these ‘not further defined’ areas, as such the sum of the counts for each region in this dataset may not be equal to the total employed census usually resident population count aged 15 years and over for that region.

It is recommended that this dataset be downloaded as either a CSV or a file geodatabase.

This dataset can be used in conjunction with the following spatial files by joining on the statistical area 2 code values:

· Statistical Area 2 2018 (generalised)

· Statistical Area 2 2018 (Centroid Inside)

The data uses fixed random rounding to protect confidentiality. Counts of less than 6 are suppressed according to 2018 confidentiality rules. Values of -999 indicate suppressed data.

Data quality ratings for 2018 Census variables, summarising the quality rating and priority levels for 2018 Census variables, are available.

For information on the statistical area 2 geography please refer to the Statistical standard for geographic areas 2018.

Table ID 104720
Data type Table
Row count 50870
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 308