Meshblock 2021 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1057
31
Added
09 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 09 Dec 2020.

This dataset is the definitive set of annually released meshblock boundaries for 2021 as defined by Stats NZ. This version contains 53,598 meshblocks, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries.

Stats NZ maintains an annual meshblock geography for collecting and producing statistical data. This allows data to be compared over time. A meshblock is the smallest geographic unit for which statistical data is collected and processed by Stats NZ. A meshblock is defined by a geographic area, which can vary in size from part of a city block to a large area of rural land. Each meshblock borders on another to form a network covering all of New Zealand, including coasts and inlets and extending out to the 200-mile economic zone. Meshblocks are added together to build up larger geographic areas such as statistical area 1 (SA1), statistical area 2 (SA2), and urban rural. They are also used to define electoral districts, territorial authorities, and regional councils.

The following 16 meshblocks are outside the 12 mile limit and are not held in digitised form: 0016901, 0016902, 1588000, 3166401, 3166402, 3166600, 3166710, 3166711, 3195000, 3196001, 3196002, 3196003, 3196004, 3196005, 3196006, 3196007.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

The meshblock classification can also be downloaded from the Stats NZ classification and concordance tool Ariā.

Layer ID 105184
Data type Vector multipolygon
Feature count 52930
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Territorial Authority 2021 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1006
50
Added
06 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 06 Dec 2020.

This dataset is the definitive set of annually released territorial authority boundaries for 2021 as defined the territorial authorities and/or Local Government Commission and maintained by Stats NZ (the custodian). This version contains 68 categories.

A territorial authority is defined under the Local Government Act 2002 as a city or a district council. There are 67 territorial authorities in New Zealand. Some territorial authority boundaries are coterminous with regional council boundaries but there are several exceptions. An example is Taupo District, which is split between four regions, although most of its area falls within the Waikato Region. Territorial authorities are defined at meshblock, statistical area 1 (SA1) and statistical area 2 (SA2) levels.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105153
Data type Vector multipolygon
Feature count 68
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Territorial Authority Local Board 2021 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

913
50
Added
01 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 01 Dec 2020.

This dataset is derived from the definitive versions of local boards for Auckland and territorial authorities for the rest of New Zealand, as defined by the territorial authorities and/or Local Government Commission and maintained by Stats NZ (the custodian), clipped to the coastline.

This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 21 local boards in the Auckland Council and 66 territorial authority boundaries for the rest New Zealand.

For statistical outputs that use territorial authorities to aggregate and report data Auckland Council is treated as a single geographic entity. This can hide meaningful patterns and trends for a significant portion of the population. A solution was to create a new classification of territorial authorities that includes the local boards for Auckland. The Auckland Council was established in 2010 under the Local Government (Tamaki Makaurau Reorganisation) Act 2009. Seven territorial authorities within the Auckland Region were abolished and replaced by the unitary authority Auckland Council. Local boards fall within the community board classification.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105136
Data type Vector multipolygon
Feature count 88
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 2021 (Centroid True)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

791
5
Added
07 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 07 Dec 2020.

This dataset contains the true centroid point layer for the annually released meshblock boundaries as at 1 January 2021. The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid.

The centroid is a useful way of summarizing the locations of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the meshblock polygon, depending on the shape of the polygon.

The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.Non-digitised meshblocks cannot have a centroid.

Layer ID 105167
Data type Vector point
Feature count 53582
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 2021 (Centroid True)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

775
4
Added
07 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 07 Dec 2020.

This dataset contains the true centroid point layer for the annually released statistical area 1 (SA1) boundaries as at 1 January 2021. The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the location of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the SA1 polygon, depending on the shape of the polygon.The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 105166
Data type Vector point
Feature count 29894
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 Higher Geographies 2021 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

620
27
Updated
13 Jan 2021

This dataset was last updated on Stats NZ Geographic Data Service on 13 Jan 2021.

This dataset is the definitive set of annually released statistical area 1 (SA1) boundaries concorded to higher geographies for 2021 as defined by Stats NZ. This version contains 29,910 SA1s including 16 with empty or null geometries (non-digitised SA1s).

