Regional Council 2013

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8022
231
Added
20 Oct 2016

This dataset was first added to Stats NZ Geographic Data Service on 20 Oct 2016.

This is the definitive set of regional council boundaries for 2013 as defined by the Local Government Commission and/or regional councils themselves but maintained by Statistics New Zealand (the custodian) as at 1 January 2013.
The regional council is the top tier of local government in New Zealand. There are 16 regional councils in New Zealand (defined by Part 1 of Schedule 2 of the Local Government Act 2002). Eleven are governed by an elected regional council, while five are governed by territorial authorities (the second tier of local government) who also perform the functions of a regional council and are known as unitary authorities. These unitary authorities are Auckland Council, Nelson City Council, and Gisborne, Tasman, and Marlborough District Councils. The Chatham Islands Council also performs some of the functions of a regional council, but is not strictly a unitary authority. Unitary authorities act as regional councils for the purposes of a wide range of legislative purposes. Regional councils are responsible for the administration of many environmental and transport matters such as land transport planning and harbour navigation and safety.
Regional Councils were established in 1989 after the abolition of the 22 local government regions. The Local Government Act 2002 requires the boundaries of regions to conform, as far as possible, to one or more water catchments. When determining regional boundaries, the Local Government Commission gave consideration to regional communities of interest when selecting which water catchments to include in a region. It also considered factors such as natural resource management, land use planning and environmental matters. Some regional council boundaries are coterminous with territorial authority boundaries but there are several exceptions. An example is Taupo District, which is geographically split between four regions, although most of its area falls within the Waikato Region. Where territorial local authorities straddle regional council boundaries, the affected area is statistically defined by complete area units. In general, however, regional councils contain complete territorial authorities.
The unitary authority of the Auckland Council was formed in 2010, under the Local Government (Tamaki Makarau Reorganisation) Act 2009, replacing the Auckland Regional Council and seven territorial authorities. The seaward boundary of any coastal regional council is the twelve mile New Zealand territorial limit.

Layer ID 25738
Data type Vector multipolygon
Feature count 17
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2018 (Centroid Inside)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8293
218
Updated
17 May 2018

This dataset was last updated on Stats NZ Geographic Data Service on 17 May 2018.

Statistical Area 2 2018 (Centroid Inside) is the inside centroid point layer for the major released version of the annually released statistical area 2 (SA2) boundaries for 2018.
The "inside" centroid is a point which always falls inside each SA2 polygon as this is often desirable in some users cases. The placement of the point is typically in the widest part of the polygon. The algorithms used are proprietary to ESRI and are related to label placement. Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the Meshblock geometry. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

Layer ID 93619
Data type Vector point
Feature count 2237
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Ward 2018 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8700
213
Added
03 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.

This dataset is the definitive set of ward boundaries 1 January 2018 as defined by the territorial authorities and/or Local Government Commission, and maintained by Stats NZ.Wards are defined under the Local Electoral Act 2001 and result from dividing a territorial authority for electoral purposes. Wards are defined at meshblock level.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Ward attachment below.

Layer ID 92221
Data type Vector multipolygon
Feature count 245
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

2013 Census counts by Statistical Area 2 2018

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7585
203
Updated
22 May 2018

This dataset was last updated on Stats NZ Geographic Data Service on 22 May 2018.

The 2013 Census usually resident population count, household, and occupied dwellings (private and non-private) data has been rebased to the 2018 meshblock geography and is shown according to the new statistical geographies and urban rural classification developed as a result of the Statistical Standard for Geographic Areas 2018 (SSGA18) review. The data is experimental and is provided as a guide to understanding the impact of the new geographic boundaries on the previous census counts.
Note: This data has been randomly rounded to protect confidentiality. Individual figures may not add up to totals, and values for the same data may vary in different tables.
For further information see the attachments below: Information about data; 2013 Census counts on SA22018 lookup; and ANZLIC Metadata 2018 Statistical Area 2.
For 2013 Census usually resident population counts by statistical area 2 2018 and area unit 2013 see attachment: Census 2013 population counts by SA22018 and AU2013.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

Layer ID 92226
Data type Vector multipolygon
Feature count 2253 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Regional Tourism Organisation Areas 2020 Clipped

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

154
1
Added
31 Aug 2020

This dataset was first added to Stats NZ Geographic Data Service on 31 Aug 2020.

Regional tourism organisation boundaries are meshblock based and were created by dissolving groupings of ward and territorial authority areas. This version of regional tourism organisation boundaries is clipped to the coastline and excludes those meshblocks that had a land/water attribute of Inlet or Oceanic. Regional tourism organisations are responsible for the promotion of their regions to prospective domestic and international visitors. This version has been developed with input from Regional Tourism New Zealand.

Note: Not all 37 categories representing regional tourism organisation areas are currently operating as regional tourism organisations at the time of publishing. Those areas not operating as regional tourism organisations are: Kawerau (06), Rangitikei (14), Tararua (16), Horowhenua (18) and Waimate (28).

Fiordland includes Fiordland National Park, Manapouri, Te Anau, and Te Anau Downs areas with the rest of the area assigned to Southland. Where a regional tourism organisation area boundary crossed a meshblock the meshblock was assigned to whichever regional tourism organisation area the majority of the meshblock fell within. The meshblocks crossed by regional tourism organisation areas boundaries are: 3174500 Fiordland 3175100 Fiordland 3173403 Southland 3172802 Southland 3172804 Southland 3172100 Fiordland 4004893 Fiordland 3191600 Fiordland 3191701 Fiordland 3192300 Southland 3192400 Southland 3193400 Fiordland.

The classification relating to this version can be viewed and downloaded from the Stats NZ classifications management system Ariā: Regional Tourism Organisation Areas V3.0.0.

Layer ID 104934
Data type Vector multipolygon
Feature count 37
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2019 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7841
289
Updated
03 May 2019

This dataset was last updated on Stats NZ Geographic Data Service on 03 May 2019.

This dataset is the definitive set of statistical area 2 (SA2) boundaries at 1 January 2019 as defined by Stats NZ. SA2 is a new output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. SA2s are defined at SA1 and meshblock levels.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2019 Statistical Area 2 attachment below or link to the StatsNZ Classification System Aria.

Layer ID 98970
Data type Vector multipolygon
Feature count 2255 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2018 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7131
329
Updated
17 May 2018

This dataset was last updated on Stats NZ Geographic Data Service on 17 May 2018.

This dataset is the definitive set of statistical area 2 (SA2) boundaries at 1 January 2018, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. SA2 is a new output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. SA2s are defined at meshblock and SA1 levels.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Statistical Area 2 attachment below.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

Layer ID 92213
Data type Vector multipolygon
Feature count 2171
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 2020 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

329
43
Updated
02 Feb 2020

This dataset was last updated on Stats NZ Geographic Data Service on 02 Feb 2020.

This dataset contains the annually released meshblock boundaries for 2020, as defined by Stats NZ, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 52,929 meshblocks.

Stats NZ maintains an annual meshblock geography for collecting and producing statistical data. This allows data to be compared over time. A meshblock is the smallest geographic unit for which statistical data is collected and processed by Stats NZ. A meshblock is defined by a geographic area, which can vary in size from part of a city block to a large area of rural land. Each meshblock borders on another to form a network covering all of New Zealand, including coasts and inlets and extending out to the 200-mile economic zone. Meshblocks are added together to build up larger geographic areas such as statistical area 1 (SA1), statistical area 2 (SA2), and urban rural. They are also used to define electoral districts, territorial authorities, and regional councils.

The following 16 meshblocks are outside the 12 mile limit and are not held in digitised form: 0016901, 0016902, 1588000, 3166401, 3166402, 3166600, 3166710, 3166711, 3195000, 3196001, 3196002, 3196003, 3196004, 3196005, 3196006, 3196007.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

The meshblock classification can also be downloaded from the Stats NZ classification and concordance tool Ariā.

Layer ID 104279
Data type Vector multipolygon
Feature count 52929
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Territorial Authority 2018 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7482
345
Added
03 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.

This dataset is the definitive set of annually released territorial authority boundaries at 1 January 2018, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. A territorial authority is defined under the Local Government Act 2002 as a city or a district council. Territorial authorities are the second tier of local government in New Zealand, below regional councils.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Territorial Authority attachment below.

Layer ID 92215
Data type Vector multipolygon
Feature count 68
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Regional Tourism Organisation 2017

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1198
17
Updated
16 Oct 2019

This dataset was last updated on Stats NZ Geographic Data Service on 16 Oct 2019.

Regional tourism organisation boundaries are meshblock based and were created by dissolving groupings of ward and territorial authority areas. This version or regional tourism organisation boundaries extends to the 12 mile limit. Regional tourism organisations are responsible for the promotion of their regions to potential domestic and international visitors. This version has been developed with input from Regional Tourism New Zealand

Note: Not all 37 categories representing regional tourism organisation areas are currently operating as regional tourism organisations at the time of publishing. Those areas not operating as regional tourism organisations are: Kawerau (06), Rangitikei (14), Tararua (16), Horowhenua (18) and Waimate (28).

Fiordland includes Fiordland National Park, Manapouri, Te Anau, and Te Anau Downs areas with the rest of the area assigned to Southland. Where a regional tourism organisation area boundary crossed a meshblock the meshblock was assigned to whichever regional tourism organisation area the majority of the meshblock fell within. The meshblocks crossed by regional tourism organisation areas boundries are: 3174500 Fiordland 3175100 Fiordland 3173403 Southland 3172802 Southland 3172804 Southland 3172100 Fiordland 4004893 Fiordland 3191600 Fiordland 3191701 Fiordland 3192300 Southland 3192400 Southland 3193400 Fiordland.

The classification relating to this version can be viewed and downloaded from the Stats NZ classifications management system ARIA : Regional Tourism Organisation Areas V3.0.0

Layer ID 103794
Data type Vector multipolygon
Feature count 37
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 41 to 50 of 407