Statistical Area 1 2019 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5525
68
Updated
03 May 2019

This dataset was last updated on Stats NZ Geographic Data Service on 03 May 2019.

This dataset is the definitive set of annually released statistical area 1 (SA1) boundaries at 1 January 2019, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. SA1 is an output geography that allows the release of more detailed information about population characteristics than is available at the meshblock level. SA1s are defined at meshblock level.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2019 Statistical Area 1 attachment below.

Layer ID 98760
Data type Vector multipolygon
Feature count 29694
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 2019 (Centroid Inside)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5400
21
Updated
03 May 2019

This dataset was last updated on Stats NZ Geographic Data Service on 03 May 2019.

This dataset is the definitive set of statistical area 1 (SA1) inside centroid point layer for the major released version of the annually released statistical area 1 (SA1) boundaries as at 1 January 2019 as defined by Stats NZ.

The "inside" centroid is a point which always falls inside each SA1 polygon as this is often desirable in some users cases. The placement of the point is typically in the widest part of the polygon. The algorithms used are proprietary to ESRI and are related to label placement.

Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the Meshblock geometry. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 98764
Data type Vector point
Feature count 29879
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 2019 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5330
79
Updated
03 May 2019

This dataset was last updated on Stats NZ Geographic Data Service on 03 May 2019.

This dataset is the definitive set of statistical area 1 (SA1) boundaries at 1 January 2019 as defined by Stats NZ. SA1 is an output geography that allows for the release of more detailed information about population characteristics than is available at the meshblock level. SA1s are defined at meshblock level.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2019 Statistical Area 1 attachment below or link to the StatsNZ Classification System Aria.

Layer ID 98761
Data type Vector multipolygon
Feature count 29895 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 2020 (Centroid True)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4064
31
Added
19 Jan 2020

This dataset was first added to Stats NZ Geographic Data Service on 19 Jan 2020.

This dataset contains the true centroid point layer for the annually released statistical area 1 (SA1) boundaries as at 1 January 2020.The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the location of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the SA1 polygon, depending on the shape of the polygon.The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 104427
Data type Vector point
Feature count 29879
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

2018 Census Individual (part 3a) total New Zealand by Statistical Area 1

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3052
197
Added
18 May 2020

This dataset was first added to Stats NZ Geographic Data Service on 18 May 2020.

This individual (part 3a) dataset is displayed by statistical area 1 geography and contains information on:

• Work and labour force status

• Status in employment

• Occupation – major group, by usual residence address

• Occupation – major group, by workplace address*

• Industry (division), by usual residence address

• Industry (division), by workplace address*

* Workplace address is coded from information supplied by respondents about their workplaces. Where respondents do not supply sufficient information, their responses are coded to ‘not further defined’. The statistical area 1 dataset for 2018 Census excludes these ‘not further defined’ areas.

This dataset contains counts at statistical area 1 for selected variables from the 2018, 2013, and 2006 censuses. The geography corresponds to 2018 boundaries.

The data uses fixed random rounding to protect confidentiality. Some counts of less than 6 are suppressed according to 2018 confidentiality rules. Values of ‘-999’ indicate suppressed data.

For further information on this dataset please refer to the Statistical area 1 dataset for 2018 Census webpage - footnotes for individual part 3a, Excel workbooks, and CSV files are available to download. Data quality ratings for 2018 Census variables, summarising the quality rating and priority levels for 2018 Census variables, are available.

For information on the statistical area 1 geography please refer to the Statistical standard for geographic areas 2018.

Layer ID 104621
Data type Vector multipolygon
Feature count 29889 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

2018 Census individual part 3b total NZ by statistical area 1 (2018 Census only) lookup table

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2804
54
Added
07 Apr 2020

This dataset was first added to Stats NZ Geographic Data Service on 07 Apr 2020.

This lookup table refers to the web service 2018 Census individual part 3b data by SA1.
The web service contains data from the 2018 Census only, no data from previous censuses has been included.

