Constituency 2023 Provisional

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

27420
19
Added
23 Jun 2022

This dataset was first added to Stats NZ Geographic Data Service on 23 Jun 2022.

This dataset is the provisional 2023 dataset for Constituency. The final 2023 layer is scheduled to be published on 8 December 2022 as part of the annual boundary release.

The intention of providing this provisional dataset is to make available the boundaries that will be used for the local body elections being held in October 2022.

This dataset is the provisional set of regional council constituency boundaries for 2023 as defined by the regional councils and Local Government Commission but maintained by Stats NZ (the custodian). This version contains 58 constituencies (excluding Area Outside Regional Council Constituency).

Constituencies are established under the Local Electoral Act 2001 and result from the division of a region for electoral purposes.

If a regional council decides to have a Māori constituency, the constituencies within the council are known as _general_constituencies and Māori constituencies.

Constituencies are divisions of regional council areas. They are defined at meshblock level, and do not coincide with the statistical area 1 (SA1) geography or the statistical area 2 (SA2) geography. They are created, based on population, to be the voting areas within councils. Constituencies are required to reflect communities of interest. Their boundaries, so far as is practicable, coincide with those of territorial authorities or wards. The boundaries of constituencies may be reviewed before each three-yearly local government election. Regional councils must review their representation arrangements at least once every six years. The provisions for such reviews are in the Local Government Act 2002.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

Layer ID 109165
Data type Vector multipolygon
Feature count 64
Primary key CON2023_PROV
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Counts of Te Reo speakers of Maori descent by Meshblock

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

16814
168
Added
02 Dec 2015

This dataset was first added to Stats NZ Geographic Data Service on 02 Dec 2015.

This dataset contains counts of people of Maori descent by the official language indicator from the 2013 Census. The data is presented at meshblock level and uses the 2013 Census boundaries. The variables provided are as follows:

  • Number of Maori Descent who speak te reo Maori
  • Number of Maori Descent who do not speak te reo Maori (includes no language)

This dataset allows for the comparison across areas to determine the strength or otherwise of te reo Maori language for people of Maori descent.

Notes:
Confidentiality rules have been applied to all cells in this table, including randomly rounding to base 3.
Unrounded counts of less than 6 have been confidentialised.
Individual figures may not add up to totals, and values for the same data may vary in different tables.
-999 indicates cells have been suppressed for confidentiality reasons

Layer ID 8387
Data type Vector multipolygon
Feature count 46621
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

District Health Board 2015

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

30127
1487
Added
17 Aug 2017

This dataset was first added to Stats NZ Geographic Data Service on 17 Aug 2017.

District health board (DHB) boundaries are defined by the Ministry of Health and are defined at meshblock level using the Stats NZ meshblock geography. They commenced on 1 January 2001 but ceased to exist on 30 June 2022.

From 1 July 2022, Te Whatu Ora/Health New Zealand (www.tewhatuora.govt.nz/) has taken over responsibility for planning and commissioning hospital, primary and community health services.

District Health Boards are responsible for providing or buying Government funded health care services for the population of a specific geographical area. District Health Boards have existed since 1 January 2001. The amalgamation of Otago and Southland into the Southern District Health Board in 2010 reduced the number of District Health Boards from 21 to 20 (excluding 'Area outside District Health Board')

District Health Boards are defined at meshblock level.

Changes to District Health Boards:

Otago and Southland amalgamated to form the Southern District Health Board in 2010.

Chatham Islands Territory meshblocks transferred from Hawke's Bay District Health Board to Canterbury District Health Board in 2015.

Layer ID 87883
Data type Vector multipolygon
Feature count 22
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Estimated Resident Population at 30 June 2018 by Regional Council

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

35240
101
Added
21 Sep 2020

This dataset was first added to Stats NZ Geographic Data Service on 21 Sep 2020.

This dataset contains information on:

· Estimated resident population (ERP) at 30 June 1996, 2001, 2006, 2013, and 2018 for total population

· ERP at 30 June 2018 by ethnic groups (European or Other (including New Zealander), Māori, Pacific, Asian, and Middle Eastern/Latin American/African) – estimates and percentage

· Sex ratio – number of males per 100 females

· ERP at 30 June 2018 by broad age groups and median age

· Geographies available are regional council areas, territorial authority and Auckland local board areas, Statistical Area 2, and urban rural.

Note: The geography corresponds to 2020 boundaries

Note: -999 indicates data are not available.

