Constituency 2018 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5400
46
Added
01 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 01 Dec 2017.

This dataset is the definitive set of annually released regional council constituency boundaries at 1 January 2018 as defined by the regional councils and/or Local Government Commission, and maintained by Stats NZ. Constituencies are established under the Local Electoral Act 2001 and result from the division of a region for electoral purposes. If a regional council decides to have a Māori constituency, the constituencies within the region are known as general constituencies and Māori constituencies. Constituencies are divisions of regional council areas. They are defined at meshblock level.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Constituency attachment below.

Layer ID 92195
Data type Vector multipolygon
Feature count 62
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Constituency 2018 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5132
46
Added
01 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 01 Dec 2017.

This dataset is the definitive set of annually released regional council constituency boundaries at 1 January 2018, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. Constituencies are established under the Local Electoral Act 2001 and result from the division of a region for electoral purposes. If a regional council decides to have a Māori constituency, the constituencies within the region are known as general constituencies and Māori constituencies. Constituencies are divisions of regional council areas. They are defined at meshblock level.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Constituency attachment below.

Layer ID 92196
Data type Vector multipolygon
Feature count 62
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

General Electoral District 2002

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3562
29
Added
18 Mar 2019

This dataset was first added to Stats NZ Geographic Data Service on 18 Mar 2019.

General Electoral District 2002 is the definitive set of 2002 general electoral district boundaries as defined by the Representation Commission. Land Information New Zealand (LINZ) and Stats NZ are the custodians. These boundaries comprise the general electoral districts as constituted under the Electoral Act 1993. General electoral districts extend to the 12-mile limit and are defined at meshblock level. The number of general electoral districts, and electoral populations for each electorate, are calculated using formula in the Electoral Act 1993. The Representation Commission is convened by the Surveyor-General every five years following a Census of Population and Dwellings, and Māori Electoral Option. Its role is to re-draw electoral boundaries to make sure each electorate has about the same number of people. When setting the boundaries, the Representation Commission also considers existing boundaries, community of interest, the infrastructure that links communities (such as main roads), topographical features, and any projected variation in the population of those districts during their existence. General Electoral District is a flat classification with 62 categories. These boundaries were used for the 2002 and 2005 New Zealand general elections.

This layer has been generalised, i.e. simplified for rapid drawing and is designed for thematic or web mapping purposes.

Layer ID 99645
Data type Vector multipolygon
Feature count 62
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock electoral populations 2020 for proposed boundaries

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1272
56
Updated
18 Nov 2019

This dataset was last updated on Stats NZ Geographic Data Service on 18 Nov 2019.

These meshblocks are used as a basis to build the electoral population for each proposed electorate. The electoral populations are calculated using the formula specified in the Electoral Act 1993 and are confidentialised using Stats NZ confidentiality rules. The rules applied to the electoral populations are suppression of all unrounded counts below six (displayed as: ‘-999’) and random rounding to base three. Since the electoral populations of each meshblock are randomly rounded, the count for each meshblock could be different to the raw total by up to two when compared with the total electoral population for meshblocks from another source. Land Information New Zealand (LINZ) and Stats NZ are the data custodians.

Data is provided with tohutō/macrons (UTF-8 format). To support users with the compatibility of the data and the applications they might be using, additional fields are also provided in ASCII format.

Meshblocks, which aggregate to form electorates, are updated annually by Stats NZ. Since the 2013/14 boundary review, a number of meshblock boundaries that coincide with electorate boundaries have been adjusted to a better position i.e. to follow the correct line of a river or road. These minor adjustments do not affect any populations. The adjustments are visible in a small number of land and coastal areas where the current and proposed boundaries do not exactly align. The Representation Commission will be asked to approve these minor adjustments when they fix the boundaries in 2020.

Layer ID 104209
Data type Vector multipolygon
Feature count 53580
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Constituency 2019 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1263
31
Updated
02 May 2019

This dataset was last updated on Stats NZ Geographic Data Service on 02 May 2019.

This dataset is the definitive set of annually released regional council constituency boundaries at 1 January 2019 as defined by the regional councils and/or Local Government Commission, and maintained by Stats NZ. Constituencies are established under the Local Electoral Act 2001 and result from the division of a region for electoral purposes. If a regional council decides to have a Māori constituency, the constituencies within the region are known as general constituencies and Māori constituencies. Constituencies are divisions of regional council areas. They are defined at meshblock level.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2019 Constituency attachment below.

Layer ID 98746
Data type Vector multipolygon
Feature count 62
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Constituency 2019 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1171
29
Updated
02 May 2019

This dataset was last updated on Stats NZ Geographic Data Service on 02 May 2019.

This dataset is the definitive set of annually released regional council constituency boundaries at 1 January 2019, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. Constituencies are established under the Local Electoral Act 2001 and result from the division of a region for electoral purposes. If a regional council decides to have a Māori constituency, the constituencies within the region are known as general constituencies and Māori constituencies. Constituencies are divisions of regional council areas. They are defined at meshblock level.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2019 Constituency attachment below.

Layer ID 98747
Data type Vector multipolygon
Feature count 62
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Māori Electoral District 2014

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1349
31
Added
15 Oct 2019

This dataset was first added to Stats NZ Geographic Data Service on 15 Oct 2019.

