Urban Accessibility Indicator 2021 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

17022
57
Added
06 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 06 Dec 2020.

The urban accessibility (UA) classification measures the degree of urban influence New Zealand’s urban areas have on surrounding rural areas. It classifies the geographic accessibility of rural statistical area 1s (SA1s) and small urban areas according to their proximity, or degree of remoteness, to larger urban areas. This classification provides increased understanding of the heterogeneity of rural areas and small urban areas and will allow more extensive analysis and reporting. Understanding the degree of urban accessibility or remoteness is important as it has a major influence on the employment sector, accessibility to services, and population composition and change.

The methodology uses drive time from an SA1 address weighted centroid to the outside boundary of the nearest major, large, and medium urban area (from Stats NZ urban rural (UR) classification) to classify rural SA1s and small urban areas to one of five categories of accessibility or remoteness. The Open Source Routing Machine service using the OpenStreetMap road network is used to calculate the drive times.

A concordance between SA1 and Urban Accessibility can be found on Aria.

Urban accessibility indicator is also available as an attribute on Statistical Area 1 Higher Geographies 2021 (generalised).

Rural SA1s and small urban areas are classified to the following categories:

·High urban accessibility:
0 to15 minutes from major urban areas

·Medium urban accessibility:
15 to 25 minutes from major urban areas
0 to 25 minutes from large urban areas
0 to 15 minutes from medium urban areas

·Low urban accessibility:
25 to 60 minutes from major or large urban areas
15 to 60 minutes from medium urban areas

·Remote:
60 to 120 minutes from major, large or medium urban areas

·Very remote:
more than 120 minutes from major, large or medium urban areas

For more information refer to: Urban accessibility - methodology and classification.

The full classification is shown below:

111 Major urban area

112 Large urban area

113 Medium urban area

221 High urban accessibility

222 Medium urban accessibility

223 Low urban accessibility

224 Remote

225 Very remote

331 Inland water

332 Inlet

333 Oceanic

Areas of 221 High urban accessibility and 222 Medium urban accessibility may be regarded as peri-urban in nature and combined with urban areas for analytical purposes.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105155
Data type Vector multipolygon
Feature count 11
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Ward 2022 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1726
72
Added
01 Dec 2021

This dataset was first added to Stats NZ Geographic Data Service on 01 Dec 2021.

This dataset is the definitive set of annually released ward boundaries for 2022 as defined by the territorial authorities and/or Local Government Commission, and maintained by Stats NZ (the custodian). This version contains 226 wards, excluding area outside ward and a total of 239 features.

Wards were originally set up within any territorial authority with a population of at least 20,000. Wards are defined under the Local Electoral Act 2001 and result from dividing a territorial authority for electoral purposes. The ward system was designed to allow for the recognition of communities within a territorial authority and to increase community involvement in the local government system. Territorial authorities can now choose whether they would like to maintain electoral wards. As a result, the number of wards has steadily decreased since they were first created in 1989. Ward boundaries are reviewed in the year before the three-yearly local government elections.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 106697
Data type Vector multipolygon
Feature count 239
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2021 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

13537
431
Updated
13 Jan 2021

This dataset was last updated on Stats NZ Geographic Data Service on 13 Jan 2021.

This dataset contains the annually released statistical area 2 (SA2) boundaries for 2021 as defined by Stats NZ, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 2,176 SA2 categories.

SA2s were introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA2018) which replaced he New Zealand Standard Areas Classification (NZSAC1992). The SA2 geography replaces the (NZSAC1992) area unit geography.

SA2 is an output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. The SA2 geography aims to reflect communities that interact together socially and economically. In populated areas, SA2s generally contain similar sized populations.

SA2s are built from SA1s and either define or aggregate to define urban rural areas, territorial authorities, and regional councils. SA2s in city council areas generally have a population of 2,000–4,000 residents while SA2s in district council areas generally have a population of 1,000–3,000 residents. In rural areas, many SA2s have fewer than 1,000 residents because they are in conservation areas or contain sparse populations that cover a large area.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105161
Data type Vector multipolygon
Feature count 2176
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Ethnic group by meshblock (2013 Census)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

16481
354
Added
11 Dec 2015

This dataset was first added to Stats NZ Geographic Data Service on 11 Dec 2015.

2013 Census meshblock dataset contains counts at meshblock levels for selected variables from the 2013 Census. The geographies correspond to 2013 Census boundaries. The counts are at the highest level of each variable’s classification.

Notes:
Confidentiality rules have been applied to all cells in this table, including randomly rounding to base 3.
-999 indicates cells have been suppressed for confidentiality reasons.
-995 indicates cells that could not be calculated.

Layer ID 8448
Data type Vector multipolygon
Feature count 46621
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Subdivision 2023 Provisional

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

423
29
Added
23 Jun 2022

This dataset was first added to Stats NZ Geographic Data Service on 23 Jun 2022.

This dataset is the provisional 2023 dataset for Subdivision. The final 2023 layer is scheduled to be published on 8 December 2022 as part of the annual boundary release.

The intention of providing this provisional dataset is to make available the boundaries that will be used for the local body elections being held in October 2022.

This dataset is the provisional set of subdivision boundaries for 2023 as defined by the territorial authorities and Local Government Commission but maintained by Stats NZ (the custodian). This version contains 81 subdivisions (excluding Area Outside Subdivision).

