Urban Accessibility 2018 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3530
74
Added
27 Sep 2020

This dataset was first added to Stats NZ Geographic Data Service on 27 Sep 2020.

The urban accessibility (UA) classification measures the degree of urban influence New Zealand’s urban areas have on surrounding rural areas. It classifies the geographic accessibility of rural statistical area 1s (SA1s) and small urban areas according to their proximity, or degree of remoteness, to larger urban areas. This classification provides increased understanding of the heterogeneity of rural areas and small urban areas and will allow more extensive analysis and reporting. Understanding the degree of urban accessibility or remoteness is important as it has a major influence on the employment sector, accessibility to services, and population composition and change.
The methodology uses drive time from an SA1 address weighted centroid to the outside boundary of the nearest major, large, and medium urban area (from Stats NZ urban rural (UR) classification) to classify rural SA1s and small urban areas to one of five categories of accessibility or remoteness. The Open Source Routing Machine service using the OpenStreetMap road network is used to calculate the drive times.

A concordance between SA1 and Urban Accessibility can be found on Aria.

Rural SA1s and small urban areas are classified to the following categories:

·High urban accessibility:
0 to15 minutes from major urban areas

·Medium urban accessibility:
15 to 25 minutes from major urban areas
0 to 25 minutes from large urban areas
0 to 15 minutes from medium urban areas

·Low urban accessibility:
25 to 60 minutes from major or large urban areas
15 to 60 minutes from medium urban areas

·Remote:
60 to 120 minutes from major, large or medium urban areas

·Very remote:
more than 120 minutes from major, large or medium urban areas

For more information refer to: Urban accessibility - methodology and classification.

The full classification is shown below:
111 Major urban area

112 Large urban area

113 Medium urban area

221 High urban accessibility

222 Medium urban accessibility

223 Low urban accessibility

224 Remote

225 Very remote

331 Inland water

332 Inlet

333 Oceanic

Note: Areas of 221 High urban accessibility and 222 Medium urban accessibility may be regarded as peri-urban in nature and combined with urban areas for analytical purposes.

Layer ID 105022
Data type Vector multipolygon
Feature count 11
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 Higher Geographies 2021 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1488
19
Added
07 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 07 Dec 2020.

This dataset is the definitive version of annually released statistical area 2 (SA2) boundaries concorded to higher geographies for 2021 as defined by Stats NZ. this version contains 2,259 categories.

This statistical area 2 higher geographies file is a correspondence, or concordance, which relates SA2s to larger geographic areas or 'higher geographies'. The higher geographies contained in this concordance are: territorial authority (TA) and regional council (REGC). For more information on the individual higher geographies, refer to each geography’s metadata.

SA2s were introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA2018) which replaced the New Zealand Standard Areas Classification (NZSAC1992). The SA2 geography replaces the (NZSAC1992) area unit geography.

Names are provided with and without tohutō/macrons, as applicable. Column names for those without macrons are suffixed ‘ascii’. For further information on individual higher geographies, refer to each geography’s metadata.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105174
Data type Vector multipolygon
Feature count 2259 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Subdivision 2021 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1330
39
Added
01 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 01 Dec 2020.

This dataset contains the annually released territorial authority subdivision boundaries for 2021, as defined by the territorial authorities and/or Local Government Commission and maintained by Stats NZ (the custodian), clipped to the coastline.This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 145 categories.

Subdivisions are set up under the Local Government Act 2002 and Local Electoral Act 2001. A subdivision is a division of a community or local board area for electoral purposes. Subdivisions are defined at meshblock level, and do not coincide with the statistical area 1 (SA1) geography or the statistical area 2 (SA2) geography. A number of territorial authorities do not have subdivisions, and if they do, the subdivisions do not necessarily cover the whole territorial authority area. Subdivisions nest within community or local boards. Where a community or local board is divided into subdivisions all of the community or local board area must be included in a subdivision.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105138
Data type Vector multipolygon
Feature count 145
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Territorial Authority 2019 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

13202
680
Updated
03 May 2019

This dataset was last updated on Stats NZ Geographic Data Service on 03 May 2019.