The individual (part 3b) dataset is displayed by statistical area 1 geography and contains information on:
• Total hours worked in employment per week
• Main means of travel to work, by usual residence address
• Main means of travel to work, by workplace address*
• Unpaid activities

  • Workplace address is coded from information supplied by respondents about their workplaces. Where respondents do not supply sufficient information, their responses are coded to ‘not further defined’. The statistical area 1 dataset for 2018 Census excludes these ‘not further defined’ areas.

The data uses fixed random rounding to protect confidentiality. Some counts of less than 6 are suppressed according to 2018 confidentiality rules. Values of ‘-999’ indicate suppressed data, and values of ‘Null’ indicate data not collected.

For further information on this dataset please refer to the Statistical area 1 dataset for 2018 Census webpage - footnotes for individual part 3b, Excel workbooks, and CSV files are available to download. Data quality ratings for 2018 Census variables, summarising the quality rating and priority levels for 2018 Census variables, are available.

For information on the statistical area 1 geography please refer to the Statistical standard for geographic areas 2018.

Table ID 104573
Data type Table
Row count 81
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Urban Accessibility 2018 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2526
61
Added
27 Sep 2020

This dataset was first added to Stats NZ Geographic Data Service on 27 Sep 2020.

The urban accessibility (UA) classification measures the degree of urban influence New Zealand’s urban areas have on surrounding rural areas. It classifies the geographic accessibility of rural statistical area 1s (SA1s) and small urban areas according to their proximity, or degree of remoteness, to larger urban areas. This classification provides increased understanding of the heterogeneity of rural areas and small urban areas and will allow more extensive analysis and reporting. Understanding the degree of urban accessibility or remoteness is important as it has a major influence on the employment sector, accessibility to services, and population composition and change.
The methodology uses drive time from an SA1 address weighted centroid to the outside boundary of the nearest major, large, and medium urban area (from Stats NZ urban rural (UR) classification) to classify rural SA1s and small urban areas to one of five categories of accessibility or remoteness. The Open Source Routing Machine service using the OpenStreetMap road network is used to calculate the drive times.

A concordance between SA1 and Urban Accessibility can be found on Aria.

Rural SA1s and small urban areas are classified to the following categories:

·High urban accessibility:
0 to15 minutes from major urban areas

·Medium urban accessibility:
15 to 25 minutes from major urban areas
0 to 25 minutes from large urban areas
0 to 15 minutes from medium urban areas

·Low urban accessibility:
25 to 60 minutes from major or large urban areas
15 to 60 minutes from medium urban areas

·Remote:
60 to 120 minutes from major, large or medium urban areas

·Very remote:
more than 120 minutes from major, large or medium urban areas

For more information refer to: Urban accessibility - methodology and classification.

The full classification is shown below:
111 Major urban area

112 Large urban area

113 Medium urban area

221 High urban accessibility

222 Medium urban accessibility

223 Low urban accessibility

224 Remote

225 Very remote

331 Inland water

332 Inlet

333 Oceanic

Note: Areas of 221 High urban accessibility and 222 Medium urban accessibility may be regarded as peri-urban in nature and combined with urban areas for analytical purposes.

Layer ID 105022
Data type Vector multipolygon
Feature count 11
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

2018 Census individual part 2 total NZ by statistical area 1 (2018 Census only) look up table

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2092
79
Added
07 Apr 2020

This dataset was first added to Stats NZ Geographic Data Service on 07 Apr 2020.

This lookup table relates to the web service 2018 Census individual part 2 by SA1.
The web service contains data from the 2018 Census only, no data from previous censuses has been included.