Māori Electoral District 2014 is the definitive set of 2014 Māori electoral district boundaries as defined by the Representation Commission. Land Information New Zealand (LINZ) and Stats NZ are the custodians. These boundaries comprise the Māori electoral districts as constituted under the Electoral Act 1993. Māori electoral districts extend to the 12-mile limit and are defined at meshblock level. The number of Māori electoral districts, and Māori electoral populations for each electorate, are calculated using formula in the Electoral Act 1993. The Representation Commission is convened by the Surveyor-General every five years following a Census of Population and Dwellings, and Māori Electoral Option. Its role is to re-draw electoral boundaries to make sure each electorate has about the same number of people. When setting the boundaries, the Representation Commission also considers existing boundaries, community of interest (including iwi affiliations), the infrastructure that links communities (such as main roads), topographical features, and any projected variation in the population of those districts during their existence. Māori Electoral District is a flat classification 7 categories These boundaries were used for the 2014 and 2017 New Zealand general elections.

This layer has been generalised, i.e. simplified for rapid drawing and is designed for thematic or web mapping purposes.

Layer ID 104063
Data type Vector multipolygon
Feature count 7
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Māori Electoral District 2002

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

934
3
Added
15 Oct 2019

This dataset was first added to Stats NZ Geographic Data Service on 15 Oct 2019.

Māori Electoral District 2002 is the definitive set of 2002 Māori electoral district boundaries as defined by the Representation Commission. Land Information New Zealand (LINZ) and Stats NZ are the custodians. These boundaries comprise the Māori electoral districts as constituted under the Electoral Act 1993. Māori electoral districts extend to the 12-mile limit and are defined at meshblock level. The number of Māori electoral districts, and Māori electoral populations for each electorate, are calculated using formula in the Electoral Act 1993. The Representation Commission is convened by the Surveyor-General every five years following a Census of Population and Dwellings, and Māori Electoral Option. Its role is to re-draw electoral boundaries to make sure each electorate has about the same number of people. When setting the boundaries, the Representation Commission also considers existing boundaries, community of interest (including iwi affiliations), the infrastructure that links communities (such as main roads), topographical features, and any projected variation in the population of those districts during their existence. Māori Electoral District is a flat classification with 7 categories These boundaries were used for the 2002 and 2005 New Zealand general elections.

This layer has been generalised, i.e. simplified for rapid drawing and is designed for thematic or web mapping purposes.

Layer ID 104064
Data type Vector multipolygon
Feature count 7
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Māori Electoral District 2007

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1350
8
Added
15 Oct 2019

This dataset was first added to Stats NZ Geographic Data Service on 15 Oct 2019.

Māori Electoral District 2007 is the definitive set of 2007 Māori electoral district boundaries as defined by the Representation Commission. Land Information New Zealand (LINZ) and Stats NZ are the custodians. These boundaries comprise the Māori electoral districts as constituted under the Electoral Act 1993. Māori electoral districts extend to the 12-mile limit and are defined at meshblock level. The number of Māori electoral districts, and Māori electoral populations for each electorate, are calculated using formula in the Electoral Act 1993. The Representation Commission is convened by the Surveyor-General every five years following a Census of Population and Dwellings, and Māori Electoral Option. Its role is to re-draw electoral boundaries to make sure each electorate has about the same number of people. When setting the boundaries, the Representation Commission also considers existing boundaries, community of interest (including iwi affiliations), the infrastructure that links communities (such as main roads), topographical features, and any projected variation in the population of those districts during their existence. Māori Electoral District is a flat classification 7 categories These boundaries were used for the 2008 and 2011 New Zealand general elections.

This layer has been generalised, i.e. simplified for rapid drawing and is designed for thematic or web mapping purposes.

Layer ID 104066
Data type Vector multipolygon
Feature count 7
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Proposed Māori Electorates 2020

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

693
29
Updated
18 Nov 2019

This dataset was last updated on Stats NZ Geographic Data Service on 18 Nov 2019.

These boundaries comprise the proposed seven Māori electorates released by the Representation Commission in November 2019 for public consultation. Public objections to the proposed electorate boundaries can be made between 20 November and 20 December 2019. Following release of the objections, counter-objections can be made between 10 and 24 January 2020. Following consideration of objections and counter-objections, the boundaries for the 2020 and 2023 general elections will be fixed by the Representation Commission in April 2020.

The Representation Commission is convened by the Surveyor-General, its role is to re-draw electorate boundaries to make sure each electorate has about the same number of people. The Māori electoral population, number of Māori electorates and electoral quota are calculated using formula specified in the Electoral Act 1993. When setting the boundaries, the Representation Commission also considers existing boundaries, communities of interest (including iwi affiliations), the infrastructure that links communities (such as main roads), topographical features, and any projected variation in the population of those electorates during their existence. Land Information New Zealand (LINZ) and Stats NZ are the data custodians.

Data is provided with tohutō/macrons (UTF-8 format). To support users with the compatibility of the data and the applications they might be using, additional fields are also provided in ASCII format.

Meshblocks, which aggregate to form electorates, are updated annually by Stats NZ. Since the 2013/14 boundary review, a number of meshblock boundaries that coincide with electorate boundaries have been adjusted to a better position i.e. to follow the correct line of a river or road. These minor adjustments do not affect any populations. The adjustments are visible in a small number of land and coastal areas where the current and proposed boundaries do not exactly align. The Representation Commission will be asked to approve these minor adjustments when they fix the boundaries in 2020.

Layer ID 104208
Data type Vector multipolygon
Feature count 7
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)
Results 1 to 10 of 18