Statistical Area 2 2020 (Centroid True)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2353
29
Updated
29 Jun 2020

This dataset was last updated on Stats NZ Geographic Data Service on 29 Jun 2020.

This dataset contains the true centroid point layer for the annually released statistical area 2 (SA2) boundaries as at 1 January 2020. The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the location of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the SA2 polygon, depending on the shape of the polygon. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 104420
Data type Vector point
Feature count 2239
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Urban Accessibility 2018 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3530
74
Added
27 Sep 2020

This dataset was first added to Stats NZ Geographic Data Service on 27 Sep 2020.

The urban accessibility (UA) classification measures the degree of urban influence New Zealand’s urban areas have on surrounding rural areas. It classifies the geographic accessibility of rural statistical area 1s (SA1s) and small urban areas according to their proximity, or degree of remoteness, to larger urban areas. This classification provides increased understanding of the heterogeneity of rural areas and small urban areas and will allow more extensive analysis and reporting. Understanding the degree of urban accessibility or remoteness is important as it has a major influence on the employment sector, accessibility to services, and population composition and change.
The methodology uses drive time from an SA1 address weighted centroid to the outside boundary of the nearest major, large, and medium urban area (from Stats NZ urban rural (UR) classification) to classify rural SA1s and small urban areas to one of five categories of accessibility or remoteness. The Open Source Routing Machine service using the OpenStreetMap road network is used to calculate the drive times.

A concordance between SA1 and Urban Accessibility can be found on Aria.

Rural SA1s and small urban areas are classified to the following categories:

·High urban accessibility:
0 to15 minutes from major urban areas

·Medium urban accessibility:
15 to 25 minutes from major urban areas
0 to 25 minutes from large urban areas
0 to 15 minutes from medium urban areas

·Low urban accessibility:
25 to 60 minutes from major or large urban areas
15 to 60 minutes from medium urban areas

·Remote:
60 to 120 minutes from major, large or medium urban areas

·Very remote:
more than 120 minutes from major, large or medium urban areas

For more information refer to: Urban accessibility - methodology and classification.

The full classification is shown below:
111 Major urban area

112 Large urban area

113 Medium urban area

221 High urban accessibility

222 Medium urban accessibility

223 Low urban accessibility

224 Remote

225 Very remote

331 Inland water

332 Inlet

333 Oceanic

Note: Areas of 221 High urban accessibility and 222 Medium urban accessibility may be regarded as peri-urban in nature and combined with urban areas for analytical purposes.

Layer ID 105022
Data type Vector multipolygon
Feature count 11
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 Higher Geographies 2019 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8402
73
Updated
29 Jun 2020

This dataset was last updated on Stats NZ Geographic Data Service on 29 Jun 2020.

This dataset is the definitive version of statistical area 2 (SA2) boundaries concorded to higher geographies as at 1 January 2019 as defined by Stats NZ.

This statistical area 2 higher geographies file is a correspondence, or concordance, which relates SA2s to larger geographic areas or 'higher geographies'. The higher geographies contained in this concordance are: territorial authority (TA) and regional council (REGC).

Statistical area 2 was created as part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaces the 1992 New Zealand Standard Areas Classification (NZSAC92). The statistical standard for geographic areas is to be used from 2018 (SSGA18). It defines the Stats NZ input and output geographic classifications and describes their primary purposes, and sets out requirements and guidelines for the creation and maintenance of statistical geographies.

Statistical area 2 (SA2) provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. The SA2 geography aims to reflect communities that interact together socially and economically. In populated areas, SA2s generally contain similar sized populations.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Layer ID 98779
Data type Vector multipolygon
Feature count 2255 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 2018 (high definition)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

13528
417
Added
01 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 01 Dec 2017.

This dataset is a high definition (HD) version of the annually released meshblock boundaries at 1 January 2018. This HD version is the most detailed geometry, suitable for use in GIS for geometric analysis operations and for the computation of areas, centroids and other metrics. The HD version is aligned to the LINZ cadastre. Stats NZ maintains an annual meshblock geography for collecting and producing statistical data. This allows data to be compared over time. A meshblock is the smallest geographic unit for which statistical data is collected and processed by Stats NZ. A meshblock is defined by a geographic area, which can vary in size from part of a city block to a large area of rural land. Each meshblock borders on another to form a network covering all of New Zealand, including coasts and inlets and extending out to the 200-mile economic zone. Meshblocks are added together to build up larger geographic areas such as statistical area 1 (SA1), statistical area 2 (SA2), and urban rural. They are also used to define electoral districts, territorial authorities, and regional councils. The digital geographic boundaries are defined and maintained by Stats NZ. Meshblocks cover the land area of New Zealand, the water area to the 12-mile limit, the Chatham Islands, Kermadec Islands, sub-Antarctic islands, off-shore oil rigs, and Ross Dependency.

Digital boundary data became freely available on 1 July 2007.

There are 16 meshblocks not held in digitised form.

