Tagged: Downloadable Data in New Zealand - Page 11

This dataset is the definitive set of annually released (territorial authority) subdivision boundaries for 2020, as defined by the territorial authorities and/or Local Government Commission and maintained by Stats NZ (the custodian). This version contains 145 categories.

Subdivisions are set up under the Local Government Act 2002 and Local Electoral Act 2001. A subdivision is a division of a community or local board area for electoral purposes. Subdivisions are defined at meshblock level, and do not coincide with the statistical area 1 (SA1) geography or the statistical area 2 (SA2) geography. A number of territorial authorities do not have subdivisions, and if they do, the subdivisions do not necessarily cover the whole territorial authority area. Subdivisions nest within community or local boards. Where a community or local board is divided into subdivisions all of the community or local board area must be included in a subdivision.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

The urban accessibility (UA) classification measures the degree of urban influence New Zealand’s urban areas have on surrounding rural areas. It classifies the geographic accessibility of rural statistical area 1s (SA1s) and small urban areas according to their proximity, or degree of remoteness, to larger urban areas. This classification provides increased understanding of the heterogeneity of rural areas and small urban areas and will allow more extensive analysis and reporting. Understanding the degree of urban accessibility or remoteness is important as it has a major influence on the employment sector, accessibility to services, and population composition and change.

The methodology uses drive time from an SA1 address weighted centroid to the outside boundary of the nearest major, large, and medium urban area (from Stats NZ urban rural (UR) classification) to classify rural SA1s and small urban areas to one of five categories of accessibility or remoteness. The Open Source Routing Machine service using the OpenStreetMap road network is used to calculate the drive times.

​

A concordance between SA1 and Urban Accessibility can be found on Aria.

​

Urban accessibility indicator is also available as an attribute on Statistical Area 1 Higher Geographies 2022 (generalised).

Rural SA1s and small urban areas are classified to the following categories:

·High urban accessibility:
0 to15 minutes from major urban areas

·Medium urban accessibility:
15 to 25 minutes from major urban areas
0 to 25 minutes from large urban areas
0 to 15 minutes from medium urban areas

·Low urban accessibility:
25 to 60 minutes from major or large urban areas
15 to 60 minutes from medium urban areas

·Remote:
60 to 120 minutes from major, large or medium urban areas

·Very remote:
more than 120 minutes from major, large or medium urban areas

​

For more information refer to: Urban accessibility - methodology and classification.

​

The full classification is shown below:

111 Major urban area

112 Large urban area

113 Medium urban area

221 High urban accessibility

222 Medium urban accessibility

223 Low urban accessibility

224 Remote

225 Very remote

331 Inland water

332 Inlet

333 Oceanic

​

Areas of 221 High urban accessibility and 222 Medium urban accessibility may be regarded as peri-urban in nature and combined with urban areas for analytical purposes.

​

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

This dataset is the definitive set of meshblock boundaries concorded to higher geographies for 2021. This version contains 53,598 meshblocks, including 16 with empty or null geometries (non-digitised meshblocks). This Meshblock Higher Geographies 2021 file is a correspondence, or concordance, which relates meshblocks to larger geographic areas or 'higher geographies'. The higher geographies contained in this concordance are: community board (CB2021), constituency (CON2021), Māori constituency (MCON2021), Māoriward (MWARD2021), regional council (REGC2021), statistical area 1 (SA12021), statistical area 2 (SA22021), territorial authority local board (TALB2021), territorial authority (TA2021), subdivision (TASUB2021), urban accessibility indicator (IUA2021), urban rural (UR2021), urban rural indicator (IUR2021), and ward (WARD2021).The following geographies were first introduced in 2018: statistical area 1 (SA1), statistical area 2 (SA2), urban rural (UR), and urban rural indicator (IUR) as part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaced the 1992 New Zealand Standard Areas Classification (NZSAC92). The geography urban accessibility indicator (IUA) was introduced for the first time in MBHG 2021.Higher geography names are provided with and without tohutō/macrons, as applicable. Column names for those without macrons are suffixed ‘ascii’.For further information on individual higher geographies, refer to the individual geography’s metadata. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

​

A link to the Geographic Areas Table 2021 can be found here.

This dataset is the definitive set of annually released statistical area 1 (SA1) boundaries for 2020 as defined by Stats NZ. This version contains 29,895 SA1 categories.

SA1s were introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaced the New Zealand Standard Areas Classification (NZSAC92). SA1 is a new output geography that allows the release of more detailed information about population characteristics than is available at the meshblock level.

