2018 Census Main means of travel to work by Statistical Area 2

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1334
580
Added
14 Jun 2020

This dataset was first added to Stats NZ Geographic Data Service on 14 Jun 2020.

The 2018 Census commuter view dataset contains the employed census usually resident population count aged 15 years and over by statistical area 2 for the main means of travel to work variable from the 2018 Census. The geography corresponds to 2018 boundaries.

This dataset is the base data for the ‘There and back again: our daily commute’ competition.

This 2018 Census commuter view dataset is displayed by statistical area 2 geography and contains from-to (journey) information on an individual's usual residence and workplace address* by main means of travel to work.

* Workplace address is coded from information supplied by respondents about their workplaces. Where respondents do not supply sufficient information, their responses are coded to ‘not further defined’. The 2018 Census commuter view datasets excludes these ‘not further defined’ areas, as such the sum of the counts for each region in this dataset may not be equal to the total employed census usually resident population count aged 15 years and over for that region.

It is recommended that this dataset be downloaded as either a CSV or a file geodatabase.

This dataset can be used in conjunction with the following spatial files by joining on the statistical area 2 code values:

· Statistical Area 2 2018 (generalised)

· Statistical Area 2 2018 (Centroid Inside)

The data uses fixed random rounding to protect confidentiality. Counts of less than 6 are suppressed according to 2018 confidentiality rules. Values of -999 indicate suppressed data.

Data quality ratings for 2018 Census variables, summarising the quality rating and priority levels for 2018 Census variables, are available.

For information on the statistical area 2 geography please refer to the Statistical standard for geographic areas 2018.

Table ID 104720
Data type Table
Row count 50870
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

2018 Census Main means of travel to education by Statistical Area 2

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

936
455
Added
14 Jun 2020

This dataset was first added to Stats NZ Geographic Data Service on 14 Jun 2020.

The 2018 Census commuter view dataset contains the census usually resident population count who are studying (part time or full time), by statistical area 2 for the main means of travel to education variable from the 2018 Census. The geography corresponds to 2018 boundaries.

This dataset is the base data for the ‘There and back again: our daily commute’ competition.

This 2018 Census commuter view dataset is displayed by statistical area 2 geography and contains from-to (journey) on an individual’s usual residence and educational institution address* by main means of travel to education.

* Educational institution address is coded from information supplied by respondents about where they study. Where respondents do not supply sufficient information, their responses are coded to ‘not further defined’. The 2018 Census commuter view datasets excludes these ‘not further defined’ areas, as such the sum of the counts for each region in this dataset may not be equal to the total employed census usually resident population count aged 15 years and over for that region.

It is recommended that this dataset be downloaded as either a CSV or a file geodatabase.

This dataset can be used in conjunction with the following spatial files by joining on the statistical area 2 code values:

· Statistical Area 2 2018 (generalised)

· Statistical Area 2 2018 (Centroid Inside)

The data uses fixed random rounding to protect confidentiality. Counts of less than 6 are suppressed according to 2018 confidentiality rules. Values of -999 indicate suppressed data..

Data quality ratings for 2018 Census variables, summarising the quality rating and priority levels for 2018 Census variables, are available.

For information on the statistical area 2 geography please refer to the Statistical standard for geographic areas 2018.

Table ID 104721
Data type Table
Row count 22430
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Geographic Areas File 2013

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

0
0
Added
26 May 2020

This dataset was first added to Stats NZ Geographic Data Service on 26 May 2020.

The geographic areas file 2013 is a downloadable csv file that classifies meshblocks into larger geographic areas, such as area units, territorial authorities, and regional councils. You can use this areas file, also known as a concordance file, to see how the various geographic boundaries link together.

For each meshblock, there is a series of codes that link to any meshblock-defined geographic area. All areas are set as at 1 January of the specified year. Concordance files are available from different years, to enable data for the same area classification to be compared over time.

The areas files can be used in conjunction with the geographic boundary files available on Stats NZ's Geographic Data Service.

Table ID 104685
Data type Table
Row count 46637
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Geographic Areas File 2016

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

0
0
Added
26 May 2020

This dataset was first added to Stats NZ Geographic Data Service on 26 May 2020.

The geographic areas file 2016 is a downloadable csv file that classifies meshblocks into larger geographic areas, such as area units, territorial authorities, and regional councils. You can use this areas file, also known as a concordance file, to see how the various geographic boundaries link together.

For each meshblock, there is a series of codes that link to any meshblock-defined geographic area. All areas are set as at 1 January of the specified year. Concordance files are available from different years, to enable data for the same area classification to be compared over time.

The areas files can be used in conjunction with the geographic boundary files available on Stats NZ's Geographic Data Service.

Table ID 104684
Data type Table
Row count 47062
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Geographic Areas File 2018

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

0
0
Added
24 May 2020

This dataset was first added to Stats NZ Geographic Data Service on 24 May 2020.

The geographic areas file 2018 is a downloadable csv file that classifies meshblocks into larger geographic areas, such as statistical area 2s, territorial authorities, and regional councils. You can use this areas file, also known as a concordance file, to see how the various geographic boundaries link together.

For each meshblock, there is a series of codes that link to any meshblock-defined geographic area. All areas are set as at 1 January of the specified year. Concordance files are available from different years, to enable data for the same area classification to be compared over time.

The areas files can be used in conjunction with the geographic boundary files available on Stats NZ's Geographic Data Service.

Table ID 104680
Data type Table
Row count 53589
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Geographic Areas File 2017

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1137
17
Added
25 May 2020

This dataset was first added to Stats NZ Geographic Data Service on 25 May 2020.

