Estimated Resident Population at 30 June 2018 by Statistical Area 2

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5871
356
Added
21 Sep 2020

This dataset was first added to Stats NZ Geographic Data Service on 21 Sep 2020.

This dataset contains information on:

· Estimated resident population (ERP) at 30 June 1996, 2001, 2006, 2013, and 2018 for total population

· ERP at 30 June 2018 by ethnic groups (European or Other (including New Zealander), Māori, Pacific, Asian, and Middle Eastern/Latin American/African) – estimates and percentage

· Sex ratio – number of males per 100 females

· ERP at 30 June 2018 by broad age groups and median age

· Geographies available are regional council areas, territorial authority and Auckland local board areas, Statistical Area 2, and urban rural.

Note: The geography corresponds to 2020 boundaries

Note: -999 indicates data are not available.

About the estimated resident population

The estimated resident population at 30 June in the census year is based on the census usually resident population count, with updates for:

· net census undercount (as measured by a post-enumeration survey)

· residents temporarily overseas on census night

· births, deaths and net migration between census night and 30 June

· reconciliation with demographic estimates at the youngest ages.

The estimated resident population is not directly comparable with the census usually resident population count because of these adjustments.

For more detailed information about the methods used to calculate each base population, see DataInfo+ Demographic estimates.

Ethnic groups

It is important to note that these ethnic groups are not mutually exclusive because people can and do identify with more than one ethnicity. People who identify with more than one ethnicity have been included in each ethnic group.

The 'Māori', 'Pacific', 'Asian' and 'Middle Eastern/Latin American/African' ethnic groups are defined in level 1 of the Ethnicity New Zealand Standard Classification 2005. The estimates for the 'European or Other (including New Zealander)' group include people who belong to the 'European' or 'Other ethnicity' groups defined in level 1 of the standard classification. If a person belongs to both the 'European' and 'Other ethnicity' groups they have only been counted once. Almost all people in the 'Other ethnicity' group belong to the 'New Zealander' sub-group.

Time series

This time series is irregular. Because the 2011 Census was cancelled after the Canterbury earthquake on 22 February 2011, the gap between the 2006-base and 2013-base estimated resident population is seven years. The change in data between 2006 and 2013 may be greater than in the usual five-year gap between censuses. Be careful when comparing trends.

Rounding

Individual figures may not sum to stated totals due to rounding.

More information

See Estimated resident population (2018-base): At 30 June 2018 for commentary about the 2018 ERP.

Subnational population estimates concepts – DataInfo+ provides definitions of terms used in the map.

Access more population estimates data in NZ.Stat:

Theme: Population estimates.

Layer ID 105008
Data type Vector multipolygon
Feature count 2173
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2020 (Centroid Inside)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6832
40
Updated
30 Jun 2020

This dataset was last updated on Stats NZ Geographic Data Service on 30 Jun 2020.

This dataset contains the inside centroid point layer for the annually released statistical area 2 (SA2) boundaries as at 1 January 2020.The "inside" centroid is a point which always falls inside each SA2 polygon as this is often desirable. The placement of the point is typically in the widest part of the polygon. The algorithms used are proprietary to ESRI and are related to label placement. Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the SA2 geometry. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 104426
Data type Vector point
Feature count 2239
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2020 (Centroid True)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4142
39
Updated
29 Jun 2020

This dataset was last updated on Stats NZ Geographic Data Service on 29 Jun 2020.

This dataset contains the true centroid point layer for the annually released statistical area 2 (SA2) boundaries as at 1 January 2020. The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the location of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the SA2 polygon, depending on the shape of the polygon. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 104420
Data type Vector point
Feature count 2239
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 Higher Geographies 2019 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

10292
78
Updated
29 Jun 2020

This dataset was last updated on Stats NZ Geographic Data Service on 29 Jun 2020.

This dataset is the definitive version of statistical area 2 (SA2) boundaries concorded to higher geographies as at 1 January 2019 as defined by Stats NZ.

This statistical area 2 higher geographies file is a correspondence, or concordance, which relates SA2s to larger geographic areas or 'higher geographies'. The higher geographies contained in this concordance are: territorial authority (TA) and regional council (REGC).

