Ward 2019 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4974
126
Updated
05 May 2019

This dataset was last updated on Stats NZ Geographic Data Service on 05 May 2019.

This dataset is the major released version of the annually released ward boundaries at 1 January 2019, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and does not fully represent the official full extent boundaries. Wards are defined under the Local Electoral Act 2001 and result from dividing a territorial authority for electoral purposes. Wards are defined at meshblock level.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2019 Ward attachment below.

Layer ID 98740
Data type Vector multipolygon
Feature count 245
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 1996 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5802
25
Added
02 Aug 2018

This dataset was first added to Stats NZ Geographic Data Service on 02 Aug 2018.

This dataset is the definitive set of annually released meshblock boundaries at 1 January 1996. Stats NZ maintains an annual meshblock geography for collecting and producing statistical data. This allows data to be compared over time. A meshblock is the smallest geographic unit for which statistical data is collected and processed by Stats NZ. A meshblock is defined by a geographic area, which can vary in size from part of a city block to a large area of rural land. Each meshblock borders on another to form a network covering all of New Zealand, including coasts and inlets and extending out to the 200-mile economic zone.. Meshblocks are added together to build up larger geographic areas such as area units and urban areas. They are also used to define electoral districts, territorial authorities and regional councils.

Layer ID 95637
Data type Vector multipolygon
Feature count 36794 (incl. 7 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 1991 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5738
36
Added
02 Aug 2018

This dataset was first added to Stats NZ Geographic Data Service on 02 Aug 2018.

This dataset is the definitive set of annually released meshblock boundaries at 1 January 1991. Stats NZ maintains an annual meshblock geography for collecting and producing statistical data. This allows data to be compared over time. A meshblock is the smallest geographic unit for which statistical data is collected and processed by Stats NZ. A meshblock is defined by a geographic area, which can vary in size from part of a city block to a large area of rural land. Each meshblock borders on another to form a network covering all of New Zealand, including coasts and inlets and extending out to the 200-mile economic zone.. Meshblocks are added together to build up larger geographic areas such as area units and urban areas. They are also used to define electoral districts, territorial authorities and regional councils.

Layer ID 95635
Data type Vector multipolygon
Feature count 35136
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 Higher Geographies 2018 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7702
105
Updated
26 Apr 2019

This dataset was last updated on Stats NZ Geographic Data Service on 26 Apr 2019.

This dataset is the definitive version of statistical area 2 (SA2) boundaries concorded to higher geographies as at 1 January 2018 as defined by Stats NZ, clipped to the coastline.
This version contains 2,171 SA2s and has been created for map creation/cartographic purposes and does not fully represent the official full extent boundaries. This statistical area 2 higher geographies file is a correspondence, or concordance, which relates SA2s to larger geographic areas or 'higher geographies'. The higher geographies contained in this concordance are: territorial authority (TA) and regional council (REGC).
Statistical area 2 (SA2) is a new output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. The SA2 geography aims to reflect communities that interact together socially and economically. In populated areas, SA2s generally contain similar sized populations.
Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

Layer ID 95066
Data type Vector multipolygon
Feature count 2171
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2018 (Centroid True)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

9376
117
Updated
17 May 2018

This dataset was last updated on Stats NZ Geographic Data Service on 17 May 2018.

Statistical Area 2 2018 (Centroid True) is the true centroid point layer for the major released version of the annually released statistical area 2 (SA2) boundaries for 2018. The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the location of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the SA2 polygon, depending on the shape of the polygon.The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection. Non-digitised meshblocks cannot have a centroid.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

Layer ID 93620
Data type Vector point
Feature count 2237
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2018 (Centroid Inside)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

9987
234
Updated
17 May 2018

This dataset was last updated on Stats NZ Geographic Data Service on 17 May 2018.

Statistical Area 2 2018 (Centroid Inside) is the inside centroid point layer for the major released version of the annually released statistical area 2 (SA2) boundaries for 2018.
The "inside" centroid is a point which always falls inside each SA2 polygon as this is often desirable in some users cases. The placement of the point is typically in the widest part of the polygon. The algorithms used are proprietary to ESRI and are related to label placement. Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the Meshblock geometry. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

Layer ID 93619
Data type Vector point
Feature count 2237
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 2018 (Centroid True)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7891
84
Added
11 Jan 2018

This dataset was first added to Stats NZ Geographic Data Service on 11 Jan 2018.

SA12018_V1_00_Centroid_True is the true centroid point layer for the major released version of the annually released statistical area 1 (SA1) boundaries as at 1 January 2018 as defined by Stats NZ. The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the location of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the SA1 polygon, depending on the shape of the polygon.The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection. Non-digitised meshblocks cannot have a centroid.

Layer ID 93614
Data type Vector point
Feature count 29873
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 2018 (Centroid Inside)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7721
60
Added
11 Jan 2018

This dataset was first added to Stats NZ Geographic Data Service on 11 Jan 2018.

SA12018_V1_00_Centroid_Inside is the inside centroid point layer for the major released version of the annually released statistical area 1 (SA1) boundaries as at 1 January 2018 as defined by Stats NZ.The "inside" centroid is a point which always falls inside each SA1 polygon as this is often desirable in some users cases. The placement of the point is typically in the widest part of the polygon. The algorithms used are proprietary to ESRI and are related to label placement. Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the Meshblock geometry. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 93613
Data type Vector point
Feature count 29873
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 2018 (Centroid True)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

9821
141
Added
11 Jan 2018

This dataset was first added to Stats NZ Geographic Data Service on 11 Jan 2018.

MB2018_V1_00_Centroid_True is the true centroid point layer for the major released version of the annually released meshblock boundaries for 2018. The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the locations of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the meshblock polygon, depending on the shape of the polygon. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection. Non-digitised meshblocks cannot have a centroid.

Layer ID 93612
Data type Vector point
Feature count 53573
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 2018 (Centroid Inside)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7360
90
Added
11 Jan 2018

This dataset was first added to Stats NZ Geographic Data Service on 11 Jan 2018.

MB2018_V1_00_Centroid_Inside is the inside centroid point layer for the major released version of the annually released meshblock boundaries as at 1 January 2018.The "inside" centroid is a point which always falls inside each meshblock polygon as this is often desirable in some users cases. The placement of the point is typically in the widest part of the polygon. The algorithms used are proprietary to ESRI and are related to label placement. Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the meshblock geometry. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 93611
Data type Vector point
Feature count 53573
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 71 to 80 of 141