Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to Stats NZ Geographic Data Service on 11 Jan 2018.
MB2018_V1_00_Centroid_True is the true centroid point layer for the major released version of the annually released meshblock boundaries for 2018. The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the locations of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the meshblock polygon, depending on the shape of the polygon. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection. Non-digitised meshblocks cannot have a centroid.
Layer ID | 93612 |
---|---|
Data type | Vector point | Feature count | 53573 |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 3.0 New Zealand
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to Stats NZ Geographic Data Service on 20 Oct 2016.
This is the release of the annually released meshblock pattern as at 1 January 2013. This dataset is the definitive set of meshblock boundaries for 2003 as defined by Statistics New Zealand.
Statistics New Zealand maintains an annual meshblock pattern for the collection and production of statistical data, allowing data to be compared over time. A meshblock is the smallest geographic unit for which statistical data is collected and processed by Statistics New Zealand. A meshblock is defined by a geographic area, which can vary in size from part of a city block to a large area of rural land. Each meshblock abuts against another to form a network covering all of New Zealand, including coasts and inlets and extending out to the 200 mile economic zone. Meshblocks are added together to build up larger geographic areas such as area units and urban areas. They are also used to define electoral districts, territorial authorities and regional councils.
Layer ID | 25747 |
---|---|
Data type | Vector multipolygon | Feature count | 46637 (incl. 16 with empty or null geometries) |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 3.0 New Zealand
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to Stats NZ Geographic Data Service on 07 Dec 2015.
Territorial Authority 2016 Generalised Version is the definitive set of territorial authority boundaries for 2016 as defined by the Local Government Commission and/or the territorial authorities themselves but maintained by Statistics New Zealand (the custodian). A territorial authority is defined under the Local Government Act 2002 as a city or a district council.
Layer ID | 8409 |
---|---|
Data type | Vector multipolygon | Feature count | 68 |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on Stats NZ Geographic Data Service on 17 May 2018.
Statistical Area 2 2018 (Centroid True) is the true centroid point layer for the major released version of the annually released statistical area 2 (SA2) boundaries for 2018. The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the location of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the SA2 polygon, depending on the shape of the polygon.The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection. Non-digitised meshblocks cannot have a centroid.
Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.
Layer ID | 93620 |
---|---|
Data type | Vector point | Feature count | 2237 |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 3.0 New Zealand
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to Stats NZ Geographic Data Service on 26 Jul 2017.
This is the definitive set of regional council boundaries for 2015 as defined by the Local Government Commission and/or regional councils themselves but maintained by Statistics New Zealand (the custodian) as at 1 January 2006.
The regional council is the top tier of local government in New Zealand. There are 16 regional councils in New Zealand (defined by Part 1 of Schedule 2 of the Local Government Act 2002). Eleven are governed by an elected regional council, while five are governed by territorial authorities (the second tier of local government) who also perform the functions of a regional council and are known as unitary authorities. These unitary authorities are Nelson City Council, and Gisborne, Tasman, and Marlborough District Councils. The Chatham Islands Council also performs some of the functions of a regional council, but is not strictly a unitary authority. Unitary authorities act as regional councils for the purposes of a wide range of legislative purposes. Regional councils are responsible for the administration of many environmental and transport matters such as land transport planning and harbour navigation and safety.
Regional Councils were established in 1989 after the abolition of the 22 local government regions. The Local Government Act 2002 requires the boundaries of regions to conform, as far as possible, to one or more water catchments. When determining regional boundaries, the Local Government Commission gave consideration to regional communities of interest when selecting which water catchments to include in a region. It also considered factors such as natural resource management, land use planning and environmental matters. Some regional council boundaries are coterminous with territorial authority boundaries but there are several exceptions. An example is Taupo District, which is geographically split between four regions, although most of its area falls within the Waikato Region. Where territorial local authorities straddle regional council boundaries, the affected area is statistically defined by complete area units. In general, however, regional councils contain complete territorial authorities.
The seaward boundary of any coastal regional council is the twelve mile New Zealand territorial limit.
Layer ID | 87753 |
---|---|
Data type | Vector multipolygon | Feature count | 17 |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on Stats NZ Geographic Data Service on 03 May 2019.
This dataset is the definitive set of statistical area 2 (SA2) boundaries at 1 January 2019 as defined by Stats NZ. SA2 is a new output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. SA2s are defined at SA1 and meshblock levels.
Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.
For further information see ANZLIC Metadata 2019 Statistical Area 2 attachment below or link to the StatsNZ Classification System Aria.
Layer ID | 98970 |
---|---|
Data type | Vector multipolygon | Feature count | 2255 (incl. 16 with empty or null geometries) |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.
This dataset is the definitive set of ward boundaries 1 January 2018 as defined by the territorial authorities and/or Local Government Commission, and maintained by Stats NZ.Wards are defined under the Local Electoral Act 2001 and result from dividing a territorial authority for electoral purposes. Wards are defined at meshblock level.
Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.
For further information see ANZLIC Metadata 2018 Ward attachment below.
Layer ID | 92221 |
---|---|
Data type | Vector multipolygon | Feature count | 245 |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 3.0 New Zealand
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to Stats NZ Geographic Data Service on 07 Dec 2015.
Meshblock 2016 Generalised Version is the definitive set of meshblock boundaries for 2016 as defined by Statistics New Zealand
Layer ID | 8413 |
---|---|
Data type | Vector multipolygon | Feature count | 47062 (incl. 16 with empty or null geometries) |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 3.0 New Zealand
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to Stats NZ Geographic Data Service on 07 Dec 2015.
Regional Council 2016 Generalised Version is the definitive set of regional council boundaries for 2016 as defined by the Local Government Commission and/or regional councils themselves but maintained by Statistics New Zealand (the custodian).
Layer ID | 8405 |
---|---|
Data type | Vector multipolygon | Feature count | 17 |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.
This dataset is the definitive set of annually released territorial authority boundaries at 1 January 2018, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. A territorial authority is defined under the Local Government Act 2002 as a city or a district council. Territorial authorities are the second tier of local government in New Zealand, below regional councils.
Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.
For further information see ANZLIC Metadata 2018 Territorial Authority attachment below.
Layer ID | 92215 |
---|---|
Data type | Vector multipolygon | Feature count | 68 |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |