2018 Census occupied and unoccupied private dwellings by Territorial Authority and Auckland Local Board Areas

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5419
82
Added
27 Sep 2019

This dataset was first added to Stats NZ Geographic Data Service on 27 Sep 2019.

This dataset contains occupied and unoccupied private dwelling counts from the 2006, 2013, and 2018 Censuses, with percentage changes between the 2013 2018 Censuses, by territorial authority and Auckland local board areas.

These territorial authority and Auckland local board area boundaries extend to the 12 mile limit and are as at 1 January 2018, for further information see Territorial Authority Local Board 2018 (generalised).

This data uses fixed random rounding to protect confidentiality, for further information see 2018 confidentiality rules.

Note: the 2018 Census counted fewer dwellings in the Marlborough district than existed at census time. This was mainly in the Marlborough Sounds. If you intend to use dwelling counts at this geography, please contact censusrequests@stats.govt.nz for more information.

For further information see the attachments below: Information about the data (2018 census private dwellings by TALB2018), 2018 census private dwellings by TALB2018 lookup, 2018 Census private dwellings by TALB2018.

Layer ID 103906
Data type Vector multipolygon
Feature count 88
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Māori Electoral District 2007

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5465
18
Added
15 Oct 2019

This dataset was first added to Stats NZ Geographic Data Service on 15 Oct 2019.

Māori Electoral District 2007 is the definitive set of 2007 Māori electoral district boundaries as defined by the Representation Commission. Land Information New Zealand (LINZ) and Stats NZ are the custodians. These boundaries comprise the Māori electoral districts as constituted under the Electoral Act 1993. Māori electoral districts extend to the 12-mile limit and are defined at meshblock level. The number of Māori electoral districts, and Māori electoral populations for each electorate, are calculated using formula in the Electoral Act 1993. The Representation Commission is convened by the Surveyor-General every five years following a Census of Population and Dwellings, and Māori Electoral Option. Its role is to re-draw electoral boundaries to make sure each electorate has about the same number of people. When setting the boundaries, the Representation Commission also considers existing boundaries, community of interest (including iwi affiliations), the infrastructure that links communities (such as main roads), topographical features, and any projected variation in the population of those districts during their existence. Māori Electoral District is a flat classification 7 categories These boundaries were used for the 2008 and 2011 New Zealand general elections.

This layer has been generalised, i.e. simplified for rapid drawing and is designed for thematic or web mapping purposes.

Layer ID 104066
Data type Vector multipolygon
Feature count 7
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2020 (Centroid Inside)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5257
37
Updated
30 Jun 2020

This dataset was last updated on Stats NZ Geographic Data Service on 30 Jun 2020.

This dataset contains the inside centroid point layer for the annually released statistical area 2 (SA2) boundaries as at 1 January 2020.The "inside" centroid is a point which always falls inside each SA2 polygon as this is often desirable. The placement of the point is typically in the widest part of the polygon. The algorithms used are proprietary to ESRI and are related to label placement. Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the SA2 geometry. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 104426
Data type Vector point
Feature count 2239
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Māori Electoral District 2014

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5240
51
Added
15 Oct 2019

This dataset was first added to Stats NZ Geographic Data Service on 15 Oct 2019.

Māori Electoral District 2014 is the definitive set of 2014 Māori electoral district boundaries as defined by the Representation Commission. Land Information New Zealand (LINZ) and Stats NZ are the custodians. These boundaries comprise the Māori electoral districts as constituted under the Electoral Act 1993. Māori electoral districts extend to the 12-mile limit and are defined at meshblock level. The number of Māori electoral districts, and Māori electoral populations for each electorate, are calculated using formula in the Electoral Act 1993. The Representation Commission is convened by the Surveyor-General every five years following a Census of Population and Dwellings, and Māori Electoral Option. Its role is to re-draw electoral boundaries to make sure each electorate has about the same number of people. When setting the boundaries, the Representation Commission also considers existing boundaries, community of interest (including iwi affiliations), the infrastructure that links communities (such as main roads), topographical features, and any projected variation in the population of those districts during their existence. Māori Electoral District is a flat classification 7 categories These boundaries were used for the 2014 and 2017 New Zealand general elections.

This layer has been generalised, i.e. simplified for rapid drawing and is designed for thematic or web mapping purposes.

Layer ID 104063
Data type Vector multipolygon
Feature count 7
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Subdivision 2020 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5128
38
Updated
02 Feb 2020

This dataset was last updated on Stats NZ Geographic Data Service on 02 Feb 2020.

This dataset is the definitive set of annually released (territorial authority) subdivision boundaries for 2020, as defined by the territorial authorities and/or Local Government Commission and maintained by Stats NZ (the custodian). This version contains 145 categories.

