Data - Page 7

The 2013 Census usually resident population count, household, and occupied dwellings (private and non-private) data has been rebased to the 2018 meshblock geography and is shown according to the new statistical geographies and urban rural classification developed as a result of the Statistical Standard for Geographic Areas 2018 (SSGA18) review. The data is experimental and is provided as a guide to understanding the impact of the new geographic boundaries on the previous census counts.

Note: This data has been randomly rounded to protect confidentiality. Individual figures may not add up to totals, and values for the same data may vary in different tables

For further information see the attachments below: Information about data; 2013 Census counts on UR2018 lookup; and ANZLIC 2018 Metadata Urban Rural.

Statistical Area 2 2018 (Centroid Inside) is the inside centroid point layer for the major released version of the annually released statistical area 2 (SA2) boundaries for 2018.
The "inside" centroid is a point which always falls inside each SA2 polygon as this is often desirable in some users cases. The placement of the point is typically in the widest part of the polygon. The algorithms used are proprietary to ESRI and are related to label placement. Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the Meshblock geometry. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

This dataset is the definitive set of statistical area 2 (SA2) boundaries for 2022 as defined by Stats NZ (the custodian). This version contains 2,260 SA2 features.

SA2s were introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA2018) which replaced the New Zealand Standard Areas Classification (NZSAC1992). The SA2 geography replaces the (NZSAC1992) area unit geography.

SA2 is an output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. The SA2 geography aims to reflect communities that interact together socially and economically. In populated areas, SA2s generally contain similar sized populations.

SA2s are built from SA1s and either define or aggregate to define urban rural areas, territorial authorities, and regional councils. SA2s in city council areas generally have a population of 2,000–4,000 residents while SA2s in district council areas generally have a population of 1,000–3,000 residents. In rural areas, many SA2s have fewer than 1,000 residents because they are in conservation areas or contain sparse populations that cover a large area.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

The 2013 Census usually resident population count, household, and occupied dwellings (private and non-private) data has been rebased to the 2018 meshblock geography and is shown according to the new statistical geographies and urban rural classification developed as a result of the Statistical Standard for Geographic Areas 2018 (SSGA18) review. The data is experimental and is provided as a guide to understanding the impact of the new geographic boundaries on the previous census counts.

Note: This data has been randomly rounded to protect confidentiality. Individual figures may not add up to totals, and values for the same data may vary in different tables

For further information see the attachments below: Information about data; 2013 Census counts on SA12018 lookup; and ANZLIC Metadata 2018 Statistical Area 1.

This dataset is the definitive set of annually released meshblock boundaries for 2021 as defined by Stats NZ. This version contains 53,598 meshblocks.

Stats NZ maintains an annual meshblock geography for collecting and producing statistical data. This allows data to be compared over time. A meshblock is the smallest geographic unit for which statistical data is collected and processed by Stats NZ. A meshblock is defined by a geographic area, which can vary in size from part of a city block to a large area of rural land. Each meshblock borders on another to form a network covering all of New Zealand, including coasts and inlets and extending out to the 200-mile economic zone. Meshblocks are added together to build up larger geographic areas such as statistical area 1 (SA1), statistical area 2 (SA2), and urban rural. They are also used to define electoral districts, territorial authorities, and regional councils.

The following 16 meshblocks are outside the 12 mile limit and are not held in digitised form: 0016901, 0016902, 1588000, 3166401, 3166402, 3166600, 3166710, 3166711, 3195000, 3196001, 3196002, 3196003, 3196004, 3196005, 3196006, 3196007.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

The meshblock classification can also be downloaded from the Stats NZ classification and concordance tool Ariā.

2013 Census meshblock dataset contains counts at meshblock levels for selected variables from the 2013 Census. The geographies correspond to 2013 Census boundaries. The counts are at the highest level of each variable’s classification.

Notes:
Confidentiality rules have been applied to all cells in this table, including randomly rounding to base 3.
-999 indicates cells have been suppressed for confidentiality reasons.
-995 indicates cells that could not be calculated.

This dataset is a high definition (HD) version of the annually released meshblock boundaries at 1 January 2018. This HD version is the most detailed geometry, suitable for use in GIS for geometric analysis operations and for the computation of areas, centroids and other metrics. The HD version is aligned to the LINZ cadastre. Stats NZ maintains an annual meshblock geography for collecting and producing statistical data. This allows data to be compared over time. A meshblock is the smallest geographic unit for which statistical data is collected and processed by Stats NZ. A meshblock is defined by a geographic area, which can vary in size from part of a city block to a large area of rural land. Each meshblock borders on another to form a network covering all of New Zealand, including coasts and inlets and extending out to the 200-mile economic zone. Meshblocks are added together to build up larger geographic areas such as statistical area 1 (SA1), statistical area 2 (SA2), and urban rural. They are also used to define electoral districts, territorial authorities, and regional councils. The digital geographic boundaries are defined and maintained by Stats NZ. Meshblocks cover the land area of New Zealand, the water area to the 12-mile limit, the Chatham Islands, Kermadec Islands, sub-Antarctic islands, off-shore oil rigs, and Ross Dependency.

Digital boundary data became freely available on 1 July 2007.

There are 16 meshblocks not held in digitised form.

For further information see ANZLIC Metadata 2018 Meshblock attachment below.

This dataset is the definitive set of annually released territorial authority boundaries for 2022 as defined the territorial authorities and/or Local Government Commission and maintained by Stats NZ (the custodian). This version contains 68 features.

A territorial authority is defined under the Local Government Act 2002 as a city or a district council. There are 67 territorial authorities in New Zealand. Territorial authorities are the second tier of local government in New Zealand, below regional councils. The 67 territorial authorities comprise 13 city councils including the Auckland council, 53 district councils, and the Chatham Islands Territory.

Territorial authorities are defined at meshblock level. Statistical area 1 and statistical area 2 geographies nest within territorial authority boundaries

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ASCII’. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes. Digital boundary data became freely available on 1 July 2007.

This dataset is the definitive set of meshblock boundaries for 2017 as defined by Statistics New Zealand.

Statistics New Zealand maintains an annual meshblock pattern for collecting and producing statistical data. This allows data to be compared over time. A meshblock is the smallest geographic unit for which statistical data is collected and processed by Statistics New Zealand. A meshblock is defined by a geographic area, which can vary in size from part of a city block to a large area of rural land. Each meshblock borders on another to form a network covering all of New Zealand, including coasts and inlets and extending out to the 200-mile economic zone. Meshblocks are added together to build up larger geographic areas such as area units and urban areas. They are also used to define electoral districts, territorial authorities, and regional councils.

This dataset is the definitive set of annually released territorial authority boundaries at 1 January 2019 as defined by the territorial authorities and/or Local Government Commission, and maintained by Stats NZ. A territorial authority is defined under the Local Government Act 2002 as a city or a district council. Territorial authorities are the second tier of local government in New Zealand, below regional councils.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2019 Territorial Authority attachment below.