Statistical Area 1 2021 (Centroid Inside)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1151
9
Added
07 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 07 Dec 2020.

This dataset contains the inside centroid point layer for the annually released statistical area 1 (SA1) boundaries as at 1 January 2021. The "inside" centroid is a point which always falls inside each SA1 polygon as this is often desirable. The placement of the point is typically in the widest part of the polygon. The algorithms used are proprietary to ESRI and are related to label placement. Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the SA1 geometry. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 105165
Data type Vector point
Feature count 29894
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Ward 2020 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4176
89
Updated
22 Sep 2020

This dataset was last updated on Stats NZ Geographic Data Service on 22 Sep 2020.

This dataset contains the annually released ward boundaries for 2020 as defined by the territorial authorities and/or Local Government Commission, and maintained by Stats NZ (the custodian), clipped to the coastline.This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 239 categories.

Wards were originally set up within any territorial authority with a population of at least 20,000. Wards are defined under the Local Electoral Act 2001 and result from dividing a territorial authority for electoral purposes. The ward system was designed to allow for the recognition of communities within a territorial authority and to increase community involvement in the local government system.Territorial authorities can now choose whether they would like to maintain electoral wards. As a result, the number of wards has steadily decreased since they were first created in 1989. Ward boundaries are reviewed in the year before the three-yearly local government elections.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104262
Data type Vector multipolygon
Feature count 239
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Ward 2020 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2448
116
Updated
22 Sep 2020

This dataset was last updated on Stats NZ Geographic Data Service on 22 Sep 2020.

This dataset is the definitive set of annually released ward boundaries for 2020 as defined by the territorial authorities and/or Local Government Commission, and maintained by Stats NZ (the custodian). This version contains 239 categories.

Wards were originally set up within any territorial authority with a population of at least 20,000. Wards are defined under the Local Electoral Act 2001 and result from dividing a territorial authority for electoral purposes. The ward system was designed to allow for the recognition of communities within a territorial authority and to increase community involvement in the local government system.Territorial authorities can now choose whether they would like to maintain electoral wards. As a result, the number of wards has steadily decreased since they were first created in 1989. Ward boundaries are reviewed in the year before the three-yearly local government elections.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104263
Data type Vector multipolygon
Feature count 239
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Urban Rural 2020 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1606
117
Updated
30 Jan 2020

This dataset was last updated on Stats NZ Geographic Data Service on 30 Jan 2020.

This dataset contains the annually released urban rural boundaries for 2020, as defined by Stats NZ, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 668 UR categories.

The urban rural geography was introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaced the New Zealand Standard Areas Classification (NZSAC92). The urban rural geography replaces the (NZSAC92) urban area geography. Urban rural is an output geography that classifies New Zealand into areas that share common urban or rural characteristics and is used to disseminate a broad range of Stats NZ’s social, demographic and economic statistics.

Update: Following the 2018 Census ten rural settlements were reclassified as small urban areas in the Urban Rural 2020 classification. These are: Haruru, Ngunguru, Waipu, Parakai, Patumahoe Village, Pauanui, Pirongia, Mapua, Clyde and Lake Hawea.

The urban rural indicator complements the urban rural geography and is an attribute in this dataset. Further information on the urban rural indicator is available on the Stats NZ classification and coding tool ARIA.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104268
Data type Vector multipolygon
Feature count 668
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Urban Rural 2020 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12486
571
Updated
30 Jan 2020

This dataset was last updated on Stats NZ Geographic Data Service on 30 Jan 2020.

This dataset is the definitive set of annually released urban rural boundaries for 2020 as defined by Stats NZ. This version contains 721 urban rural categories.

The urban rural geography was introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaced the New Zealand Standard Areas Classification (NZSAC92). The urban rural geography replaces the (NZSAC92) urban area geography.

Urban rural is an output geography that classifies New Zealand into areas that share common urban or rural characteristics and is used to disseminate a broad range of Stats NZ’s social, demographic and economic statistics.