Subdivisions are set up under the Local Government Act 2002 and Local Electoral Act 2001. A subdivision is a division of a community or local board area for electoral purposes. Subdivisions are defined at meshblock level, and do not coincide with the statistical area 1 (SA1) geography or the statistical area 2 (SA2) geography. A number of territorial authorities do not have subdivisions, and if they do, the subdivisions do not necessarily cover the whole territorial authority area. Subdivisions nest within community or local boards. Where a community or local board is divided into subdivisions all of the community or local board area must be included in a subdivision.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104259
Data type Vector multipolygon
Feature count 145
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 2020 (Centroid True)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4998
40
Added
19 Jan 2020

This dataset was first added to Stats NZ Geographic Data Service on 19 Jan 2020.

This dataset contains the true centroid point layer for the annually released statistical area 1 (SA1) boundaries as at 1 January 2020.The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the location of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the SA1 polygon, depending on the shape of the polygon.The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 104427
Data type Vector point
Feature count 29879
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

General Electorates 2020

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4570
443
Added
08 Apr 2020

This dataset was first added to Stats NZ Geographic Data Service on 08 Apr 2020.

These boundaries comprise the 65 general electorates released by the Representation Commission in April 2020. These boundaries will be used for the 2020 and 2023 general elections.

The Representation Commission is convened by the Surveyor-General, its role is to re-draw electorate boundaries to make sure each electorate has about the same number of people. We calculate the general electoral population, number of general electorates, and North Island and South Island electoral quotas using the formula specified in the Electoral Act 1993. When setting the boundaries, the Representation Commission also considers existing boundaries, communities of interest, the infrastructure that links communities (such as main roads), topographical features, and any projected variation in the population of those electorates during their existence.

Data is provided with tohutō/macrons (UTF-8 format). To support users with the compatibility of the data and the applications they might be using, additional fields are also provided in ASCII format.

Meshblocks, which aggregate to form electorates, are updated annually by Stats NZ. The 2020 electorate boundaries reflect a number of minor technical adjustments to meshblock boundaries, not involving population i.e. to follow the correct line of a river or road. The adjustments are visible in a small number of land and coastal areas where electorate boundaries otherwise unchanged between 2014 and 2020 do not exactly align.

Layer ID 104580
Data type Vector multipolygon
Feature count 65
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Community Board 2020 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4809
47
Updated
02 Feb 2020

This dataset was last updated on Stats NZ Geographic Data Service on 02 Feb 2020.

This dataset contains annually released community board and local board boundaries for 2020 as defined by the territorial authorities and Local Government Commission but maintained by Stats NZ (the custodian), clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 187 categories.

Community boards are set up under the Local Government Act 2002 and Local Electoral Act 2001. Their purpose is to administer the affairs of communities with populations not less than 1,500 within rural, urban, or metropolitan districts of a territorial authority.

Local boards also fall within the community board classification. Local boards were introduced as part of the new local government arrangements for Auckland in 2010. Local boards share governance with a council’s governing body and each has complementary responsibilities, guaranteed by legislation. There are 21 local boards in the Auckland Council.

Names are provided with and without tohutō/macrons. The column name for those without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104260
Data type Vector multipolygon
Feature count 187
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Community Board 2020 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4787
68
Updated
02 Feb 2020

This dataset was last updated on Stats NZ Geographic Data Service on 02 Feb 2020.

This dataset is the definitive set of annually released community board and local board boundaries for 2020 as defined by the territorial authorities and/or Local Government Commission and maintained by Stats NZ (the custodian). This version contains 187 categories.

Community boards are set up under the Local Government Act 2002 and Local Electoral Act 2001. Their purpose is to administer the affairs of communities with populations not less than 1,500 within rural, urban, or metropolitan districts of a territorial authority.

Local boards also fall within the community board classification. Local boards were introduced as part of the new local government arrangements for Auckland in 2010. Local boards share governance with a council’s governing body and each has complementary responsibilities, guaranteed by legislation. There are 21 local boards in the Auckland Council.

Names are provided with and without tohutō/macrons. The column name for those without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104261
Data type Vector multipolygon
Feature count 187
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Māori Constituency 2020 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4808
25
Updated
30 Jan 2020

This dataset was last updated on Stats NZ Geographic Data Service on 30 Jan 2020.

This dataset contains the annually released regional council Māori constituency boundaries for 2020 as defined by the regional councils and/or Local Government Commission, and maintained by Stats NZ (the custodian). This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 20 categories.

This version contains 5 Māori constituencies, excluding area outside constituency.Māori constituencies are established under the Local Electoral Act 2001 and result from the division of a region for electoral purposes.Māori constituencies are divisions of regional council areas. They are created, based on population, to be the voting areas within councils. Māori constituencies are defined at meshblock level.If a regional council decides to have a Māori constituency, the constituencies within the council are known as general constituencies and Māori constituencies.

Names are provided with and without tohutō/macrons. The column name for those without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104248
Data type Vector multipolygon
Feature count 20
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 161 to 170 of 365