Māori Ward 2020 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1723
20
Updated
30 Jan 2020

This dataset was last updated on Stats NZ Geographic Data Service on 30 Jan 2020.

This dataset is the definitive set of Māori ward boundaries for 2020 as defined by the territorial authorities and/or Local Government Commission but maintained by Stats NZ (the custodian). This version contains 68 categories.

The Local Electoral Act 2001 provides that Māori wards may be established in territorial authorities. The statutory provisions for establishing Māori wards are set out in sections 19Z to 19ZH of the Local Electoral Act 2001. The first Māori ward was established by representation review in 2019 and appears in the 2020 geographic boundaries released by Stats NZ. The first Māori ward to be created is Wairoa Māori ward (02901) in the Wairoa District. Māori ward boundaries are defined at meshblock level.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104265
Data type Vector multipolygon
Feature count 68
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Constituency 2020 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3676
28
Updated
29 Jan 2020

This dataset was last updated on Stats NZ Geographic Data Service on 29 Jan 2020.

This dataset contains the annually released regional council constituency boundaries for 2020, as defined by the regional councils and/or Local Government Commission and maintained by Stats NZ (the custodian). clipped to the coastline.This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries.This version contains 64 categories.

Constituencies are established under the Local Electoral Act 2001 and result from the division of a region for electoral purposes.If a regional council decides to have a Māori constituency, the constituencies within the council are known as general constituencies and Māori constituencies.Constituencies are divisions of regional council areas. They are defined at meshblock level, and do not coincide with the statistical area 1 (SA1) geography or the statistical area 2 (SA2) geography. They are created, based on population, to be the voting areas within councils. Constituencies are required to reflect communities of interest. Their boundaries, so far as is practicable, coincide with those of territorial authorities or wards.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104246
Data type Vector multipolygon
Feature count 64
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Territorial Authority Local Board 2020 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4018
86
Updated
31 Jan 2020

This dataset was last updated on Stats NZ Geographic Data Service on 31 Jan 2020.

This dataset is a derived version comprising local boards for Auckland and territorial authorities for the rest of New Zealand, as defined by the territorial authorities and/or Local Government Commission and maintained by Stats NZ(the custodian), clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 21 local boards in the Auckland Council and 66 territorial authority boundaries for the rest New Zealand.

For statistical outputs that use territorial authorities to aggregate and report data Auckland Council is treated as a single geographic entity. This can hide meaningful patterns and trends for a significant portion of the population. A solution was to create a new classification of territorial authorities that includes the local boards for Auckland. The Auckland Council was established in 2010 under the Local Government (Tamaki Makaurau Reorganisation) Act 2009. Seven territorial authorities within the Auckland Region were abolished and replaced by the unitary authority Auckland Council. Local boards fall within the community board classification.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104255
Data type Vector multipolygon
Feature count 88
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Subdivision 2020 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1612
29
Updated
31 Jan 2020

This dataset was last updated on Stats NZ Geographic Data Service on 31 Jan 2020.

This dataset contains the annually released territorial authority subdivision boundaries for 2020, as defined by the territorial authorities and/or Local Government Commission and maintained by Stats NZ (the custodian), clipped to the coastline.This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 145 categories.

Subdivisions are set up under the Local Government Act 2002 and Local Electoral Act 2001. A subdivision is a division of a community or local board area for electoral purposes. Subdivisions are defined at meshblock level, and do not coincide with the statistical area 1 (SA1) geography or the statistical area 2 (SA2) geography. A number of territorial authorities do not have subdivisions, and if they do, the subdivisions do not necessarily cover the whole territorial authority area. Subdivisions nest within community or local boards. Where a community or local board is divided into subdivisions all of the community or local board area must be included in a subdivision.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104257
Data type Vector multipolygon
Feature count 145
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 2020 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1836
91
Updated
30 Jan 2020

This dataset was last updated on Stats NZ Geographic Data Service on 30 Jan 2020.

This dataset contains the annually released statistical area 1 (SA1) boundaries for 2020, as defined by Stats NZ, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 29,694 SA1 categories.

SA1s were introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaced the New Zealand Standard Areas Classification (NZSAC92). SA1 is a new output geography that allows the release of more detailed information about population characteristics than is available at the meshblock level.

Built by joining meshblocks, SA1s have an ideal size range of 100–200 residents, and a maximum population of about 500. This is to minimise suppression of population data in multivariate statistics tables. SA1s either define or aggregate to define SA2s, urban rural areas, territorial authorities, and regional councils. Some SA1s that contain apartment blocks, retirement villages, and large non-residential facilities have more than 500 residents.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

The SA1 classification can also be downloaded from the Stats NZ classification and concordance tool Ariā.

