Urban Accessibility Indicator 2021 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

19531
63
Added
06 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 06 Dec 2020.

The urban accessibility (UA) classification measures the degree of urban influence New Zealand’s urban areas have on surrounding rural areas. It classifies the geographic accessibility of rural statistical area 1s (SA1s) and small urban areas according to their proximity, or degree of remoteness, to larger urban areas. This classification provides increased understanding of the heterogeneity of rural areas and small urban areas and will allow more extensive analysis and reporting. Understanding the degree of urban accessibility or remoteness is important as it has a major influence on the employment sector, accessibility to services, and population composition and change.

The methodology uses drive time from an SA1 address weighted centroid to the outside boundary of the nearest major, large, and medium urban area (from Stats NZ urban rural (UR) classification) to classify rural SA1s and small urban areas to one of five categories of accessibility or remoteness. The Open Source Routing Machine service using the OpenStreetMap road network is used to calculate the drive times.

A concordance between SA1 and Urban Accessibility can be found on Aria.

Urban accessibility indicator is also available as an attribute on Statistical Area 1 Higher Geographies 2021 (generalised).

Rural SA1s and small urban areas are classified to the following categories:

·High urban accessibility:
0 to15 minutes from major urban areas

·Medium urban accessibility:
15 to 25 minutes from major urban areas
0 to 25 minutes from large urban areas
0 to 15 minutes from medium urban areas

·Low urban accessibility:
25 to 60 minutes from major or large urban areas
15 to 60 minutes from medium urban areas

·Remote:
60 to 120 minutes from major, large or medium urban areas

·Very remote:
more than 120 minutes from major, large or medium urban areas

For more information refer to: Urban accessibility - methodology and classification.

The full classification is shown below:

111 Major urban area

112 Large urban area

113 Medium urban area

221 High urban accessibility

222 Medium urban accessibility

223 Low urban accessibility

224 Remote

225 Very remote

331 Inland water

332 Inlet

333 Oceanic

Areas of 221 High urban accessibility and 222 Medium urban accessibility may be regarded as peri-urban in nature and combined with urban areas for analytical purposes.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105155
Data type Vector multipolygon
Feature count 11
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Ethnic group by meshblock (2013 Census)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

17384
361
Added
11 Dec 2015

This dataset was first added to Stats NZ Geographic Data Service on 11 Dec 2015.

2013 Census meshblock dataset contains counts at meshblock levels for selected variables from the 2013 Census. The geographies correspond to 2013 Census boundaries. The counts are at the highest level of each variable’s classification.

Notes:
Confidentiality rules have been applied to all cells in this table, including randomly rounding to base 3.
-999 indicates cells have been suppressed for confidentiality reasons.
-995 indicates cells that could not be calculated.

Layer ID 8448
Data type Vector multipolygon
Feature count 46621
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

2013 Census counts by Statistical Area 2 2018

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

17414
272
Updated
22 May 2018

This dataset was last updated on Stats NZ Geographic Data Service on 22 May 2018.

The 2013 Census usually resident population count, household, and occupied dwellings (private and non-private) data has been rebased to the 2018 meshblock geography and is shown according to the new statistical geographies and urban rural classification developed as a result of the Statistical Standard for Geographic Areas 2018 (SSGA18) review. The data is experimental and is provided as a guide to understanding the impact of the new geographic boundaries on the previous census counts.
Note: This data has been randomly rounded to protect confidentiality. Individual figures may not add up to totals, and values for the same data may vary in different tables.
For further information see the attachments below: Information about data; 2013 Census counts on SA22018 lookup; and ANZLIC Metadata 2018 Statistical Area 2.
For 2013 Census usually resident population counts by statistical area 2 2018 and area unit 2013 see attachment: Census 2013 population counts by SA22018 and AU2013.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

Layer ID 92226
Data type Vector multipolygon
Feature count 2253 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2018 (Centroid Inside)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

17321
345
Updated
17 May 2018

This dataset was last updated on Stats NZ Geographic Data Service on 17 May 2018.

Statistical Area 2 2018 (Centroid Inside) is the inside centroid point layer for the major released version of the annually released statistical area 2 (SA2) boundaries for 2018.
The "inside" centroid is a point which always falls inside each SA2 polygon as this is often desirable in some users cases. The placement of the point is typically in the widest part of the polygon. The algorithms used are proprietary to ESRI and are related to label placement. Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the Meshblock geometry. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

Layer ID 93619
Data type Vector point
Feature count 2237
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 2018 (high definition)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

17085
466
Added
01 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 01 Dec 2017.