For further information see ANZLIC Metadata 2018 Meshblock attachment below.

Layer ID 92199
Data type Vector multipolygon
Feature count 53589 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Regional Council 2014 (clipped)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

606
5
Added
28 Jul 2021

This dataset was first added to Stats NZ Geographic Data Service on 28 Jul 2021.

This dataset is the definitive set of regional council boundaries for 2014 as defined by the Local Government Commission and/or regional councils themselves but maintained by Statistics New Zealand (the custodian).

The regional council is the top tier of local government in New Zealand. There are 16 regional councils in New Zealand (defined by Part 1 of Schedule 2 of the Local Government Act 2002).

Regional councils are responsible for the administration of many environmental and transport matters such as land transport planning and harbour navigation and safety. Regional councils are defined at meshblock and area unit level.

As at 1st July 2007, Digital Boundary data became freely available.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Layer ID 105761
Data type Vector multipolygon
Feature count 17
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Territorial Authority 2001

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8779
47
Added
20 Oct 2016

This dataset was first added to Stats NZ Geographic Data Service on 20 Oct 2016.

This dataset is the definitive set of territorial authority boundaries for 2001 as defined by the Local Government Commission and/or the territorial authorities themselves but maintained by Statistics New Zealand (the custodian). A territorial authority is defined under the Local Government Act 2002 as a city or a district council.

Layer ID 25737
Data type Vector multipolygon
Feature count 74
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Regional Council 2018 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

10057
379
Added
03 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.

This dataset is the major released version of the annually released regional council boundaries at 1 January 2018, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. Regional council is the top tier of local government in New Zealand. Regional councils are defined at meshblock, statistical area 1 (SA1), and statistical area 2 (SA2) levels.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Regional Council attachment below.

Layer ID 92205
Data type Vector multipolygon
Feature count 17
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock Higher Geographies 2020 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1739
63
Updated
31 Jan 2020

This dataset was last updated on Stats NZ Geographic Data Service on 31 Jan 2020.

This dataset is the definitive set of annually released meshblock boundaries concorded to higher geographies for 2020. This version contains 53,596 meshblocks, including 16 with empty or null geometries (non-digitised meshblocks).

This Meshblock Higher Geographies 2020 file is a correspondence, or concordance, which relates meshblocks to larger geographic areas or 'higher geographies'. The higher geographies contained in this concordance are: community board (CB2020), constituency (CON2020), Māori constituency (MCON2020), Māoriward (MWARD2020), regional council (REGC2020), statistical area 1 (SA12020), statistical area 2 (SA22020), territorial authority local board (TALB2020), territorial authority (TA2020), subdivision (TASUB2020), urban rural (UR2020), urban rural indicator (IUR2020), and ward (WARD2020). The following geographies were first introduced in 2018: statistical area 1 (SA1), statistical area 2 (SA2), urban rural (UR), and urban rural indicator (IUR) as part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaced the 1992 New Zealand Standard Areas Classification (NZSAC92).

Higher geography names are provided with and without tohutō/macrons, as applicable. Column names for those without macrons are suffixed ‘ascii’. For further information on individual higher geographies, refer to each geography’s metadata.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

See the Geographic Areas File 2020 for a correspondence of meshblock to a range of geographies.

Layer ID 104277
Data type Vector multipolygon
Feature count 53596 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Subdivision 2020 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4847
38
Updated
02 Feb 2020

This dataset was last updated on Stats NZ Geographic Data Service on 02 Feb 2020.

This dataset is the definitive set of annually released (territorial authority) subdivision boundaries for 2020, as defined by the territorial authorities and/or Local Government Commission and maintained by Stats NZ (the custodian). This version contains 145 categories.

Subdivisions are set up under the Local Government Act 2002 and Local Electoral Act 2001. A subdivision is a division of a community or local board area for electoral purposes. Subdivisions are defined at meshblock level, and do not coincide with the statistical area 1 (SA1) geography or the statistical area 2 (SA2) geography. A number of territorial authorities do not have subdivisions, and if they do, the subdivisions do not necessarily cover the whole territorial authority area. Subdivisions nest within community or local boards. Where a community or local board is divided into subdivisions all of the community or local board area must be included in a subdivision.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104259
Data type Vector multipolygon
Feature count 145
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Area Unit 2014 (clipped)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

565
38
Added
27 Jul 2021

This dataset was first added to Stats NZ Geographic Data Service on 27 Jul 2021.

This dataset is the definitive set of area unit boundaries for 2014 as defined by Statistics New Zealand.

Area units are aggregations of adjacent meshblocks with coterminous boundaries to form a single unbroken surface area (land and/or water). Each area unit must be a single geographic entity with a unique name.

The area unit pattern is revised once every five years in the year immediately prior to the taking of a Census of Population and Dwellings.

As at 1st July 2007, Digital Boundary data became freely available.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Layer ID 105746
Data type Vector multipolygon
Feature count 1911
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 81 to 90 of 262