Statistical Area 1 2021 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2122
73
Added
07 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 07 Dec 2020.

This dataset is the definitive set of annually released statistical area 1 (SA1) boundaries for 2021 as defined by Stats NZ. This version contains 29,910 SA1 categories.

SA1s were introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaced the New Zealand Standard Areas Classification (NZSAC92). SA1 is a new output geography that allows the release of more detailed information about population characteristics than is available at the meshblock level.

Built by joining meshblocks, SA1s have an ideal size range of 100–200 residents, and a maximum population of about 500. This is to minimise suppression of population data in multivariate statistics tables. SA1s either define or aggregate to define SA2s, urban rural areas, territorial authorities, and regional councils. Some SA1s that contain apartment blocks, retirement villages, and large non-residential facilities have more than 500 residents.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

The SA1 classification can also be downloaded from the Stats NZ classification and concordance tool Ariā.

Layer ID 105162
Data type Vector multipolygon
Feature count 29910 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Urban Rural 2021 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1275
93
Added
06 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 06 Dec 2020.

This dataset contains the annually released urban rural boundaries for 2021, as defined by Stats NZ, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 668 urban rural categories.

The urban rural geography was introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaced the New Zealand Standard Areas Classification (NZSAC92). The urban rural geography replaces the (NZSAC92) urban area geography. Urban rural is an output geography that classifies New Zealand into areas that share common urban or rural characteristics and is used to disseminate a broad range of Stats NZ’s social, demographic and economic statistics.

The urban rural indicator complements the urban rural geography and is an attribute in this dataset. Further information on the urban rural indicator is available on the Stats NZ classification and coding tool ARIA.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105159
Data type Vector multipolygon
Feature count 668
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Urban Rural 2021 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2494
131
Added
06 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 06 Dec 2020.

This dataset is the definitive set of annually released urban rural boundaries for 2021 as defined by Stats NZ. This version contains 722 urban rural categories.

The urban rural geography was introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaced the New Zealand Standard Areas Classification (NZSAC92). The urban rural geography replaces the (NZSAC92) urban area geography.

Urban rural is an output geography that classifies New Zealand into areas that share common urban or rural characteristics and is used to disseminate a broad range of Stats NZ’s social, demographic and economic statistics.

The urban rural indicator complements the urban rural geography and is an attribute in this dataset. Further information on the urban rural indicator is available on the Stats NZ classification and coding tool ARIA.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105158
Data type Vector multipolygon
Feature count 722 (incl. 4 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Māori Ward 2021 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1171
5
Added
06 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 06 Dec 2020.

This dataset is the definitive set of Māori ward boundaries for 2021 as defined by the territorial authorities and/or Local Government Commission but maintained by Stats NZ (the custodian). This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 68 categories.

The Local Electoral Act 2001 provides that Māori wards may be established in territorial authorities. The statutory provisions for establishing Māori wards are set out in sections 19Z to 19ZH of the Local Electoral Act 2001. The first Māori ward was established by representation review in 2019 and appears in the 2020 geographic boundaries released by Stats NZ. The first Māori ward to be created is Wairoa Māori ward (02901) in the Wairoa District. Māori ward boundaries are defined at meshblock level.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105157
Data type Vector multipolygon
Feature count 68
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Māori Ward 2021 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1164
10
Added
06 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 06 Dec 2020.

This dataset is the definitive set of Māori ward boundaries for 2021 as defined by the territorial authorities and/or Local Government Commission but maintained by Stats NZ (the custodian). This version contains 68 categories.

The Local Electoral Act 2001 provides that Māori wards may be established in territorial authorities. The statutory provisions for establishing Māori wards are set out in sections 19Z to 19ZH of the Local Electoral Act 2001. The first Māori ward was established by representation review in 2019 and appears in the 2020 geographic boundaries released by Stats NZ. The first Māori ward to be created is Wairoa Māori ward (02901) in the Wairoa District. Māori ward boundaries are defined at meshblock level.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105156
Data type Vector multipolygon
Feature count 68
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Urban Accessibility Indicator 2021 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1432
25
Added
06 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 06 Dec 2020.

The urban accessibility (UA) classification measures the degree of urban influence New Zealand’s urban areas have on surrounding rural areas. It classifies the geographic accessibility of rural statistical area 1s (SA1s) and small urban areas according to their proximity, or degree of remoteness, to larger urban areas. This classification provides increased understanding of the heterogeneity of rural areas and small urban areas and will allow more extensive analysis and reporting. Understanding the degree of urban accessibility or remoteness is important as it has a major influence on the employment sector, accessibility to services, and population composition and change.