The geographic areas file 2017 is a downloadable csv file that classifies meshblocks into larger geographic areas, such as area units, territorial authorities, and regional councils. You can use this areas file, also known as a concordance file, to see how the various geographic boundaries link together.

For each meshblock, there is a series of codes that link to any meshblock-defined geographic area. All areas are set as at 1 January of the specified year. Concordance files are available from different years, to enable data for the same area classification to be compared over time.

The areas files can be used in conjunction with the geographic boundary files available on Stats NZ's Geographic Data Service.

Table ID 104681
Data type Table
Row count 50613
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Geographic Areas File 2020

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2127
251
Updated
12 May 2020

This dataset was last updated on Stats NZ Geographic Data Service on 12 May 2020.

The geographic areas file 2020 is a downloadable csv file that classifies meshblocks into larger geographic areas, such as statistical area 2s, territorial authorities, and regional councils. You can use the area files, which are also known as concordance files, to see how the various geographic boundaries link together.

For each meshblock, there is a series of codes that link to any meshblock-defined geographic area. All areas are set as at 1 January of the specified year. Concordance files are available from different years, to enable data for the same area classification to be compared over time.

The areas files can be used in conjunction with the geographic boundary files available on Stats NZ's Geographic Data Service.

For earlier geographic area files refer to the Geographic area files on the Stats NZ website.

From 2020 onwards, names are provided with and without tohutō/macrons, as applicable. Where a descriptor column has a macron, the corresponding column name without a macron is suffixed with ‘ascii’.

The geographic areas file 2020 was released prior to the setting of the general electorate 2020 (GED2020) and Māori electorate 2020 (MED2020) boundaries and therefore does not contain these. A GED2020 and MED2020 correspondence to meshblock is available here: datafinder.stats.govt.nz/data/category/electorates...

Table ID 104285
Data type Table
Row count 53596
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Geographic Areas File 2019

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7349
419
Updated
12 May 2020

This dataset was last updated on Stats NZ Geographic Data Service on 12 May 2020.

This page contains an areas file for 2019 geographic areas.

Area files are text files that classify meshblocks into larger geographic areas, such as statistical area 2s, territorial authorities, and regional councils. You can use the area files, which are also known as concordance files, to map the types of digital boundaries (see Examples of geographic boundary layers) within the geographic hierarchy, to see how the various geographic boundaries link together.

For each meshblock, there is a series of codes that link to any meshblock-defined geographic area. All areas are set as at 1 January of the specified year. Concordance files are available from different years, to enable data for the same area classification to be compared over time.

The areas files can be used in conjunction with the geographic boundary files available on Stats NZ's Geographic Data Service. For earlier files refer to Geographic area files.

Table ID 98778
Data type Table
Row count 53596
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

2018 Census individual part 3a total NZ by statistical area 1 (2018 Census only) lookup table

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

792
30
Added
07 Apr 2020

This dataset was first added to Stats NZ Geographic Data Service on 07 Apr 2020.

This lookup table refers to the web service 2018 Census individual part 3a data by SA1.
The web service contains data from the 2018 Census only, no data from previous censuses has been included.

The individual (part 3a) dataset is displayed by statistical area 1 geography and contains information on:
• Work and labour force status
• Status in employment
• Occupation – major group, by usual residence address
• Occupation – major group, by workplace address (1)
• Industry (division), by usual residence address
• Industry (division), by workplace address (1)

(1) Workplace address is coded from information supplied by respondents about their workplaces. Where respondents do not supply sufficient information, their responses are coded to ‘not further defined’. The statistical area 1 dataset for 2018 Census excludes these ‘not further defined’ areas.

The data uses fixed random rounding to protect confidentiality. Some counts of less than 6 are suppressed according to 2018 confidentiality rules. Values of ‘-999’ indicate suppressed data, and values of ‘Null’ indicate data not collected.

For further information on this dataset please refer to the Statistical area 1 dataset for 2018 Census webpage - footnotes for individual part 3a, Excel workbooks, and CSV files are available to download. Data quality ratings for 2018 Census variables, summarising the quality rating and priority levels for 2018 Census variables, are available.

For information on the statistical area 1 geography please refer to the Statistical standard for geographic areas 2018.

Table ID 104572
Data type Table
Row count 85
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

2018 Census dwelling total NZ by statistical area 1 (2018 Census only) lookup table

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

10
0
Added
07 Apr 2020

This dataset was first added to Stats NZ Geographic Data Service on 07 Apr 2020.

This lookup table relates to the web service 2018 Census dwelling data by SA1.
The web service contains data from the 2018 Census only, no data from previous censuses has been included.

The dwelling dataset is displayed by statistical area 1 geography and contains information on:
• Occupied private dwelling type
• Dwelling record type, for occupied dwellings
• Occupied non-private dwelling type
• Number of rooms
• Number of bedrooms
• Main types of heating used to heat dwellings (total responses)
• Fuel types used to heat dwelling (total responses)
• Dwelling occupancy status
• Access to basic amenities
• Dwelling dampness indicator
• Dwelling mould indicator

The data uses fixed random rounding to protect confidentiality. Some counts of less than 6 are suppressed according to 2018 confidentiality rules. Values of ‘-999’ indicate suppressed data, and values of ‘Null’ indicate data not collected.

For further information on this dataset please refer to the Statistical area 1 dataset for 2018 Census webpage - footnotes for dwelling, Excel workbooks, and CSV files are available to download. Data quality ratings for 2018 Census variables, summarising the quality rating and priority levels for 2018 Census variables, are available.

For information on the statistical area 1 geography please refer to the Statistical standard for geographic areas 2018.

Table ID 104566
Data type Table
Row count 90
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 18