Update: Following the 2018 Census ten rural settlements were reclassified as small urban areas in the Urban Rural 2020 classification. These are: Haruru, Ngunguru, Waipu, Parakai, Patumahoe Village, Pauanui, Pirongia, Mapua, Clyde and Lake Hawea.

The urban rural indicator complements the urban rural geography and is an attribute in this dataset. Further information on the urban rural indicator is available on the Stats NZ classification and coding tool ARIA.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104269
Data type Vector multipolygon
Feature count 721 (incl. 4 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Estimated Resident Population at 30 June 2018 by Regional Council

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1649
51
Added
21 Sep 2020

This dataset was first added to Stats NZ Geographic Data Service on 21 Sep 2020.

This dataset contains information on:

· Estimated resident population (ERP) at 30 June 1996, 2001, 2006, 2013, and 2018 for total population

· ERP at 30 June 2018 by ethnic groups (European or Other (including New Zealander), Māori, Pacific, Asian, and Middle Eastern/Latin American/African) – estimates and percentage

· Sex ratio – number of males per 100 females

· ERP at 30 June 2018 by broad age groups and median age

· Geographies available are regional council areas, territorial authority and Auckland local board areas, Statistical Area 2, and urban rural.

Note: The geography corresponds to 2020 boundaries

Note: -999 indicates data are not available.

About the estimated resident population

The estimated resident population at 30 June in the census year is based on the census usually resident population count, with updates for:

· net census undercount (as measured by a post-enumeration survey)

· residents temporarily overseas on census night

· births, deaths and net migration between census night and 30 June

· reconciliation with demographic estimates at the youngest ages.

The estimated resident population is not directly comparable with the census usually resident population count because of these adjustments.

For more detailed information about the methods used to calculate each base population, see DataInfo+ Demographic estimates.

Ethnic groups

It is important to note that these ethnic groups are not mutually exclusive because people can and do identify with more than one ethnicity. People who identify with more than one ethnicity have been included in each ethnic group.

The 'Māori', 'Pacific', 'Asian' and 'Middle Eastern/Latin American/African' ethnic groups are defined in level 1 of the Ethnicity New Zealand Standard Classification 2005. The estimates for the 'European or Other (including New Zealander)' group include people who belong to the 'European' or 'Other ethnicity' groups defined in level 1 of the standard classification. If a person belongs to both the 'European' and 'Other ethnicity' groups they have only been counted once. Almost all people in the 'Other ethnicity' group belong to the 'New Zealander' sub-group.

Time series

This time series is irregular. Because the 2011 Census was cancelled after the Canterbury earthquake on 22 February 2011, the gap between the 2006-base and 2013-base estimated resident population is seven years. The change in data between 2006 and 2013 may be greater than in the usual five-year gap between censuses. Be careful when comparing trends.

Rounding

Individual figures may not sum to stated totals due to rounding.

More information

See Estimated resident population (2018-base): At 30 June 2018 for commentary about the 2018 ERP.

Subnational population estimates concepts – DataInfo+ provides definitions of terms used in the map.

Access more population estimates data in NZ.Stat:

Theme: Population estimates.

Layer ID 105007
Data type Vector multipolygon
Feature count 17
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 Higher Geographies 2020 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3531
133
Updated
29 Jun 2020

This dataset was last updated on Stats NZ Geographic Data Service on 29 Jun 2020.

This dataset is the definitive version of annually released statistical area 2 (SA2) boundaries concorded to higher geographies for 2020 as defined by Stats NZ. this version contains 2,255 categories.

This statistical area 2 higher geographies file is a correspondence, or concordance, which relates SA2s to larger geographic areas or 'higher geographies'. The higher geographies contained in this concordance are: territorial authority (TA) and regional council (REGC). For more information on the individual higher geographies, refer to each geography’s metadata.

SA2s were introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA2018) which replaced the New Zealand Standard Areas Classification (NZSAC1992). The SA2 geography replaces the (NZSAC1992) area unit geography.