This dataset is a high definition (HD) version of the annually released meshblock boundaries at 1 January 2018. This HD version is the most detailed geometry, suitable for use in GIS for geometric analysis operations and for the computation of areas, centroids and other metrics. The HD version is aligned to the LINZ cadastre. Stats NZ maintains an annual meshblock geography for collecting and producing statistical data. This allows data to be compared over time. A meshblock is the smallest geographic unit for which statistical data is collected and processed by Stats NZ. A meshblock is defined by a geographic area, which can vary in size from part of a city block to a large area of rural land. Each meshblock borders on another to form a network covering all of New Zealand, including coasts and inlets and extending out to the 200-mile economic zone. Meshblocks are added together to build up larger geographic areas such as statistical area 1 (SA1), statistical area 2 (SA2), and urban rural. They are also used to define electoral districts, territorial authorities, and regional councils. The digital geographic boundaries are defined and maintained by Stats NZ. Meshblocks cover the land area of New Zealand, the water area to the 12-mile limit, the Chatham Islands, Kermadec Islands, sub-Antarctic islands, off-shore oil rigs, and Ross Dependency.

Digital boundary data became freely available on 1 July 2007.

There are 16 meshblocks not held in digitised form.

For further information see ANZLIC Metadata 2018 Meshblock attachment below.

Layer ID 92199
Data type Vector multipolygon
Feature count 53589 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 2021 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

16911
551
Updated
07 May 2021

This dataset was last updated on Stats NZ Geographic Data Service on 07 May 2021.

This dataset is the definitive set of annually released meshblock boundaries for 2021 as defined by Stats NZ. This version contains 53,598 meshblocks.

Stats NZ maintains an annual meshblock geography for collecting and producing statistical data. This allows data to be compared over time. A meshblock is the smallest geographic unit for which statistical data is collected and processed by Stats NZ. A meshblock is defined by a geographic area, which can vary in size from part of a city block to a large area of rural land. Each meshblock borders on another to form a network covering all of New Zealand, including coasts and inlets and extending out to the 200-mile economic zone. Meshblocks are added together to build up larger geographic areas such as statistical area 1 (SA1), statistical area 2 (SA2), and urban rural. They are also used to define electoral districts, territorial authorities, and regional councils.

The following 16 meshblocks are outside the 12 mile limit and are not held in digitised form: 0016901, 0016902, 1588000, 3166401, 3166402, 3166600, 3166710, 3166711, 3195000, 3196001, 3196002, 3196003, 3196004, 3196005, 3196006, 3196007.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

The meshblock classification can also be downloaded from the Stats NZ classification and concordance tool Ariā.

Layer ID 105176
Data type Vector multipolygon
Feature count 53598 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Territorial Authority 2019 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

16543
693
Updated
03 May 2019

This dataset was last updated on Stats NZ Geographic Data Service on 03 May 2019.

This dataset is the definitive set of annually released territorial authority boundaries at 1 January 2019 as defined by the territorial authorities and/or Local Government Commission, and maintained by Stats NZ. A territorial authority is defined under the Local Government Act 2002 as a city or a district council. Territorial authorities are the second tier of local government in New Zealand, below regional councils.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2019 Territorial Authority attachment below.

Layer ID 98755
Data type Vector multipolygon
Feature count 68
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 2017 (generalised version)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

16974
178
Added
09 Feb 2017

This dataset was first added to Stats NZ Geographic Data Service on 09 Feb 2017.

This dataset is the definitive set of meshblock boundaries for 2017 as defined by Statistics New Zealand.

Statistics New Zealand maintains an annual meshblock pattern for collecting and producing statistical data. This allows data to be compared over time. A meshblock is the smallest geographic unit for which statistical data is collected and processed by Statistics New Zealand. A meshblock is defined by a geographic area, which can vary in size from part of a city block to a large area of rural land. Each meshblock borders on another to form a network covering all of New Zealand, including coasts and inlets and extending out to the 200-mile economic zone. Meshblocks are added together to build up larger geographic areas such as area units and urban areas. They are also used to define electoral districts, territorial authorities, and regional councils.

Layer ID 27774
Data type Vector multipolygon
Feature count 50613 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 2018 (Centroid True)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

16640
191
Added
11 Jan 2018

This dataset was first added to Stats NZ Geographic Data Service on 11 Jan 2018.

MB2018_V1_00_Centroid_True is the true centroid point layer for the major released version of the annually released meshblock boundaries for 2018. The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the locations of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the meshblock polygon, depending on the shape of the polygon. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection. Non-digitised meshblocks cannot have a centroid.

Layer ID 93612
Data type Vector point
Feature count 53573
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2018 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

15695
1100
Updated
17 May 2018

This dataset was last updated on Stats NZ Geographic Data Service on 17 May 2018.

This dataset is the definitive set of statistical area 2 (SA2) boundaries at 1 January 2018, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. SA2 is a new output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. SA2s are defined at meshblock and SA1 levels.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Statistical Area 2 attachment below.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

Layer ID 92213
Data type Vector multipolygon
Feature count 2171
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 21 to 30 of 417