About the estimated resident population

The estimated resident population at 30 June in the census year is based on the census usually resident population count, with updates for:

· net census undercount (as measured by a post-enumeration survey)

· residents temporarily overseas on census night

· births, deaths and net migration between census night and 30 June

· reconciliation with demographic estimates at the youngest ages.

The estimated resident population is not directly comparable with the census usually resident population count because of these adjustments.

For more detailed information about the methods used to calculate each base population, see DataInfo+ Demographic estimates.

Ethnic groups

It is important to note that these ethnic groups are not mutually exclusive because people can and do identify with more than one ethnicity. People who identify with more than one ethnicity have been included in each ethnic group.

The 'Māori', 'Pacific', 'Asian' and 'Middle Eastern/Latin American/African' ethnic groups are defined in level 1 of the Ethnicity New Zealand Standard Classification 2005. The estimates for the 'European or Other (including New Zealander)' group include people who belong to the 'European' or 'Other ethnicity' groups defined in level 1 of the standard classification. If a person belongs to both the 'European' and 'Other ethnicity' groups they have only been counted once. Almost all people in the 'Other ethnicity' group belong to the 'New Zealander' sub-group.

Time series

This time series is irregular. Because the 2011 Census was cancelled after the Canterbury earthquake on 22 February 2011, the gap between the 2006-base and 2013-base estimated resident population is seven years. The change in data between 2006 and 2013 may be greater than in the usual five-year gap between censuses. Be careful when comparing trends.

Rounding

Individual figures may not sum to stated totals due to rounding.

More information

See Estimated resident population (2018-base): At 30 June 2018 for commentary about the 2018 ERP.

Subnational population estimates concepts – DataInfo+ provides definitions of terms used in the map.

Access more population estimates data in NZ.Stat:

Theme: Population estimates.

Layer ID 105007
Data type Vector multipolygon
Feature count 17
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Estimated Resident Population at 30 June 2018 by Statistical Area 2

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

34497
432
Added
21 Sep 2020

This dataset was first added to Stats NZ Geographic Data Service on 21 Sep 2020.

This dataset contains information on:

· Estimated resident population (ERP) at 30 June 1996, 2001, 2006, 2013, and 2018 for total population

· ERP at 30 June 2018 by ethnic groups (European or Other (including New Zealander), Māori, Pacific, Asian, and Middle Eastern/Latin American/African) – estimates and percentage

· Sex ratio – number of males per 100 females

· ERP at 30 June 2018 by broad age groups and median age

· Geographies available are regional council areas, territorial authority and Auckland local board areas, Statistical Area 2, and urban rural.

Note: The geography corresponds to 2020 boundaries

Note: -999 indicates data are not available.

About the estimated resident population

The estimated resident population at 30 June in the census year is based on the census usually resident population count, with updates for:

· net census undercount (as measured by a post-enumeration survey)

· residents temporarily overseas on census night

· births, deaths and net migration between census night and 30 June

· reconciliation with demographic estimates at the youngest ages.

The estimated resident population is not directly comparable with the census usually resident population count because of these adjustments.

For more detailed information about the methods used to calculate each base population, see DataInfo+ Demographic estimates.

Ethnic groups

It is important to note that these ethnic groups are not mutually exclusive because people can and do identify with more than one ethnicity. People who identify with more than one ethnicity have been included in each ethnic group.

The 'Māori', 'Pacific', 'Asian' and 'Middle Eastern/Latin American/African' ethnic groups are defined in level 1 of the Ethnicity New Zealand Standard Classification 2005. The estimates for the 'European or Other (including New Zealander)' group include people who belong to the 'European' or 'Other ethnicity' groups defined in level 1 of the standard classification. If a person belongs to both the 'European' and 'Other ethnicity' groups they have only been counted once. Almost all people in the 'Other ethnicity' group belong to the 'New Zealander' sub-group.

Time series

This time series is irregular. Because the 2011 Census was cancelled after the Canterbury earthquake on 22 February 2011, the gap between the 2006-base and 2013-base estimated resident population is seven years. The change in data between 2006 and 2013 may be greater than in the usual five-year gap between censuses. Be careful when comparing trends.

Rounding

Individual figures may not sum to stated totals due to rounding.

More information

See Estimated resident population (2018-base): At 30 June 2018 for commentary about the 2018 ERP.

Subnational population estimates concepts – DataInfo+ provides definitions of terms used in the map.

Access more population estimates data in NZ.Stat:

Theme: Population estimates.

Layer ID 105008
Data type Vector multipolygon
Feature count 2173
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Estimated Resident Population at 30 June 2018 by Territorial Authority and Auckland Local Boards

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

36068
184
Added
21 Sep 2020

This dataset was first added to Stats NZ Geographic Data Service on 21 Sep 2020.