This dataset is the definitive set of annually released territorial authority boundaries at 1 January 2019 as defined by the territorial authorities and/or Local Government Commission, and maintained by Stats NZ. A territorial authority is defined under the Local Government Act 2002 as a city or a district council. Territorial authorities are the second tier of local government in New Zealand, below regional councils.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2019 Territorial Authority attachment below.

Layer ID 98755
Data type Vector multipolygon
Feature count 68
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Territorial Authority 2016 Generalised Version

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12329
157
Added
07 Dec 2015

This dataset was first added to Stats NZ Geographic Data Service on 07 Dec 2015.

Territorial Authority 2016 Generalised Version is the definitive set of territorial authority boundaries for 2016 as defined by the Local Government Commission and/or the territorial authorities themselves but maintained by Statistics New Zealand (the custodian). A territorial authority is defined under the Local Government Act 2002 as a city or a district council.

Layer ID 8409
Data type Vector multipolygon
Feature count 68
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Community Board 2021 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1358
17
Added
01 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 01 Dec 2020.

This dataset contains annually released community board boundaries for 2021 as defined by the territorial authorities and Local Government Commission but maintained by Stats NZ (the custodian), clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 187 categories.

Community boards are set up under the Local Government Act 2002 and Local Electoral Act 2001. Their purpose is to administer the affairs of communities with populations not less than 1,500 within rural, urban, or metropolitan districts of a territorial authority.

Local boards also fall within the community board classification. Local boards were introduced as part of the new local government arrangements for Auckland in 2010. Local boards share governance with a council’s governing body and each has complementary responsibilities, guaranteed by legislation. There are 21 local boards in the Auckland Council.

Names are provided with and without tohutō/macrons. The column name for those without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105132
Data type Vector multipolygon
Feature count 187
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Regional Council 2018 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

10057
379
Added
03 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.

This dataset is the major released version of the annually released regional council boundaries at 1 January 2018, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. Regional council is the top tier of local government in New Zealand. Regional councils are defined at meshblock, statistical area 1 (SA1), and statistical area 2 (SA2) levels.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Regional Council attachment below.

Layer ID 92205
Data type Vector multipolygon
Feature count 17
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2020 (Centroid True)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2353
29
Updated
29 Jun 2020

This dataset was last updated on Stats NZ Geographic Data Service on 29 Jun 2020.

This dataset contains the true centroid point layer for the annually released statistical area 2 (SA2) boundaries as at 1 January 2020. The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the location of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the SA2 polygon, depending on the shape of the polygon. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 104420
Data type Vector point
Feature count 2239
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Territorial Authority 2020 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6747
471
Updated
29 Jan 2020

This dataset was last updated on Stats NZ Geographic Data Service on 29 Jan 2020.

This dataset contains the annually released territorial authority boundaries for 2020, as defined by the territorial authorities and/or Local Government Commission and maintained by Stats NZ (the custodian), clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 68 categories.

A territorial authority is defined under the Local Government Act 2002 as a city or a district council. There are 67 territorial authorities in New Zealand. Some territorial authority boundaries are coterminous with regional council boundaries but there are several exceptions. An example is Taupo District, which is split between four regions, although most of its area falls within the Waikato Region. Territorial authorities are defined at meshblock, statistical area 1 (SA1) and statistical area 2 (SA2) levels.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104266
Data type Vector multipolygon
Feature count 68
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Māori Ward 2021 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1371
8
Added
06 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 06 Dec 2020.

This dataset is the definitive set of Māori ward boundaries for 2021 as defined by the territorial authorities and/or Local Government Commission but maintained by Stats NZ (the custodian). This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 68 categories.

The Local Electoral Act 2001 provides that Māori wards may be established in territorial authorities. The statutory provisions for establishing Māori wards are set out in sections 19Z to 19ZH of the Local Electoral Act 2001. The first Māori ward was established by representation review in 2019 and appears in the 2020 geographic boundaries released by Stats NZ. The first Māori ward to be created is Wairoa Māori ward (02901) in the Wairoa District. Māori ward boundaries are defined at meshblock level.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105157
Data type Vector multipolygon
Feature count 68
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 71 to 80 of 262