Community Board 2021 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3770
20
Added
01 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 01 Dec 2020.

This dataset contains annually released community board boundaries for 2021 as defined by the territorial authorities and Local Government Commission but maintained by Stats NZ (the custodian), clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 187 categories.

Community boards are set up under the Local Government Act 2002 and Local Electoral Act 2001. Their purpose is to administer the affairs of communities with populations not less than 1,500 within rural, urban, or metropolitan districts of a territorial authority.

Local boards also fall within the community board classification. Local boards were introduced as part of the new local government arrangements for Auckland in 2010. Local boards share governance with a council’s governing body and each has complementary responsibilities, guaranteed by legislation. There are 21 local boards in the Auckland Council.

Names are provided with and without tohutō/macrons. The column name for those without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105132
Data type Vector multipolygon
Feature count 187
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Community Board 2021 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4057
43
Added
01 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 01 Dec 2020.

This dataset is the definitive set of community board boundaries for 2021 as defined by the territorial authorities and Local Government Commission but maintained by Stats NZ (the custodian). Community boards are set up under the Local Government Act 2002 and Local Electoral Act 2001. Their purpose is to administer the affairs of communities with populations not less than 1,500 within rural, urban, or metropolitan districts of a territorial authority.

Local boards also fall within the community board classification. Local boards were introduced as part of the new local government arrangements for Auckland in 2010. Local boards share governance with a council’s governing body and each has complementary responsibilities, guaranteed by legislation. Local boards can propose bylaws and they gather community views on local and regional matters.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105130
Data type Vector multipolygon
Feature count 187
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Urban Accessibility 2018 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7604
93
Added
27 Sep 2020

This dataset was first added to Stats NZ Geographic Data Service on 27 Sep 2020.

The urban accessibility (UA) classification measures the degree of urban influence New Zealand’s urban areas have on surrounding rural areas. It classifies the geographic accessibility of rural statistical area 1s (SA1s) and small urban areas according to their proximity, or degree of remoteness, to larger urban areas. This classification provides increased understanding of the heterogeneity of rural areas and small urban areas and will allow more extensive analysis and reporting. Understanding the degree of urban accessibility or remoteness is important as it has a major influence on the employment sector, accessibility to services, and population composition and change.
The methodology uses drive time from an SA1 address weighted centroid to the outside boundary of the nearest major, large, and medium urban area (from Stats NZ urban rural (UR) classification) to classify rural SA1s and small urban areas to one of five categories of accessibility or remoteness. The Open Source Routing Machine service using the OpenStreetMap road network is used to calculate the drive times.

A concordance between SA1 and Urban Accessibility can be found on Aria.

Rural SA1s and small urban areas are classified to the following categories:

·High urban accessibility:
0 to15 minutes from major urban areas

·Medium urban accessibility:
15 to 25 minutes from major urban areas
0 to 25 minutes from large urban areas
0 to 15 minutes from medium urban areas

·Low urban accessibility:
25 to 60 minutes from major or large urban areas
15 to 60 minutes from medium urban areas

·Remote:
60 to 120 minutes from major, large or medium urban areas

·Very remote:
more than 120 minutes from major, large or medium urban areas

For more information refer to: Urban accessibility - methodology and classification.

The full classification is shown below:
111 Major urban area

112 Large urban area

113 Medium urban area

221 High urban accessibility

222 Medium urban accessibility

223 Low urban accessibility

224 Remote

225 Very remote

331 Inland water

332 Inlet

333 Oceanic

Note: Areas of 221 High urban accessibility and 222 Medium urban accessibility may be regarded as peri-urban in nature and combined with urban areas for analytical purposes.

Layer ID 105022
Data type Vector multipolygon
Feature count 11
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 2020 (Centroid Inside)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6383
76
Added
20 Jan 2020

This dataset was first added to Stats NZ Geographic Data Service on 20 Jan 2020.