Statistical area 2 was created as part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaces the 1992 New Zealand Standard Areas Classification (NZSAC92). The statistical standard for geographic areas is to be used from 2018 (SSGA18). It defines the Stats NZ input and output geographic classifications and describes their primary purposes, and sets out requirements and guidelines for the creation and maintenance of statistical geographies.

Statistical area 2 (SA2) provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. The SA2 geography aims to reflect communities that interact together socially and economically. In populated areas, SA2s generally contain similar sized populations.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Layer ID 98779
Data type Vector multipolygon
Feature count 2255 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 Higher Geographies 2020 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5767
144
Updated
29 Jun 2020

This dataset was last updated on Stats NZ Geographic Data Service on 29 Jun 2020.

This dataset is the definitive version of annually released statistical area 2 (SA2) boundaries concorded to higher geographies for 2020 as defined by Stats NZ. this version contains 2,255 categories.

This statistical area 2 higher geographies file is a correspondence, or concordance, which relates SA2s to larger geographic areas or 'higher geographies'. The higher geographies contained in this concordance are: territorial authority (TA) and regional council (REGC). For more information on the individual higher geographies, refer to each geography’s metadata.

SA2s were introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA2018) which replaced the New Zealand Standard Areas Classification (NZSAC1992). The SA2 geography replaces the (NZSAC1992) area unit geography.

Names are provided with and without tohutō/macrons, as applicable. Column names for those without macrons are suffixed ‘ascii’. For further information on individual higher geographies, refer to each geography’s metadata.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104275
Data type Vector multipolygon
Feature count 2255 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2020 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5948
189
Updated
28 Jun 2020

This dataset was last updated on Stats NZ Geographic Data Service on 28 Jun 2020.

This dataset contains the annually released statistical area 2 (SA2) boundaries for 2020 as defined by Stats NZ, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 2,173 SA2 categories.

SA2s were introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA2018) which replaced he New Zealand Standard Areas Classification (NZSAC1992). The SA2 geography replaces the (NZSAC1992) area unit geography. This version contains 2,173 SA2s.

SA2 is an output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. The SA2 geography aims to reflect communities that interact together socially and economically. In populated areas, SA2s generally contain similar sized populations.

SA2s are built from SA1s and either define or aggregate to define urban rural areas, territorial authorities, and regional councils. SA2s in city council areas generally have a population of 2,000–4,000 residents while SA2s in district council areas generally have a population of 1,000–3,000 residents. In rural areas, many SA2s have fewer than 1,000 residents because they are in conservation areas or contain sparse populations that cover a large area.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104270
Data type Vector multipolygon
Feature count 2173
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2020 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

26236
1113
Updated
25 Jun 2020

This dataset was last updated on Stats NZ Geographic Data Service on 25 Jun 2020.

This dataset is the definitive set of statistical area 2 (SA2) boundaries for 2020 as defined by Stats NZ. This version contains 2,255 SA2 categories.

SA2s were introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA2018) which replaced the New Zealand Standard Areas Classification (NZSAC1992). The SA2 geography replaces the (NZSAC1992) area unit geography.

SA2 is an output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. The SA2 geography aims to reflect communities that interact together socially and economically. In populated areas, SA2s generally contain similar sized populations.

SA2s are built from SA1s and either define or aggregate to define urban rural areas, territorial authorities, and regional councils. SA2s in city council areas generally have a population of 2,000–4,000 residents while SA2s in district council areas generally have a population of 1,000–3,000 residents. In rural areas, many SA2s have fewer than 1,000 residents because they are in conservation areas or contain sparse populations that cover a large area.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 104271
Data type Vector multipolygon
Feature count 2255 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

2018 Census Dwelling total New Zealand by Statistical Area 1

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5937
485
Updated
16 Jun 2020

This dataset was last updated on Stats NZ Geographic Data Service on 16 Jun 2020.