This dataset contains information on:

· Estimated resident population (ERP) at 30 June 1996, 2001, 2006, 2013, and 2018 for total population

· ERP at 30 June 2018 by ethnic groups (European or Other (including New Zealander), Māori, Pacific, Asian, and Middle Eastern/Latin American/African) – estimates and percentage

· Sex ratio – number of males per 100 females

· ERP at 30 June 2018 by broad age groups and median age

· Geographies available are regional council areas, territorial authority and Auckland local board areas, Statistical Area 2, and urban rural.

Note: The geography corresponds to 2020 boundaries

Note: -999 indicates data are not available.

About the estimated resident population

The estimated resident population at 30 June in the census year is based on the census usually resident population count, with updates for:

· net census undercount (as measured by a post-enumeration survey)

· residents temporarily overseas on census night

· births, deaths and net migration between census night and 30 June

· reconciliation with demographic estimates at the youngest ages.

The estimated resident population is not directly comparable with the census usually resident population count because of these adjustments.

For more detailed information about the methods used to calculate each base population, see DataInfo+ Demographic estimates.

Ethnic groups

It is important to note that these ethnic groups are not mutually exclusive because people can and do identify with more than one ethnicity. People who identify with more than one ethnicity have been included in each ethnic group.

The 'Māori', 'Pacific', 'Asian' and 'Middle Eastern/Latin American/African' ethnic groups are defined in level 1 of the Ethnicity New Zealand Standard Classification 2005. The estimates for the 'European or Other (including New Zealander)' group include people who belong to the 'European' or 'Other ethnicity' groups defined in level 1 of the standard classification. If a person belongs to both the 'European' and 'Other ethnicity' groups they have only been counted once. Almost all people in the 'Other ethnicity' group belong to the 'New Zealander' sub-group.

Time series

This time series is irregular. Because the 2011 Census was cancelled after the Canterbury earthquake on 22 February 2011, the gap between the 2006-base and 2013-base estimated resident population is seven years. The change in data between 2006 and 2013 may be greater than in the usual five-year gap between censuses. Be careful when comparing trends.

Rounding

Individual figures may not sum to stated totals due to rounding.

More information

See Estimated resident population (2018-base): At 30 June 2018 for commentary about the 2018 ERP.

Subnational population estimates concepts – DataInfo+ provides definitions of terms used in the map.

Access more population estimates data in NZ.Stat:

Theme: Population estimates.

Layer ID 105009
Data type Vector multipolygon
Feature count 88
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Estimated Resident Population at 30 June 2018 by Urban Rural

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

39623
142
Added
21 Sep 2020

This dataset was first added to Stats NZ Geographic Data Service on 21 Sep 2020.

This dataset contains information on:

· Estimated resident population (ERP) at 30 June 1996, 2001, 2006, 2013, and 2018 for total population

· ERP at 30 June 2018 by ethnic groups (European or Other (including New Zealander), Māori, Pacific, Asian, and Middle Eastern/Latin American/African) – estimates and percentage

· Sex ratio – number of males per 100 females

· ERP at 30 June 2018 by broad age groups and median age

· Geographies available are regional council areas, territorial authority and Auckland local board areas, Statistical Area 2, and urban rural.

Note: The geography corresponds to 2020 boundaries

Note: -999 indicates data are not available.

About the estimated resident population

The estimated resident population at 30 June in the census year is based on the census usually resident population count, with updates for:

· net census undercount (as measured by a post-enumeration survey)

· residents temporarily overseas on census night

· births, deaths and net migration between census night and 30 June

· reconciliation with demographic estimates at the youngest ages.

The estimated resident population is not directly comparable with the census usually resident population count because of these adjustments.

For more detailed information about the methods used to calculate each base population, see DataInfo+ Demographic estimates.

Ethnic groups

It is important to note that these ethnic groups are not mutually exclusive because people can and do identify with more than one ethnicity. People who identify with more than one ethnicity have been included in each ethnic group.

The 'Māori', 'Pacific', 'Asian' and 'Middle Eastern/Latin American/African' ethnic groups are defined in level 1 of the Ethnicity New Zealand Standard Classification 2005. The estimates for the 'European or Other (including New Zealander)' group include people who belong to the 'European' or 'Other ethnicity' groups defined in level 1 of the standard classification. If a person belongs to both the 'European' and 'Other ethnicity' groups they have only been counted once. Almost all people in the 'Other ethnicity' group belong to the 'New Zealander' sub-group.

