Functional Urban Area 2022 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1608
27
Added
01 Dec 2021

This dataset was first added to Stats NZ Geographic Data Service on 01 Dec 2021.

The functional urban area (FUA) classification identifies small urban areas and rural areas that are integrated with major, large, and medium urban areas to create FUAs. This dataset is clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries.

Workplace address and usual residence address data from the 2018 Census of Population and Dwellings were used to identify satellite urban areas (1,000–4,999 residents), and rural statistical area 1s (SA1s) from which at least 40 percent of workers commuted to urban areas with more than 5,000 residents.

An FUA includes Urban rural (UR) 2018 urban areas, rural settlements and rural SA1s where there is: an urban core, one or more secondary urban cores, one or more satellite urban areas, and rural hinterland (rural settlements or rural SA1s).

The FUA indicator (IFUA) classifies UR2018 urban areas and rural SA1s according to their character within their FUA, e.g., urban core, satellite urban area. The information from the Stats NZ classification can be accessed using the classification tool Ariā.

The 53 FUAs are classified by population size. The urban core’s population rather than the entire FUA’s population is used to maintain consistency between the descriptions of UR2018 urban area and FUA type (TFUA).

FUAs that have more than 100,000 residents living in their urban core are known as metropolitan areas, while smaller FUAs are divided into large (core population 30,000–99,999), medium (core population 10,000–29,999), and small regional centres (core population 5,000–9,999).

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

For more detail, and classifications, please refer to Ariā.

Digital boundary data became freely available on 1 July 2007.

Layer ID 106705
Data type Vector multipolygon
Feature count 139
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 Higher Geographies 2020 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3501
73
Updated
30 Jan 2020

This dataset was last updated on Stats NZ Geographic Data Service on 30 Jan 2020.

This dataset is the definitive set of annually released statistical area 1 (SA1) boundaries concorded to higher geographies for 2020 as defined by Stats NZ. This version contains 29,895 SA1s including 16 with empty or null geometries (non-digitised SA1s).

This SA1 higher geographies 2020 file is a correspondence, or concordance, which relates SA1s to larger geographic areas or 'higher geographies'. The higher geographies contained in this concordance are: regional council (REGC2020), statistical area 2 (SA22020), territorial authority (TA2020), urban rural (UR2020), and urban rural indicator (IUR2020). The following geographies were introduced in 2018: statistical area 1 (SA1), statistical area 2 (SA2), urban rural (UR), and urban rural indicator (IUR) as part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaced the 1992 New Zealand Standard Areas Classification (NZSAC92).

Higher geography names are provided with and without tohutō/macrons, as applicable. Column names for those without macrons are suffixed ‘ascii’. For further information on individual higher geographies, refer to each geography’s metadata.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104276
Data type Vector multipolygon
Feature count 29895 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Regional Tourism Organisation Areas 2022

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

48
0
Added
03 Aug 2022

This dataset was first added to Stats NZ Geographic Data Service on 03 Aug 2022.

Regional tourism organisation boundaries are meshblock based and were created by dissolving groupings of ward and territorial authority areas. This version or regional tourism organisation boundaries extends to the 12-mile limit. Regional tourism organisations are responsible for the promotion of their regions to prospective domestic and international visitors. This version has been developed with input from Regional Tourism New Zealand.

RTO label represents the trading name of the organisation responsible for a region’s tourism marketing and/or economic development.

Note: Not all 37 categories representing regional tourism organisation areas are currently operating as regional tourism organisations at the time of publishing. Those areas not operating as regional tourism organisations are: Kawerau (06), Rangitīkei (14), Tararua (16), Horowhenua (18) and Waimate (28).

Fiordland includes Fiordland National Park, Manapouri, Te Anau, and Te Anau Downs areas with the rest of the area assigned to Southland. Where a regional tourism organisation area boundary crossed a meshblock the meshblock was assigned to whichever regional tourism organisation area the majority of the meshblock fell within.

The classification relating to this version can be viewed and downloaded from the Stats NZ classifications management system Ariā: Regional Tourism Organisation Areas V4.0.0.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

Layer ID 109935
Data type Vector multipolygon
Feature count 37
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Community Board 2019 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

10336
119
Updated
01 May 2019

This dataset was last updated on Stats NZ Geographic Data Service on 01 May 2019.

This dataset is the definitive set of community board/local board boundaries for 2019 as defined by the territorial authorities and/or Local Government Commission, and maintained by Stats NZ. This version contains 108 community boards and 21 Auckland local boards, excluding area outside community board. Community boards are set up under the Local Government Act 2002 and Local Electoral Act 2001. Their purpose is to administer the affairs of communities with populations not less than 1,500 within rural, urban, or metropolitan districts of a territorial authority. A community board’s functions, powers, and duties are delegated at the discretion of its parent territorial authority and these may differ between community boards. Community boards and their boundaries are reviewed in the year before the three-yearly local government elections. Community boards are numbered based on their corresponding territorial authority. Each community board has a unique five-digit number. The first three digits refer to the territorial authority that the community board lies within. The following two digits are sequential, and represent the number of community boards within the territorial authority. For example, Tararua District (041) has two community boards numbered 04101 and 04102. The rest of the district is not represented by a community board and is coded 04199 (Area Outside Community).Some territorial authorities do not have community boards and, if they do, the community boards do not necessarily cover the whole territorial authority area.The following table lists the total number of community boards by year:Year Community board totals 2000 147 2001 147 2002 147 2003 147 2004 147 2005 144 2006 v1 144 2006 v2 144 2007 144 2008 143 2009 143 2010 143 2011 137 2012 137 2013 137 2014 130 2015 130 2016 130 2017 129 2018 129 2019 129 Local boards also fall within the community board classification. Local boards were introduced as part of the new local government arrangements for Auckland in 2010. Local boards share governance with a council’s governing body and each has complementary responsibilities, guaranteed by legislation. Local boards can propose bylaws and they gather community views on local and regional matters. Local legislation enacted in 2012 allows for the establishment of local boards in areas of new unitary authorities that are predominantly urban and have a population of more than 400,000. The boundaries of local boards cannot be abolished or changed except through a reorganisation process. There are 21 local boards in the Auckland Council.Digital boundary data became freely available on 1 July 2007.

