2018 Layers

This dataset is the definitive set of annually released meshblock boundaries at 1 January 2018. Stats NZ maintains an annual meshblock geography for collecting and producing statistical data. This allows data to be compared over time. A meshblock is the smallest geographic unit for which statistical data is collected and processed by Stats NZ. A meshblock is defined by a geographic area, which can vary in size from part of a city block to a large area of rural land. Each meshblock borders on another to form a network covering all of New Zealand, including coasts and inlets and extending out to the 200-mile economic zone. Meshblocks are added together to build up larger geographic areas such as statistical area 1 (SA1), statistical area 2 (SA2), and urban rural. They are also used to define electoral districts, territorial authorities, and regional councils. The digital geographic boundaries are defined and maintained by Stats NZ. Meshblocks cover the land area of New Zealand, the water area to the 12-mile limit, the Chatham Islands, Kermadec Islands, sub-Antarctic islands, off-shore oil rigs, and Ross Dependency.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

There are 16 meshblocks not held in digitised form.

For further information see ANZLIC Metadata 2018 Meshblock attachment below.

This dataset is the definitive set of annually released territorial authority boundaries at 1 January 2018 as defined by the territorial authorities and/or Local Government Commission, and maintained by Stats NZ. A territorial authority is defined under the Local Government Act 2002 as a city or a district council. Territorial authorities are the second tier of local government in New Zealand, below regional councils.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Territorial Authority attachment below.

This dataset is the definitive set of statistical area 2 (SA2) boundaries at 1 January 2018 as defined by Stats NZ. SA2 is a new output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. SA2s are defined at SA1 and meshblock levels. Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes. For further information see ANZLIC Metadata 2018 Statistical Area 2 attachment below or link to the StatsNZ Classification System Aria.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

This dataset is the definitive set of urban rural boundaries at 1 January 2018 as defined by Stats NZ. Urban rural is a new output geography that classifies New Zealand into areas that share common urban or rural characteristics. Urban areas are built from the Statistical Area 2 geography, while rural and water areas are built from the Statistical Area 1 geography. Urban areas are statistically defined areas with no administrative or legal basis. The urban rural indicator is an attribute of this classification and provides additional information about a location's urban or rural nature.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Urban Rural or ANZLIC Metadata 2018 Urban Rural Indicator attachments below.

This dataset is a high definition (HD) version of the annually released meshblock boundaries at 1 January 2018. This HD version is the most detailed geometry, suitable for use in GIS for geometric analysis operations and for the computation of areas, centroids and other metrics. The HD version is aligned to the LINZ cadastre. Stats NZ maintains an annual meshblock geography for collecting and producing statistical data. This allows data to be compared over time. A meshblock is the smallest geographic unit for which statistical data is collected and processed by Stats NZ. A meshblock is defined by a geographic area, which can vary in size from part of a city block to a large area of rural land. Each meshblock borders on another to form a network covering all of New Zealand, including coasts and inlets and extending out to the 200-mile economic zone. Meshblocks are added together to build up larger geographic areas such as statistical area 1 (SA1), statistical area 2 (SA2), and urban rural. They are also used to define electoral districts, territorial authorities, and regional councils. The digital geographic boundaries are defined and maintained by Stats NZ. Meshblocks cover the land area of New Zealand, the water area to the 12-mile limit, the Chatham Islands, Kermadec Islands, sub-Antarctic islands, off-shore oil rigs, and Ross Dependency.

Digital boundary data became freely available on 1 July 2007.

There are 16 meshblocks not held in digitised form.

For further information see ANZLIC Metadata 2018 Meshblock attachment below.

Statistical Area 2 2018 (Centroid Inside) is the inside centroid point layer for the major released version of the annually released statistical area 2 (SA2) boundaries for 2018.
The "inside" centroid is a point which always falls inside each SA2 polygon as this is often desirable in some users cases. The placement of the point is typically in the widest part of the polygon. The algorithms used are proprietary to ESRI and are related to label placement. Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the Meshblock geometry. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

MB2018_V1_00_Centroid_True is the true centroid point layer for the major released version of the annually released meshblock boundaries for 2018. The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the locations of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the meshblock polygon, depending on the shape of the polygon. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection. Non-digitised meshblocks cannot have a centroid.

Statistical Area 2 2018 (Centroid True) is the true centroid point layer for the major released version of the annually released statistical area 2 (SA2) boundaries for 2018. The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the location of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the SA2 polygon, depending on the shape of the polygon.The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection. Non-digitised meshblocks cannot have a centroid.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

This dataset is the definitive set of ward boundaries 1 January 2018 as defined by the territorial authorities and/or Local Government Commission, and maintained by Stats NZ.Wards are defined under the Local Electoral Act 2001 and result from dividing a territorial authority for electoral purposes. Wards are defined at meshblock level.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Ward attachment below.

This dataset is the definitive set of annually released territorial authority boundaries at 1 January 2018, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. A territorial authority is defined under the Local Government Act 2002 as a city or a district council. Territorial authorities are the second tier of local government in New Zealand, below regional councils.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Territorial Authority attachment below.