urban_accessibility_indicator_2022_csv

158
24
Updated
01 Dec 2021

This item was last updated on Stats NZ Geographic Data Service on 01 Dec 2021

This a CSV version of the Urban Accessibility Indicator 2022 (generalised) layer.

Document ID23492
File nameurban_accessibility_indicator_2022_csv.csv
TypeCSV
Size849 B

Urban Accessibility Indicator 2022 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1447
13
Added
01 Dec 2021

This dataset was first added to Stats NZ Geographic Data Service on 01 Dec 2021.

The urban accessibility (UA) classification measures the degree of urban influence New Zealand’s urban areas have on surrounding rural areas. It classifies the geographic accessibility of rural statistical area 1s (SA1s) and small urban areas according to their proximity, or degree of remoteness, to larger urban areas. This classification provides increased understanding of the heterogeneity of rural areas and small urban areas and will allow more extensive analysis and reporting. Understanding the degree of urban accessibility or remoteness is important as it has a major influence on the employment sector, accessibility to services, and population composition and change.

The methodology uses drive time from an SA1 address weighted centroid to the outside boundary of the nearest major, large, and medium urban area (from Stats NZ urban rural (UR) classification) to classify rural SA1s and small urban areas to one of five categories of accessibility or remoteness. The Open Source Routing Machine service using the OpenStreetMap road network is used to calculate the drive times.

A concordance between SA1 and Urban Accessibility can be found on Aria.

Urban accessibility indicator is also available as an attribute on Statistical Area 1 Higher Geographies 2022 (generalised).

Rural SA1s and small urban areas are classified to the following categories:

·High urban accessibility:
0 to15 minutes from major urban areas

·Medium urban accessibility:
15 to 25 minutes from major urban areas
0 to 25 minutes from large urban areas
0 to 15 minutes from medium urban areas

·Low urban accessibility:
25 to 60 minutes from major or large urban areas
15 to 60 minutes from medium urban areas

·Remote:
60 to 120 minutes from major, large or medium urban areas

·Very remote:
more than 120 minutes from major, large or medium urban areas

For more information refer to: Urban accessibility - methodology and classification.

The full classification is shown below:

111 Major urban area

112 Large urban area

113 Medium urban area

221 High urban accessibility

222 Medium urban accessibility

223 Low urban accessibility

224 Remote

225 Very remote

331 Inland water

332 Inlet

333 Oceanic

Areas of 221 High urban accessibility and 222 Medium urban accessibility may be regarded as peri-urban in nature and combined with urban areas for analytical purposes.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 106701
Data type Vector multipolygon
Feature count 11
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

maori_ward_2022_clipped_csv

126
19
Updated
01 Dec 2021

This item was last updated on Stats NZ Geographic Data Service on 01 Dec 2021

This is a CSV version of the Māori Ward 2022 Clipped (generalised) layer.

Document ID23491
File namemaori_ward_2022_clipped_csv.csv
TypeCSV
Size7.3 KB

Māori Ward 2022 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1174
8
Added
01 Dec 2021

This dataset was first added to Stats NZ Geographic Data Service on 01 Dec 2021.

This dataset is the definitive set of of annually released Māori ward boundaries for 2022 as defined by the territorial authorities and/or Local Government Commission but maintained by Stats NZ (the custodian). This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 1 Māori ward, excluding area outside Māori ward and a total of 68 features.

The Local Electoral Act 2001 provides that Māori wards may be established in territorial authorities. The statutory provisions for establishing Māori wards are set out in sections 19Z to 19ZH of the Local Electoral Act 2001. The first Māori ward was established by representation review in 2019 and appears in the 2020 geographic boundaries released by Stats NZ. The first Māori ward to be created is Wairoa Māori ward (02901) in the Wairoa District. Māori ward boundaries are defined at meshblock level.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007

Layer ID 106700
Data type Vector multipolygon
Feature count 68
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

maori_ward_2022_csv

132
18
Updated
01 Dec 2021

This item was last updated on Stats NZ Geographic Data Service on 01 Dec 2021

This is a CSV version of the Māori Ward 2022 (generalised) layer

Document ID23490
File namemaori_ward_2022_csv.csv
TypeCSV
Size7.3 KB

Māori Ward 2022 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1222
10
Added
01 Dec 2021

This dataset was first added to Stats NZ Geographic Data Service on 01 Dec 2021.

This dataset is the definitive set of of annually released Māori ward boundaries for 2022 as defined by the territorial authorities and/or Local Government Commission but maintained by Stats NZ (the custodian). This version contains 1 Māori ward, excluding area outside Māori ward and a total of 68 features.

The Local Electoral Act 2001 provides that Māori wards may be established in territorial authorities. The statutory provisions for establishing Māori wards are set out in sections 19Z to 19ZH of the Local Electoral Act 2001. The first Māori ward was established by representation review in 2019 and appears in the 2020 geographic boundaries released by Stats NZ. The first Māori ward to be created is Wairoa Māori ward (02901) in the Wairoa District. Māori ward boundaries are defined at meshblock level.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007

Layer ID 106699
Data type Vector multipolygon
Feature count 68
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

ward_2022_clipped_csv

131
19
Updated
01 Dec 2021

This item was last updated on Stats NZ Geographic Data Service on 01 Dec 2021

This is a CSV version of the Ward 2022 Clipped (generalised) layer.

Document ID23489
File nameward_2022_clipped_csv.csv
TypeCSV
Size22.1 KB

Ward 2022 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1290
22
Added
01 Dec 2021

This dataset was first added to Stats NZ Geographic Data Service on 01 Dec 2021.

This dataset is the definitive set of annually released ward boundaries for 2022 as defined by the territorial authorities and/or Local Government Commission, and maintained by Stats NZ (the custodian), clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 226 wards, excluding area outside ward and a total of 239 features.

Wards were originally set up within any territorial authority with a population of at least 20,000. Wards are defined under the Local Electoral Act 2001 and result from dividing a territorial authority for electoral purposes. The ward system was designed to allow for the recognition of communities within a territorial authority and to increase community involvement in the local government system. Territorial authorities can now choose whether they would like to maintain electoral wards. As a result, the number of wards has steadily decreased since they were first created in 1989. Ward boundaries are reviewed in the year before the three-yearly local government elections.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 106698
Data type Vector multipolygon
Feature count 239
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

ward_2022_csv

135
26
Updated
01 Dec 2021

This item was last updated on Stats NZ Geographic Data Service on 01 Dec 2021

This is a CSV version of the Ward 2022 (generalised) layer.

Document ID23488
File nameward_2022_csv.csv
TypeCSV
Size22.1 KB

Ward 2022 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1643
71
Added
01 Dec 2021

This dataset was first added to Stats NZ Geographic Data Service on 01 Dec 2021.

This dataset is the definitive set of annually released ward boundaries for 2022 as defined by the territorial authorities and/or Local Government Commission, and maintained by Stats NZ (the custodian). This version contains 226 wards, excluding area outside ward and a total of 239 features.

Wards were originally set up within any territorial authority with a population of at least 20,000. Wards are defined under the Local Electoral Act 2001 and result from dividing a territorial authority for electoral purposes. The ward system was designed to allow for the recognition of communities within a territorial authority and to increase community involvement in the local government system. Territorial authorities can now choose whether they would like to maintain electoral wards. As a result, the number of wards has steadily decreased since they were first created in 1989. Ward boundaries are reviewed in the year before the three-yearly local government elections.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 106697
Data type Vector multipolygon
Feature count 239
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 41 to 50 of 675