Layer ID 98744
Data type Vector multipolygon
Feature count 187
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 2022 (Centroid Inside)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1265
10
Added
01 Dec 2021

This dataset was first added to Stats NZ Geographic Data Service on 01 Dec 2021.

This dataset contains the inside centroid point layer for the annually released meshblock boundaries for 2022 as defined by Stats NZ (the custodian). The "inside" centroid is a point which always falls inside each meshblock polygon as this is often desirable. The placement of the point is typically in the widest part of the polygon.

The algorithms used are proprietary to ESRI and are related to label placement. Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the meshblock polygon.

The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection. Non-digitised meshblocks cannot have a centroid.

Layer ID 106718
Data type Vector point
Feature count 56966
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Ward 2020 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6002
98
Updated
22 Sep 2020

This dataset was last updated on Stats NZ Geographic Data Service on 22 Sep 2020.

This dataset contains the annually released ward boundaries for 2020 as defined by the territorial authorities and/or Local Government Commission, and maintained by Stats NZ (the custodian), clipped to the coastline.This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 239 categories.

Wards were originally set up within any territorial authority with a population of at least 20,000. Wards are defined under the Local Electoral Act 2001 and result from dividing a territorial authority for electoral purposes. The ward system was designed to allow for the recognition of communities within a territorial authority and to increase community involvement in the local government system.Territorial authorities can now choose whether they would like to maintain electoral wards. As a result, the number of wards has steadily decreased since they were first created in 1989. Ward boundaries are reviewed in the year before the three-yearly local government elections.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104262
Data type Vector multipolygon
Feature count 239
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Community Board 2014 (clipped)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2168
2
Added
23 Jul 2021

This dataset was first added to Stats NZ Geographic Data Service on 23 Jul 2021.

This dataset is the definitive set of community board boundaries for 2014 as defined by the territorial authorities and Local Government Commission but maintained by Statistics New Zealand, who is the custodian.

Community boards are set up under the Local Government Act 2002 and Local Electoral Act 2001. Their purpose is to administer the affairs of communities with populations not less than 1,500 within rural, urban or metropolitan districts of a territorial authority.

As at 1st July 2007, Digital Boundary data became freely available.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Layer ID 105734
Data type Vector multipolygon
Feature count 189
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Māori Ward 2021 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3029
10
Added
06 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 06 Dec 2020.

This dataset is the definitive set of Māori ward boundaries for 2021 as defined by the territorial authorities and/or Local Government Commission but maintained by Stats NZ (the custodian). This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 68 categories.

The Local Electoral Act 2001 provides that Māori wards may be established in territorial authorities. The statutory provisions for establishing Māori wards are set out in sections 19Z to 19ZH of the Local Electoral Act 2001. The first Māori ward was established by representation review in 2019 and appears in the 2020 geographic boundaries released by Stats NZ. The first Māori ward to be created is Wairoa Māori ward (02901) in the Wairoa District. Māori ward boundaries are defined at meshblock level.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105157
Data type Vector multipolygon
Feature count 68
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Subdivision 2020 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3056
31
Updated
31 Jan 2020

This dataset was last updated on Stats NZ Geographic Data Service on 31 Jan 2020.

This dataset contains the annually released territorial authority subdivision boundaries for 2020, as defined by the territorial authorities and/or Local Government Commission and maintained by Stats NZ (the custodian), clipped to the coastline.This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 145 categories.

Subdivisions are set up under the Local Government Act 2002 and Local Electoral Act 2001. A subdivision is a division of a community or local board area for electoral purposes. Subdivisions are defined at meshblock level, and do not coincide with the statistical area 1 (SA1) geography or the statistical area 2 (SA2) geography. A number of territorial authorities do not have subdivisions, and if they do, the subdivisions do not necessarily cover the whole territorial authority area. Subdivisions nest within community or local boards. Where a community or local board is divided into subdivisions all of the community or local board area must be included in a subdivision.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104257
Data type Vector multipolygon
Feature count 145
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Constituency 2021 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3014
50
Added
03 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2020.

This dataset contains the annually released regional council constituency boundaries for 2021, as defined by the regional councils and/or Local Government Commission and maintained by Stats NZ (the custodian), clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 64 categories.

Constituencies are established under the Local Electoral Act 2001 and result from the division of a region for electoral purposes.If a regional council decides to have a Māori constituency, the constituencies within the council are known as general constituencies and Māori constituencies.Constituencies are divisions of regional council areas. They are defined at meshblock level, and do not coincide with the statistical area 1 (SA1) geography or the statistical area 2 (SA2) geography. They are created, based on population, to be the voting areas within councils. Constituencies are required to reflect communities of interest. Their boundaries, so far as is practicable, coincide with those of territorial authorities or wards.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105145
Data type Vector multipolygon
Feature count 64
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 91 to 100 of 125