The individual (part 2) dataset is displayed by statistical area 1 geography and contains information on:
• Religious affiliation (total responses)
• Cigarette smoking behaviour
• Difficulty seeing even if wearing glasses
• Difficulty hearing even if using a hearing aid
• Difficulty walking or climbing steps
• Difficulty remembering or concentrating
• Difficulty washing all over or dressing
• Difficulty communicating using your usual language for example being understood by others
• Legally registered relationship status
• Partnership status in current relationship
• Individual home ownership
• Number of children born
• Highest qualification
• Study participation
• Total personal income (grouped), including median total personal income
• Sources of personal income (total responses)
• Main means of travel to education, by usual residence address (2018 only)
• Main means of travel to education, by educational institution address (2018 only)

The data uses fixed random rounding to protect confidentiality. Some counts of less than 6 are suppressed according to 2018 confidentiality rules. Values of ‘-999’ indicate suppressed data, and values of ‘Null’ indicate data not collected.

For further information on this dataset please refer to the Statistical area 1 dataset for 2018 Census webpage - footnotes for individual part 2, Excel workbooks, and CSV files are available to download. Data quality ratings for 2018 Census variables, summarising the quality rating and priority levels for 2018 Census variables, are available.

For information on the statistical area 1 geography please refer to the Statistical standard for geographic areas 2018.

Table ID 104570
Data type Table
Row count 174
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

2018 Census individual part 3a total NZ by statistical area 1 (2018 Census only) lookup table

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1928
40
Added
07 Apr 2020

This dataset was first added to Stats NZ Geographic Data Service on 07 Apr 2020.

This lookup table refers to the web service 2018 Census individual part 3a data by SA1.
The web service contains data from the 2018 Census only, no data from previous censuses has been included.

The individual (part 3a) dataset is displayed by statistical area 1 geography and contains information on:
• Work and labour force status
• Status in employment
• Occupation – major group, by usual residence address
• Occupation – major group, by workplace address (1)
• Industry (division), by usual residence address
• Industry (division), by workplace address (1)

(1) Workplace address is coded from information supplied by respondents about their workplaces. Where respondents do not supply sufficient information, their responses are coded to ‘not further defined’. The statistical area 1 dataset for 2018 Census excludes these ‘not further defined’ areas.

The data uses fixed random rounding to protect confidentiality. Some counts of less than 6 are suppressed according to 2018 confidentiality rules. Values of ‘-999’ indicate suppressed data, and values of ‘Null’ indicate data not collected.

For further information on this dataset please refer to the Statistical area 1 dataset for 2018 Census webpage - footnotes for individual part 3a, Excel workbooks, and CSV files are available to download. Data quality ratings for 2018 Census variables, summarising the quality rating and priority levels for 2018 Census variables, are available.

For information on the statistical area 1 geography please refer to the Statistical standard for geographic areas 2018.

Table ID 104572
Data type Table
Row count 85
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

2018 Census Household total New Zealand by Statistical Area 1

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1337
243
Updated
21 May 2020

This dataset was last updated on Stats NZ Geographic Data Service on 21 May 2020.

This household dataset is displayed by statistical area 1 geography and contains information on:

• Total households

• Tenure of household

• Sector of landlord

• Weekly rent paid by household, including median weekly rent paid by household

• Number of motor vehicles

• Access to telecommunication systems (total responses)

This dataset contains counts at statistical area 1 for selected variables from the 2018, 2013, and 2006 censuses. The geography corresponds to 2018 boundaries.

The data uses fixed random rounding to protect confidentiality. Some counts of less than 6 are suppressed according to 2018 confidentiality rules. Values of ‘-999’ indicate suppressed data, and values of ‘-997’ indicate data not collected.

For further information on this dataset please refer to the Statistical area 1 dataset for 2018 Census webpage - footnotes for household, Excel workbooks, and CSV files are available to download. Data quality ratings for 2018 Census variables, summarising the quality rating and priority levels for 2018 Census variables, are available.

For information on the statistical area 1 geography please refer to the Statistical standard for geographic areas 2018.

Layer ID 104611
Data type Vector multipolygon
Feature count 29889 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 11 to 20 of 31