Names are provided with and without tohutō/macrons, as applicable. Column names for those without macrons are suffixed ‘ascii’. For further information on individual higher geographies, refer to each geography’s metadata.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104275
Data type Vector multipolygon
Feature count 2255 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2020 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3961
172
Updated
28 Jun 2020

This dataset was last updated on Stats NZ Geographic Data Service on 28 Jun 2020.

This dataset contains the annually released statistical area 2 (SA2) boundaries for 2020 as defined by Stats NZ, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 2,173 SA2 categories.

SA2s were introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA2018) which replaced he New Zealand Standard Areas Classification (NZSAC1992). The SA2 geography replaces the (NZSAC1992) area unit geography. This version contains 2,173 SA2s.

SA2 is an output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. The SA2 geography aims to reflect communities that interact together socially and economically. In populated areas, SA2s generally contain similar sized populations.

SA2s are built from SA1s and either define or aggregate to define urban rural areas, territorial authorities, and regional councils. SA2s in city council areas generally have a population of 2,000–4,000 residents while SA2s in district council areas generally have a population of 1,000–3,000 residents. In rural areas, many SA2s have fewer than 1,000 residents because they are in conservation areas or contain sparse populations that cover a large area.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104270
Data type Vector multipolygon
Feature count 2173
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2020 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11271
709
Updated
25 Jun 2020

This dataset was last updated on Stats NZ Geographic Data Service on 25 Jun 2020.

This dataset is the definitive set of statistical area 2 (SA2) boundaries for 2020 as defined by Stats NZ. This version contains 2,255 SA2 categories.

SA2s were introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA2018) which replaced the New Zealand Standard Areas Classification (NZSAC1992). The SA2 geography replaces the (NZSAC1992) area unit geography.

SA2 is an output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. The SA2 geography aims to reflect communities that interact together socially and economically. In populated areas, SA2s generally contain similar sized populations.

SA2s are built from SA1s and either define or aggregate to define urban rural areas, territorial authorities, and regional councils. SA2s in city council areas generally have a population of 2,000–4,000 residents while SA2s in district council areas generally have a population of 1,000–3,000 residents. In rural areas, many SA2s have fewer than 1,000 residents because they are in conservation areas or contain sparse populations that cover a large area.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104271
Data type Vector multipolygon
Feature count 2255 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

2018 Census Main means of travel to work by Statistical Area 2

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4957
866
Added
14 Jun 2020

This dataset was first added to Stats NZ Geographic Data Service on 14 Jun 2020.

The 2018 Census commuter view dataset contains the employed census usually resident population count aged 15 years and over by statistical area 2 for the main means of travel to work variable from the 2018 Census. The geography corresponds to 2018 boundaries.

This dataset is the base data for the ‘There and back again: our daily commute’ competition.

This 2018 Census commuter view dataset is displayed by statistical area 2 geography and contains from-to (journey) information on an individual's usual residence and workplace address* by main means of travel to work.

* Workplace address is coded from information supplied by respondents about their workplaces. Where respondents do not supply sufficient information, their responses are coded to ‘not further defined’. The 2018 Census commuter view datasets excludes these ‘not further defined’ areas, as such the sum of the counts for each region in this dataset may not be equal to the total employed census usually resident population count aged 15 years and over for that region.

It is recommended that this dataset be downloaded as either a CSV or a file geodatabase.

This dataset can be used in conjunction with the following spatial files by joining on the statistical area 2 code values:

· Statistical Area 2 2018 (generalised)

· Statistical Area 2 2018 (Centroid Inside)

The data uses fixed random rounding to protect confidentiality. Counts of less than 6 are suppressed according to 2018 confidentiality rules. Values of -999 indicate suppressed data.

Data quality ratings for 2018 Census variables, summarising the quality rating and priority levels for 2018 Census variables, are available.

For information on the statistical area 2 geography please refer to the Statistical standard for geographic areas 2018.

Table ID 104720
Data type Table
Row count 50870
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 41 to 50 of 81