This SA1 higher geographies 2021 file is a correspondence, or concordance, which relates SA1s to larger geographic areas or 'higher geographies'. The higher geographies contained in this concordance are: regional council (REGC2021), statistical area 2 (SA22021), territorial authority (TA2021), urban rural (UR2021), urban rural indicator (IUR2021), and urban accessibility indicator (IUA2021). The following geographies were introduced in 2018: statistical area 1 (SA1), statistical area 2 (SA2), urban rural (UR), and urban rural indicator (IUR) as part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaced the 1992 New Zealand Standard Areas Classification (NZSAC92). The urban accessibility indicator (IUA), which measures the degree of urban influence New Zealand's urban areas have on surrounding rural areas, was first added to this correspondence in 2021.

Higher geography names are provided with and without tohutō/macrons, as applicable. Column names for those without macrons are suffixed ‘ascii’. For further information on individual higher geographies, refer to each geography’s metadata.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105177
Data type Vector multipolygon
Feature count 29910 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2021 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

556
22
Updated
13 Jan 2021

This dataset was last updated on Stats NZ Geographic Data Service on 13 Jan 2021.

This dataset is the definitive set of statistical area 2 (SA2) boundaries for 2021 as defined by Stats NZ. This version contains 2,259 SA2 categories.

SA2s were introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA2018) which replaced the New Zealand Standard Areas Classification (NZSAC1992). The SA2 geography replaces the (NZSAC1992) area unit geography.

SA2 is an output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. The SA2 geography aims to reflect communities that interact together socially and economically. In populated areas, SA2s generally contain similar sized populations.

SA2s are built from SA1s and either define or aggregate to define urban rural areas, territorial authorities, and regional councils. SA2s in city council areas generally have a population of 2,000–4,000 residents while SA2s in district council areas generally have a population of 1,000–3,000 residents. In rural areas, many SA2s have fewer than 1,000 residents because they are in conservation areas or contain sparse populations that cover a large area.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105175
Data type Vector multipolygon
Feature count 2259 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2021 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

465
15
Updated
13 Jan 2021

This dataset was last updated on Stats NZ Geographic Data Service on 13 Jan 2021.

This dataset contains the annually released statistical area 2 (SA2) boundaries for 2021 as defined by Stats NZ, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 2,176 SA2 categories.

SA2s were introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA2018) which replaced he New Zealand Standard Areas Classification (NZSAC1992). The SA2 geography replaces the (NZSAC1992) area unit geography.

SA2 is an output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. The SA2 geography aims to reflect communities that interact together socially and economically. In populated areas, SA2s generally contain similar sized populations.

SA2s are built from SA1s and either define or aggregate to define urban rural areas, territorial authorities, and regional councils. SA2s in city council areas generally have a population of 2,000–4,000 residents while SA2s in district council areas generally have a population of 1,000–3,000 residents. In rural areas, many SA2s have fewer than 1,000 residents because they are in conservation areas or contain sparse populations that cover a large area.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105161
Data type Vector multipolygon
Feature count 2176
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Ward 2021 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

471
14
Updated
14 Jan 2021

This dataset was last updated on Stats NZ Geographic Data Service on 14 Jan 2021.

This dataset is the definitive set of annually released ward boundaries for 2021 as defined by the territorial authorities and/or Local Government Commission, and maintained by Stats NZ (the custodian). This version contains 239 categories.

Wards were originally set up within any territorial authority with a population of at least 20,000. Wards are defined under the Local Electoral Act 2001 and result from dividing a territorial authority for electoral purposes. The ward system was designed to allow for the recognition of communities within a territorial authority and to increase community involvement in the local government system.Territorial authorities can now choose whether they would like to maintain electoral wards. As a result, the number of wards has steadily decreased since they were first created in 1989. Ward boundaries are reviewed in the year before the three-yearly local government elections.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105140
Data type Vector multipolygon
Feature count 239
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Ward 2021 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

457
10
Updated
14 Jan 2021

This dataset was last updated on Stats NZ Geographic Data Service on 14 Jan 2021.

This dataset contains the annually released ward boundaries for 2021 as defined by the territorial authorities and/or Local Government Commission, and maintained by Stats NZ (the custodian), clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 239 categories.

Wards were originally set up within any territorial authority with a population of at least 20,000. Wards are defined under the Local Electoral Act 2001 and result from dividing a territorial authority for electoral purposes. The ward system was designed to allow for the recognition of communities within a territorial authority and to increase community involvement in the local government system.Territorial authorities can now choose whether they would like to maintain electoral wards. As a result, the number of wards has steadily decreased since they were first created in 1989. Ward boundaries are reviewed in the year before the three-yearly local government elections.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105146
Data type Vector multipolygon
Feature count 239
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 36