Built by joining meshblocks, SA1s have an ideal size range of 100–200 residents, and a maximum population of about 500. This is to minimise suppression of population data in multivariate statistics tables. SA1s either define or aggregate to define SA2s, urban rural areas, territorial authorities, and regional councils. Some SA1s that contain apartment blocks, retirement villages, and large non-residential facilities have more than 500 residents.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

The SA1 classification can also be downloaded from the Stats NZ classification and concordance tool Ariā.

This dataset is the definitive set of annually released meshblock boundaries concorded to higher geographies for 2020. This version contains 53,596 meshblocks, including 16 with empty or null geometries (non-digitised meshblocks).

This Meshblock Higher Geographies 2020 file is a correspondence, or concordance, which relates meshblocks to larger geographic areas or 'higher geographies'. The higher geographies contained in this concordance are: community board (CB2020), constituency (CON2020), Māori constituency (MCON2020), Māoriward (MWARD2020), regional council (REGC2020), statistical area 1 (SA12020), statistical area 2 (SA22020), territorial authority local board (TALB2020), territorial authority (TA2020), subdivision (TASUB2020), urban rural (UR2020), urban rural indicator (IUR2020), and ward (WARD2020). The following geographies were first introduced in 2018: statistical area 1 (SA1), statistical area 2 (SA2), urban rural (UR), and urban rural indicator (IUR) as part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaced the 1992 New Zealand Standard Areas Classification (NZSAC92).

Higher geography names are provided with and without tohutō/macrons, as applicable. Column names for those without macrons are suffixed ‘ascii’. For further information on individual higher geographies, refer to each geography’s metadata.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

See the Geographic Areas File 2020 for a correspondence of meshblock to a range of geographies.

This dataset contains the true centroid point layer for the annually released statistical area 1 (SA1) boundaries as at 1 January 2021. The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the location of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the SA1 polygon, depending on the shape of the polygon.The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

This dataset is the definitive version of annually released statistical area 2 (SA2) boundaries concorded to higher geographies for 2022 as defined by Stats NZ (the custodian), this version contains 2,260 features.

This statistical area 2 higher geographies file is a correspondence, or concordance, which relates SA2s to larger geographic areas or 'higher geographies'. The higher geographies contained in this concordance are: territorial authority (TA) and regional council (REGC). For more information on the individual higher geographies, refer to each geography’s metadata.

SA2s were introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA2018) which replaced the New Zealand Standard Areas Classification (NZSAC1992). The SA2 geography replaces the (NZSAC1992) area unit geography.

Names are provided with and without tohutō/macrons, as applicable. Column names for those without macrons are suffixed ‘ascii’. For further information on individual higher geographies, refer to each geography’s metadata.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

This dataset is the definitive set of annually released territorial authority boundaries for 2021 as defined the territorial authorities and/or Local Government Commission and maintained by Stats NZ (the custodian). This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 68 categories.

A territorial authority is defined under the Local Government Act 2002 as a city or a district council. There are 67 territorial authorities in New Zealand. Some territorial authority boundaries are coterminous with regional council boundaries but there are several exceptions. An example is Taupo District, which is split between four regions, although most of its area falls within the Waikato Region. Territorial authorities are defined at meshblock, statistical area 1 (SA1) and statistical area 2 (SA2) levels.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

This dataset is the definitive set of annually released regional council Māori constituency boundaries for 2020 as defined by the regional councils and/or Local Government Commission, and maintained by Stats NZ (the custodian). This version contains 20 categories.

This version contains 5 Māori constituencies, excluding area outside constituency. Māori constituencies are established under the Local Electoral Act 2001 and result from the division of a region for electoral purposes. Māori constituencies are divisions of regional council areas. They are created, based on population, to be the voting areas within councils. Māori constituencies are defined at meshblock level. If a regional council decides to have a Māori constituency, the constituencies within the council are known as general constituencies and Māori constituencies.

Names are provided with and without tohutō/macrons. The column name for those without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

This dataset is the definitive set of annually released (territorial authority) subdivision boundaries for 2022, as defined by the territorial authorities and/or Local Government Commission and maintained by Stats NZ (the custodian), clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries.. This version contains 79 subdivisions, excluding area outside subdivision with a total of 145 features.

Subdivisions are set up under the Local Government Act 2002 and Local Electoral Act 2001. A subdivision is a division of a community or local board area for electoral purposes. Subdivisions are defined at meshblock level, and do not coincide with the statistical area 1 (SA1) geography or the statistical area 2 (SA2) geography. A number of territorial authorities do not have subdivisions, and if they do, the subdivisions do not necessarily cover the whole territorial authority area. Subdivisions nest within community or local boards. Where a community or local board is divided into subdivisions all of the community or local board area must be included in a subdivision.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.