Subdivisions are set up under the Local Government Act 2002 and Local Electoral Act 2001. A subdivision is a division of a community or local board area for electoral purposes.

Subdivisions are defined at meshblock level, and do not coincide with the statistical area 1 (SA1) geography or the statistical area 2 (SA2) geography. A number of territorial authorities do not have subdivisions, and if they do, the subdivisions do not necessarily cover the whole territorial authority area. Subdivisions nest within community or local boards. Where a community or local board is divided into subdivisions all of the community or local board area must be included in a subdivision.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

Layer ID 109168
Data type Vector multipolygon
Feature count 147
Primary key TASUB2023_PROV
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

2018 Census Household total New Zealand by Statistical Area 1

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5115
394
Updated
21 May 2020

This dataset was last updated on Stats NZ Geographic Data Service on 21 May 2020.

This household dataset is displayed by statistical area 1 geography and contains information on:

• Total households

• Tenure of household

• Sector of landlord

• Weekly rent paid by household, including median weekly rent paid by household

• Number of motor vehicles

• Access to telecommunication systems (total responses)

This dataset contains counts at statistical area 1 for selected variables from the 2018, 2013, and 2006 censuses. The geography corresponds to 2018 boundaries.

The data uses fixed random rounding to protect confidentiality. Some counts of less than 6 are suppressed according to 2018 confidentiality rules. Values of ‘-999’ indicate suppressed data, and values of ‘-997’ indicate data not collected.

For further information on this dataset please refer to the Statistical area 1 dataset for 2018 Census webpage - footnotes for household, Excel workbooks, and CSV files are available to download. Data quality ratings for 2018 Census variables, summarising the quality rating and priority levels for 2018 Census variables, are available.

For information on the statistical area 1 geography please refer to the Statistical standard for geographic areas 2018.

Layer ID 104611
Data type Vector multipolygon
Feature count 29889 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Birthplace by meshblock (2013 Census)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

10991
53
Added
11 Dec 2015

This dataset was first added to Stats NZ Geographic Data Service on 11 Dec 2015.

2013 Census meshblock dataset contains counts at meshblock levels for selected variables from the 2013 Census. The geographies correspond to 2013 Census boundaries. The counts are at the highest level of each variable’s classification.

Notes:
Confidentiality rules have been applied to all cells in this table, including randomly rounding to base 3.
-999 indicates cells have been suppressed for confidentiality reasons.
-995 indicates cells that could not be calculated.

Layer ID 8442
Data type Vector multipolygon
Feature count 46621
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

2018 Census Dwelling total New Zealand by Statistical Area 1

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6017
487
Updated
16 Jun 2020

This dataset was last updated on Stats NZ Geographic Data Service on 16 Jun 2020.

This dwelling dataset is displayed by statistical area 1 geography and contains information on:

  • Occupied private dwelling type
  • Dwelling record type, for occupied dwellings
  • Occupied non-private dwelling type
  • Number of rooms
  • Number of bedrooms
  • Main types of heating used to heat dwellings (total responses)
  • Fuel types used to heat dwelling (total responses)
  • Dwelling occupancy status
  • Access to basic amenities
  • Dwelling dampness indicator
  • Dwelling mould indicator

This dataset contains counts at statistical area 1 for selected variables from the 2018, 2013, and 2006 censuses. The geography corresponds to 2018 boundaries.

The data uses fixed random rounding to protect confidentiality. Some counts of less than 6 are suppressed according to 2018 confidentiality rules. Values of ‘-999’ indicate suppressed data.

For further information on this dataset please refer to the Statistical area 1 dataset for 2018 Census webpage - footnotes for dwelling, Excel workbooks, and CSV files are available to download. Data quality ratings for 2018 Census variables, summarising the quality rating and priority levels for 2018 Census variables, are available.

For information on the statistical area 1 geography please refer to the Statistical standard for geographic areas 2018.

The ‘Total unoccupied private dwelling category, which had been overly suppressed for the ‘Dwelling occupancy status’ variable has been corrected in Rev. 7.

Layer ID 104628
Data type Vector multipolygon
Feature count 29889 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Urban Rural 2022 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1647
55
Added
01 Dec 2021

This dataset was first added to Stats NZ Geographic Data Service on 01 Dec 2021.

This dataset is the definitive set of annually released urban rural boundaries for 2022 as defined by Stats NZ. This version contains 722 urban rural features.

The urban rural geography was introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaced the New Zealand Standard Areas Classification (NZSAC92). The urban rural geography replaces the (NZSAC92) urban area geography.

Urban rural is an output geography that classifies New Zealand into areas that share common urban or rural characteristics and is used to disseminate a broad range of Stats NZ’s social, demographic, and economic statistics.

The urban rural indicator complements the urban rural geography and is an attribute in this dataset. Further information on the urban rural indicator is available on the Stats NZ classification and coding tool ARIA.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 106702
Data type Vector multipolygon
Feature count 722 (incl. 4 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 2016 Generalised Version

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

13879
89
Added
07 Dec 2015

This dataset was first added to Stats NZ Geographic Data Service on 07 Dec 2015.

Meshblock 2016 Generalised Version is the definitive set of meshblock boundaries for 2016 as defined by Statistics New Zealand

Layer ID 8413
Data type Vector multipolygon
Feature count 47062 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 41 to 50 of 332