Time series

This time series is irregular. Because the 2011 Census was cancelled after the Canterbury earthquake on 22 February 2011, the gap between the 2006-base and 2013-base estimated resident population is seven years. The change in data between 2006 and 2013 may be greater than in the usual five-year gap between censuses. Be careful when comparing trends.

Rounding

Individual figures may not sum to stated totals due to rounding.

More information

See Estimated resident population (2018-base): At 30 June 2018 for commentary about the 2018 ERP.

Subnational population estimates concepts – DataInfo+ provides definitions of terms used in the map.

Access more population estimates data in NZ.Stat:

Theme: Population estimates.

Layer ID 105010
Data type Vector multipolygon
Feature count 668
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Ethnic group by meshblock (2013 Census)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

17642
362
Added
11 Dec 2015

This dataset was first added to Stats NZ Geographic Data Service on 11 Dec 2015.

2013 Census meshblock dataset contains counts at meshblock levels for selected variables from the 2013 Census. The geographies correspond to 2013 Census boundaries. The counts are at the highest level of each variable’s classification.

Notes:
Confidentiality rules have been applied to all cells in this table, including randomly rounding to base 3.
-999 indicates cells have been suppressed for confidentiality reasons.
-995 indicates cells that could not be calculated.

Layer ID 8448
Data type Vector multipolygon
Feature count 46621
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Functional Urban Area 2018

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7227
145
Added
10 Feb 2021

This dataset was first added to Stats NZ Geographic Data Service on 10 Feb 2021.

The functional urban area (FUA) classification identifies small urban areas and rural areas that are integrated with larger urban areas to create FUAs.

Workplace address and usual residence address data from the 2018 Census of Population and Dwellings were used to identify satellite urban areas (1,000–4,999 residents), and rural statistical area 1s (SA1s) from which at least 40 percent of workers commuted to urban areas with more than 5,000 residents.

An FUA includes Urban rural (UR) 2018 urban areas, rural settlements and rural SA1s where there is: an urban core, one or more secondary urban cores, one or more satellite urban areas, and rural hinterland (rural settlements or rural SA1s).

The FUA indicator (IFUA) classifies UR2018 urban areas and rural SA1s according to their character within their FUA, e.g. urban core, satellite urban area.

The 53 FUAs are classified by population size. The urban core’s population rather than the entire FUA’s population is used to maintain consistency between the descriptions of UR2018 urban area and FUA type (TFUA).

FUAs that have more than 100,000 residents living in their urban core are known as metropolitan areas, while smaller FUAs are divided into large (core population 30,000–99,999), medium (core population 10,000–29,999), and small regional centres (core population 5,000–9,999).

The Greymouth urban area population is less than 10,000 but is classified as a medium regional centre, consistent with its treatment as a medium urban area in the Urban accessibility (UA) 2018 classification.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

For more detail, and classifications, please refer to Ariā.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105288
Data type Vector multipolygon
Feature count 139
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Functional Urban Area 2022 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3761
33
Added
01 Dec 2021

This dataset was first added to Stats NZ Geographic Data Service on 01 Dec 2021.

The functional urban area (FUA) classification identifies small urban areas and rural areas that are integrated with major, large, and medium urban areas to create FUAs.

Workplace address and usual residence address data from the 2018 Census of Population and Dwellings were used to identify satellite urban areas (1,000–4,999 residents), and rural statistical area 1s (SA1s) from which at least 40 percent of workers commuted to urban areas with more than 5,000 residents.

An FUA includes Urban rural (UR) 2018 urban areas, rural settlements and rural SA1s where there is: an urban core, one or more secondary urban cores, one or more satellite urban areas, and rural hinterland (rural settlements or rural SA1s).

The FUA indicator (IFUA) classifies UR2018 urban areas and rural SA1s according to their character within their FUA, e.g., urban core, satellite urban area. The information from the Stats NZ classification can be accessed using the classification tool Ariā.

The 53 FUAs are classified by population size. The urban core’s population rather than the entire FUA’s population is used to maintain consistency between the descriptions of UR2018 urban area and FUA type (TFUA).

FUAs that have more than 100,000 residents living in their urban core are known as metropolitan areas, while smaller FUAs are divided into large (core population 30,000–99,999), medium (core population 10,000–29,999), and small regional centres (core population 5,000–9,999).

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

For more detail, and classifications, please refer to Ariā.

Digital boundary data became freely available on 1 July 2007.

Layer ID 106704
Data type Vector multipolygon
Feature count 139
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 71 to 80 of 374