This dataset contains the inside centroid point layer for the annually released meshblock boundaries as at 1 January 2020.The "inside" centroid is a point which always falls inside each meshblock polygon as this is often desirable. The placement of the point is typically in the widest part of the polygon. The algorithms used are proprietary to ESRI and are related to label placement. Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the meshblock polygon. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection. Non-digitised meshblocks cannot have a centroid.

Layer ID 104430
Data type Vector point
Feature count 53580
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 2020 (Centroid True)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5121
53
Added
20 Jan 2020

This dataset was first added to Stats NZ Geographic Data Service on 20 Jan 2020.

This dataset contains the true centroid point layer for the annually released meshblock boundaries as at 1 January 2020.The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the locations of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the meshblock polygon, depending on the shape of the polygon. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.Non-digitised meshblocks cannot have a centroid.

Layer ID 104429
Data type Vector point
Feature count 53580
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 2020 (Centroid Inside)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3798
36
Added
20 Jan 2020

This dataset was first added to Stats NZ Geographic Data Service on 20 Jan 2020.

This dataset contains the inside centroid point layer for the annually released statistical area 1 (SA1) boundaries as at 1 January 2020.The "inside" centroid is a point which always falls inside each SA1 polygon as this is often desirable. The placement of the point is typically in the widest part of the polygon. The algorithms used are proprietary to ESRI and are related to label placement. Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the SA1 geometry. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 104428
Data type Vector point
Feature count 29879
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 2020 (Centroid True)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7244
42
Added
19 Jan 2020

This dataset was first added to Stats NZ Geographic Data Service on 19 Jan 2020.

This dataset contains the true centroid point layer for the annually released statistical area 1 (SA1) boundaries as at 1 January 2020.The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the location of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the SA1 polygon, depending on the shape of the polygon.The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 104427
Data type Vector point
Feature count 29879
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2020 (Centroid Inside)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7739
46
Updated
30 Jun 2020

This dataset was last updated on Stats NZ Geographic Data Service on 30 Jun 2020.

This dataset contains the inside centroid point layer for the annually released statistical area 2 (SA2) boundaries as at 1 January 2020.The "inside" centroid is a point which always falls inside each SA2 polygon as this is often desirable. The placement of the point is typically in the widest part of the polygon. The algorithms used are proprietary to ESRI and are related to label placement. Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the SA2 geometry. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 104426
Data type Vector point
Feature count 2239
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2020 (Centroid True)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5063
42
Updated
29 Jun 2020

This dataset was last updated on Stats NZ Geographic Data Service on 29 Jun 2020.

This dataset contains the true centroid point layer for the annually released statistical area 2 (SA2) boundaries as at 1 January 2020. The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the location of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the SA2 polygon, depending on the shape of the polygon. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 104420
Data type Vector point
Feature count 2239
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 2020 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

14887
461
Updated
02 Feb 2020

This dataset was last updated on Stats NZ Geographic Data Service on 02 Feb 2020.

This dataset is the definitive set of annually released meshblock boundaries for 2020 as defined by Stats NZ. This version contains 53,596 meshblocks.

Stats NZ maintains an annual meshblock geography for collecting and producing statistical data. This allows data to be compared over time. A meshblock is the smallest geographic unit for which statistical data is collected and processed by Stats NZ. A meshblock is defined by a geographic area, which can vary in size from part of a city block to a large area of rural land. Each meshblock borders on another to form a network covering all of New Zealand, including coasts and inlets and extending out to the 200-mile economic zone. Meshblocks are added together to build up larger geographic areas such as statistical area 1 (SA1), statistical area 2 (SA2), and urban rural. They are also used to define electoral districts, territorial authorities, and regional councils.

The following 16 meshblocks are outside the 12 mile limit and are not held in digitised form: 0016901, 0016902, 1588000, 3166401, 3166402, 3166600, 3166710, 3166711, 3195000, 3196001, 3196002, 3196003, 3196004, 3196005, 3196006, 3196007.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

The meshblock classification can also be downloaded from the Stats NZ classification and concordance tool Ariā.

Layer ID 104280
Data type Vector multipolygon
Feature count 53596 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 111 to 120 of 284