Subdivision 2021 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1505
21
Added
01 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 01 Dec 2020.

This dataset is the definitive set of annually released (territorial authority) subdivision boundaries for 2021, as defined by the territorial authorities and/or Local Government Commission and maintained by Stats NZ (the custodian). This version contains 145 categories.

Subdivisions are set up under the Local Government Act 2002 and Local Electoral Act 2001. A subdivision is a division of a community or local board area for electoral purposes. Subdivisions are defined at meshblock level, and do not coincide with the statistical area 1 (SA1) geography or the statistical area 2 (SA2) geography. A number of territorial authorities do not have subdivisions, and if they do, the subdivisions do not necessarily cover the whole territorial authority area. Subdivisions nest within community or local boards. Where a community or local board is divided into subdivisions all of the community or local board area must be included in a subdivision.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105137
Data type Vector multipolygon
Feature count 145
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2021 (Centroid Inside)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1774
20
Updated
13 Jan 2021

This dataset was last updated on Stats NZ Geographic Data Service on 13 Jan 2021.

This dataset contains the inside centroid point layer for the annually released statistical area 2 (SA2) boundaries as at 1 January 2021. The "inside" centroid is a point which always falls inside each SA2 polygon as this is often desirable. The placement of the point is typically in the widest part of the polygon.

The algorithms used are proprietary to ESRI and are related to label placement. Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the SA2 geometry.

The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 105168
Data type Vector point
Feature count 2243
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Māori Constituency 2021 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1401
15
Added
04 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 04 Dec 2020.

This dataset is the definitive set of annually released regional council Māori constituency boundaries for 2021 as defined by the regional councils and/or Local Government Commission, and maintained by Stats NZ (the custodian). This version contains 20 categories.

This version contains 5 Māori constituencies, excluding area outside constituency. Māori constituencies are established under the Local Electoral Act 2001 and result from the division of a region for electoral purposes. Māori constituencies are divisions of regional council areas. They are created, based on population, to be the voting areas within councils. Māori constituencies are defined at meshblock level. If a regional council decides to have a Māori constituency, the constituencies within the council are known as general constituencies and Māori constituencies.

Names are provided with and without tohutō/macrons. The column name for those without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105149
Data type Vector multipolygon
Feature count 20
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Area Unit 2006

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

9946
93
Added
20 Oct 2016

This dataset was first added to Stats NZ Geographic Data Service on 20 Oct 2016.

This is the definitive set of area unit boundaries for 2006 as defined by Statistics New Zealand as at 1 January 2006.
Area units are aggregations of adjacent meshblocks with coterminous boundaries to form a single unbroken surface area (land and/or water). Exceptions to this rule are some area units comprising collections of geographically related inlets and marinas.
In an urban location, an area unit is often a collection of city blocks, while in rural situations area units may be equated to localities or communities. Area units must either define or aggregate to define urban areas, rural centres, statistical areas, territorial authorities, and regional councils.
Each area unit must be a single geographic entity with a unique name. The area unit pattern is revised once every five years in the year immediately before a Census of Population and Dwellings. There may also be changes in other years, in conjunction with local body boundary changes. Statistics New Zealand maintains a concordance file to ensure boundaries relating to earlier area unit patterns can also be generated.

Layer ID 25742
Data type Vector multipolygon
Feature count 1909
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Ward 2019 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

10290
269
Updated
05 May 2019

This dataset was last updated on Stats NZ Geographic Data Service on 05 May 2019.

This dataset is the definitive set of ward boundaries 1 January 2019 as defined by the territorial authorities and/or Local Government Commission, and maintained by Stats NZ. Wards are defined under the Local Electoral Act 2001 and result from dividing a territorial authority for electoral purposes. Wards are defined at meshblock level.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2019 Ward attachment below.

Digital boundary data became freely available on 1 July 2007.

Layer ID 98742
Data type Vector multipolygon
Feature count 245
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2020 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4181
178
Updated
28 Jun 2020

This dataset was last updated on Stats NZ Geographic Data Service on 28 Jun 2020.

This dataset contains the annually released statistical area 2 (SA2) boundaries for 2020 as defined by Stats NZ, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 2,173 SA2 categories.

SA2s were introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA2018) which replaced he New Zealand Standard Areas Classification (NZSAC1992). The SA2 geography replaces the (NZSAC1992) area unit geography. This version contains 2,173 SA2s.

SA2 is an output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. The SA2 geography aims to reflect communities that interact together socially and economically. In populated areas, SA2s generally contain similar sized populations.

SA2s are built from SA1s and either define or aggregate to define urban rural areas, territorial authorities, and regional councils. SA2s in city council areas generally have a population of 2,000–4,000 residents while SA2s in district council areas generally have a population of 1,000–3,000 residents. In rural areas, many SA2s have fewer than 1,000 residents because they are in conservation areas or contain sparse populations that cover a large area.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104270
Data type Vector multipolygon
Feature count 2173
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Urban Rural 2018 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

16315
387
Added
03 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.

This dataset is the definitive set of urban rural boundaries at 1 January 2018 as defined by Stats NZ. Urban rural is a new output geography that classifies New Zealand into areas that share common urban or rural characteristics. Urban areas are built from the Statistical Area 2 geography, while rural and water areas are built from the Statistical Area 1 geography. Urban areas are statistically defined areas with no administrative or legal basis. The urban rural indicator is an attribute of this classification and provides additional information about a location's urban or rural nature.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Urban Rural or ANZLIC Metadata 2018 Urban Rural Indicator attachments below.

Layer ID 92218
Data type Vector multipolygon
Feature count 722 (incl. 4 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Territorial Authority 2010

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6436
73
Added
04 Apr 2019

This dataset was first added to Stats NZ Geographic Data Service on 04 Apr 2019.

This dataset is a definitive set of territorial authority boundaries for 2010 as defined by the Local Government Commission and/or the territorial authorities themselves but maintained by Statistics New Zealand (the custodian). A territorial authority is defined under the Local Government Act 2002 as a city or a district council.

Layer ID 99745
Data type Vector multipolygon
Feature count 74
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 2021 (Centroid Inside)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1357
13
Added
07 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 07 Dec 2020.

This dataset contains the inside centroid point layer for the annually released statistical area 1 (SA1) boundaries as at 1 January 2021. The "inside" centroid is a point which always falls inside each SA1 polygon as this is often desirable. The placement of the point is typically in the widest part of the polygon. The algorithms used are proprietary to ESRI and are related to label placement. Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the SA1 geometry. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 105165
Data type Vector point
Feature count 29894
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Subdivision 2021 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1330
39
Added
01 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 01 Dec 2020.

This dataset contains the annually released territorial authority subdivision boundaries for 2021, as defined by the territorial authorities and/or Local Government Commission and maintained by Stats NZ (the custodian), clipped to the coastline.This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 145 categories.

Subdivisions are set up under the Local Government Act 2002 and Local Electoral Act 2001. A subdivision is a division of a community or local board area for electoral purposes. Subdivisions are defined at meshblock level, and do not coincide with the statistical area 1 (SA1) geography or the statistical area 2 (SA2) geography. A number of territorial authorities do not have subdivisions, and if they do, the subdivisions do not necessarily cover the whole territorial authority area. Subdivisions nest within community or local boards. Where a community or local board is divided into subdivisions all of the community or local board area must be included in a subdivision.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105138
Data type Vector multipolygon
Feature count 145
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 61 to 70 of 262