This dwelling dataset is displayed by statistical area 1 geography and contains information on:

  • Occupied private dwelling type
  • Dwelling record type, for occupied dwellings
  • Occupied non-private dwelling type
  • Number of rooms
  • Number of bedrooms
  • Main types of heating used to heat dwellings (total responses)
  • Fuel types used to heat dwelling (total responses)
  • Dwelling occupancy status
  • Access to basic amenities
  • Dwelling dampness indicator
  • Dwelling mould indicator

This dataset contains counts at statistical area 1 for selected variables from the 2018, 2013, and 2006 censuses. The geography corresponds to 2018 boundaries.

The data uses fixed random rounding to protect confidentiality. Some counts of less than 6 are suppressed according to 2018 confidentiality rules. Values of ‘-999’ indicate suppressed data.

For further information on this dataset please refer to the Statistical area 1 dataset for 2018 Census webpage - footnotes for dwelling, Excel workbooks, and CSV files are available to download. Data quality ratings for 2018 Census variables, summarising the quality rating and priority levels for 2018 Census variables, are available.

For information on the statistical area 1 geography please refer to the Statistical standard for geographic areas 2018.

The ‘Total unoccupied private dwelling category, which had been overly suppressed for the ‘Dwelling occupancy status’ variable has been corrected in Rev. 7.

Layer ID 104628
Data type Vector multipolygon
Feature count 29889 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

2018 Census Household total New Zealand by Statistical Area 1

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5038
392
Updated
21 May 2020

This dataset was last updated on Stats NZ Geographic Data Service on 21 May 2020.

This household dataset is displayed by statistical area 1 geography and contains information on:

• Total households

• Tenure of household

• Sector of landlord

• Weekly rent paid by household, including median weekly rent paid by household

• Number of motor vehicles

• Access to telecommunication systems (total responses)

This dataset contains counts at statistical area 1 for selected variables from the 2018, 2013, and 2006 censuses. The geography corresponds to 2018 boundaries.

The data uses fixed random rounding to protect confidentiality. Some counts of less than 6 are suppressed according to 2018 confidentiality rules. Values of ‘-999’ indicate suppressed data, and values of ‘-997’ indicate data not collected.

For further information on this dataset please refer to the Statistical area 1 dataset for 2018 Census webpage - footnotes for household, Excel workbooks, and CSV files are available to download. Data quality ratings for 2018 Census variables, summarising the quality rating and priority levels for 2018 Census variables, are available.

For information on the statistical area 1 geography please refer to the Statistical standard for geographic areas 2018.

Layer ID 104611
Data type Vector multipolygon
Feature count 29889 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

2018 Census Individual (part 1) total New Zealand by Statistical Area 1

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

14873
1326
Added
17 May 2020

This dataset was first added to Stats NZ Geographic Data Service on 17 May 2020.

This individual (part 1) dataset is displayed by statistical area 1 geography and contains information on:

• Census usually resident population count

• Census night population count

• Unit record data source

• Sex

• Age in five-year groups, including median age

• Age in broad groups

• Age in five-year groups by sex, including median age

• Years at usual residence

• Usual residence five years ago (2013) indicator

• Usual residence one year ago (2017) indicator

• Birthplace

• Birthplace (broad geographic areas) excluding at SA1

• Years since arrival in New Zealand, for the overseas-born

• Ethnic group (grouped total responses)

• Six languages (total responses)

• Māori descent

This dataset contains counts at statistical area 1 for selected variables from the 2018, 2013, and 2006 censuses. The geography corresponds to 2018 boundaries.

The data uses fixed random rounding to protect confidentiality. Some counts of less than 6 are suppressed according to 2018 confidentiality rules. Values of ‘-999’ indicate suppressed data, values of ‘-998’ refer to data not available at SA1 (refer to Birthplace for lower geographic breakdowns).

For further information on this dataset please refer to the Statistical area 1 dataset for 2018 Census webpage - footnotes for individual part 1, Excel workbooks, and CSV files are available to download. Data quality ratings for 2018 Census variables, summarising the quality rating and priority levels for 2018 Census variables, are available.

For information on the statistical area 1 geography please refer to the Statistical standard for geographic areas 2018.

Layer ID 104612
Data type Vector multipolygon
Feature count 29889 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 161 to 170 of 332