Layer ID 104272
Data type Vector multipolygon
Feature count 29694
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 2020 (Centroid True)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2726
46
Added
20 Jan 2020

This dataset was first added to Stats NZ Geographic Data Service on 20 Jan 2020.

This dataset contains the true centroid point layer for the annually released meshblock boundaries as at 1 January 2020.The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the locations of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the meshblock polygon, depending on the shape of the polygon. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.Non-digitised meshblocks cannot have a centroid.

Layer ID 104429
Data type Vector point
Feature count 53580
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2020 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4409
178
Updated
28 Jun 2020

This dataset was last updated on Stats NZ Geographic Data Service on 28 Jun 2020.

This dataset contains the annually released statistical area 2 (SA2) boundaries for 2020 as defined by Stats NZ, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 2,173 SA2 categories.

SA2s were introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA2018) which replaced he New Zealand Standard Areas Classification (NZSAC1992). The SA2 geography replaces the (NZSAC1992) area unit geography. This version contains 2,173 SA2s.

SA2 is an output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. The SA2 geography aims to reflect communities that interact together socially and economically. In populated areas, SA2s generally contain similar sized populations.

SA2s are built from SA1s and either define or aggregate to define urban rural areas, territorial authorities, and regional councils. SA2s in city council areas generally have a population of 2,000–4,000 residents while SA2s in district council areas generally have a population of 1,000–3,000 residents. In rural areas, many SA2s have fewer than 1,000 residents because they are in conservation areas or contain sparse populations that cover a large area.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104270
Data type Vector multipolygon
Feature count 2173
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Subdivision 2020 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5063
38
Updated
02 Feb 2020

This dataset was last updated on Stats NZ Geographic Data Service on 02 Feb 2020.

This dataset is the definitive set of annually released (territorial authority) subdivision boundaries for 2020, as defined by the territorial authorities and/or Local Government Commission and maintained by Stats NZ (the custodian). This version contains 145 categories.

Subdivisions are set up under the Local Government Act 2002 and Local Electoral Act 2001. A subdivision is a division of a community or local board area for electoral purposes. Subdivisions are defined at meshblock level, and do not coincide with the statistical area 1 (SA1) geography or the statistical area 2 (SA2) geography. A number of territorial authorities do not have subdivisions, and if they do, the subdivisions do not necessarily cover the whole territorial authority area. Subdivisions nest within community or local boards. Where a community or local board is divided into subdivisions all of the community or local board area must be included in a subdivision.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104259
Data type Vector multipolygon
Feature count 145
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 Higher Geographies 2020 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1960
67
Updated
30 Jan 2020

This dataset was last updated on Stats NZ Geographic Data Service on 30 Jan 2020.

This dataset is the definitive set of annually released statistical area 1 (SA1) boundaries concorded to higher geographies for 2020 as defined by Stats NZ. This version contains 29,895 SA1s including 16 with empty or null geometries (non-digitised SA1s).

This SA1 higher geographies 2020 file is a correspondence, or concordance, which relates SA1s to larger geographic areas or 'higher geographies'. The higher geographies contained in this concordance are: regional council (REGC2020), statistical area 2 (SA22020), territorial authority (TA2020), urban rural (UR2020), and urban rural indicator (IUR2020). The following geographies were introduced in 2018: statistical area 1 (SA1), statistical area 2 (SA2), urban rural (UR), and urban rural indicator (IUR) as part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaced the 1992 New Zealand Standard Areas Classification (NZSAC92).

Higher geography names are provided with and without tohutō/macrons, as applicable. Column names for those without macrons are suffixed ‘ascii’. For further information on individual higher geographies, refer to each geography’s metadata.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104276
Data type Vector multipolygon
Feature count 29895 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Ward 2020 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4587
91
Updated
22 Sep 2020

This dataset was last updated on Stats NZ Geographic Data Service on 22 Sep 2020.

This dataset contains the annually released ward boundaries for 2020 as defined by the territorial authorities and/or Local Government Commission, and maintained by Stats NZ (the custodian), clipped to the coastline.This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 239 categories.

Wards were originally set up within any territorial authority with a population of at least 20,000. Wards are defined under the Local Electoral Act 2001 and result from dividing a territorial authority for electoral purposes. The ward system was designed to allow for the recognition of communities within a territorial authority and to increase community involvement in the local government system.Territorial authorities can now choose whether they would like to maintain electoral wards. As a result, the number of wards has steadily decreased since they were first created in 1989. Ward boundaries are reviewed in the year before the three-yearly local government elections.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104262
Data type Vector multipolygon
Feature count 239
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 21 to 30 of 37