The methodology uses drive time from an SA1 address weighted centroid to the outside boundary of the nearest major, large, and medium urban area (from Stats NZ urban rural (UR) classification) to classify rural SA1s and small urban areas to one of five categories of accessibility or remoteness. The Open Source Routing Machine service using the OpenStreetMap road network is used to calculate the drive times.

A concordance between SA1 and Urban Accessibility can be found on Aria.

Urban accessibility indicator is also available as an attribute on Statistical Area 1 Higher Geographies 2021 (generalised).

Rural SA1s and small urban areas are classified to the following categories:

·High urban accessibility:
0 to15 minutes from major urban areas

·Medium urban accessibility:
15 to 25 minutes from major urban areas
0 to 25 minutes from large urban areas
0 to 15 minutes from medium urban areas

·Low urban accessibility:
25 to 60 minutes from major or large urban areas
15 to 60 minutes from medium urban areas

·Remote:
60 to 120 minutes from major, large or medium urban areas

·Very remote:
more than 120 minutes from major, large or medium urban areas

For more information refer to: Urban accessibility - methodology and classification.

The full classification is shown below:

111 Major urban area

112 Large urban area

113 Medium urban area

221 High urban accessibility

222 Medium urban accessibility

223 Low urban accessibility

224 Remote

225 Very remote

331 Inland water

332 Inlet

333 Oceanic

Areas of 221 High urban accessibility and 222 Medium urban accessibility may be regarded as peri-urban in nature and combined with urban areas for analytical purposes.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105155
Data type Vector multipolygon
Feature count 11
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Territorial Authority 2021 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1445
208
Added
06 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 06 Dec 2020.

This dataset is the definitive set of annually released territorial authority boundaries for 2021 as defined the territorial authorities and/or Local Government Commission and maintained by Stats NZ (the custodian). This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 68 categories.

A territorial authority is defined under the Local Government Act 2002 as a city or a district council. There are 67 territorial authorities in New Zealand. Some territorial authority boundaries are coterminous with regional council boundaries but there are several exceptions. An example is Taupo District, which is split between four regions, although most of its area falls within the Waikato Region. Territorial authorities are defined at meshblock, statistical area 1 (SA1) and statistical area 2 (SA2) levels.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105154
Data type Vector multipolygon
Feature count 68
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Territorial Authority 2021 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3718
293
Added
06 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 06 Dec 2020.

This dataset is the definitive set of annually released territorial authority boundaries for 2021 as defined the territorial authorities and/or Local Government Commission and maintained by Stats NZ (the custodian). This version contains 68 categories.

A territorial authority is defined under the Local Government Act 2002 as a city or a district council. There are 67 territorial authorities in New Zealand. Some territorial authority boundaries are coterminous with regional council boundaries but there are several exceptions. An example is Taupo District, which is split between four regions, although most of its area falls within the Waikato Region. Territorial authorities are defined at meshblock, statistical area 1 (SA1) and statistical area 2 (SA2) levels.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105153
Data type Vector multipolygon
Feature count 68
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Māori Constituency 2021 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1194
12
Added
04 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 04 Dec 2020.

This dataset is the definitive set of annually released regional council Māori constituency boundaries for 2021 as defined by the regional councils and/or Local Government Commission, and maintained by Stats NZ (the custodian). This version contains 20 categories.

This version contains 5 Māori constituencies, excluding area outside constituency. Māori constituencies are established under the Local Electoral Act 2001 and result from the division of a region for electoral purposes. Māori constituencies are divisions of regional council areas. They are created, based on population, to be the voting areas within councils. Māori constituencies are defined at meshblock level. If a regional council decides to have a Māori constituency, the constituencies within the council are known as general constituencies and Māori constituencies.

Names are provided with and without tohutō/macrons. The column name for those without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105149
Data type Vector multipolygon
Feature count 20
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Constituency 2021 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1190
44
Added
03 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2020.

This dataset contains the annually released regional council constituency boundaries for 2021, as defined by the regional councils and/or Local Government Commission and maintained by Stats NZ (the custodian), clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 64 categories.

Constituencies are established under the Local Electoral Act 2001 and result from the division of a region for electoral purposes.If a regional council decides to have a Māori constituency, the constituencies within the council are known as general constituencies and Māori constituencies.Constituencies are divisions of regional council areas. They are defined at meshblock level, and do not coincide with the statistical area 1 (SA1) geography or the statistical area 2 (SA2) geography. They are created, based on population, to be the voting areas within councils. Constituencies are required to reflect communities of interest. Their boundaries, so far as is practicable, coincide with those of territorial authorities or wards.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105145
Data type Vector multipolygon
Feature count 64
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 21 to 30 of 81