Meshblock 2018 (Centroid True)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

16043
189
Added
11 Jan 2018

This dataset was first added to Stats NZ Geographic Data Service on 11 Jan 2018.

MB2018_V1_00_Centroid_True is the true centroid point layer for the major released version of the annually released meshblock boundaries for 2018. The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the locations of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the meshblock polygon, depending on the shape of the polygon. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection. Non-digitised meshblocks cannot have a centroid.

Layer ID 93612
Data type Vector point
Feature count 53573
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2018 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

14977
991
Updated
17 May 2018

This dataset was last updated on Stats NZ Geographic Data Service on 17 May 2018.

This dataset is the definitive set of statistical area 2 (SA2) boundaries at 1 January 2018, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. SA2 is a new output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. SA2s are defined at meshblock and SA1 levels.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Statistical Area 2 attachment below.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

Layer ID 92213
Data type Vector multipolygon
Feature count 2171
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Area Unit 2016 Generalised Version

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

15564
269
Added
07 Dec 2015

This dataset was first added to Stats NZ Geographic Data Service on 07 Dec 2015.

Area Unit 2016 Generalised Version is the definitive set of area unit boundaries for 2016 as defined by Statistics New Zealand.

Layer ID 8412
Data type Vector multipolygon
Feature count 2004
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 2021 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

15169
523
Updated
07 May 2021

This dataset was last updated on Stats NZ Geographic Data Service on 07 May 2021.

This dataset is the definitive set of annually released meshblock boundaries for 2021 as defined by Stats NZ. This version contains 53,598 meshblocks.

Stats NZ maintains an annual meshblock geography for collecting and producing statistical data. This allows data to be compared over time. A meshblock is the smallest geographic unit for which statistical data is collected and processed by Stats NZ. A meshblock is defined by a geographic area, which can vary in size from part of a city block to a large area of rural land. Each meshblock borders on another to form a network covering all of New Zealand, including coasts and inlets and extending out to the 200-mile economic zone. Meshblocks are added together to build up larger geographic areas such as statistical area 1 (SA1), statistical area 2 (SA2), and urban rural. They are also used to define electoral districts, territorial authorities, and regional councils.

The following 16 meshblocks are outside the 12 mile limit and are not held in digitised form: 0016901, 0016902, 1588000, 3166401, 3166402, 3166600, 3166710, 3166711, 3195000, 3196001, 3196002, 3196003, 3196004, 3196005, 3196006, 3196007.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

The meshblock classification can also be downloaded from the Stats NZ classification and concordance tool Ariā.

Layer ID 105176
Data type Vector multipolygon
Feature count 53598 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Territorial Authority 2018 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

14692
898
Added
03 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.

This dataset is the definitive set of annually released territorial authority boundaries at 1 January 2018, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. A territorial authority is defined under the Local Government Act 2002 as a city or a district council. Territorial authorities are the second tier of local government in New Zealand, below regional councils.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Territorial Authority attachment below.

Layer ID 92215
Data type Vector multipolygon
Feature count 68
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock boundaries 2013

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

15219
216
Added
20 Oct 2016

This dataset was first added to Stats NZ Geographic Data Service on 20 Oct 2016.

This is the release of the annually released meshblock pattern as at 1 January 2013. This dataset is the definitive set of meshblock boundaries for 2003 as defined by Statistics New Zealand.
Statistics New Zealand maintains an annual meshblock pattern for the collection and production of statistical data, allowing data to be compared over time. A meshblock is the smallest geographic unit for which statistical data is collected and processed by Statistics New Zealand. A meshblock is defined by a geographic area, which can vary in size from part of a city block to a large area of rural land. Each meshblock abuts against another to form a network covering all of New Zealand, including coasts and inlets and extending out to the 200 mile economic zone. Meshblocks are added together to build up larger geographic areas such as area units and urban areas. They are also used to define electoral districts, territorial authorities and regional councils.

Layer ID 25747
Data type Vector multipolygon
Feature count 46637 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2018 (Centroid True)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

14836
156
Updated
17 May 2018

This dataset was last updated on Stats NZ Geographic Data Service on 17 May 2018.

Statistical Area 2 2018 (Centroid True) is the true centroid point layer for the major released version of the annually released statistical area 2 (SA2) boundaries for 2018. The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the location of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the SA2 polygon, depending on the shape of the polygon.The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection. Non-digitised meshblocks cannot have a centroid.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

Layer ID 93620
Data type Vector point
Feature count 2237
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Territorial Authority 2016 Generalised Version

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

14534
161
Added
07 Dec 2015

This dataset was first added to Stats NZ Geographic Data Service on 07 Dec 2015.

Territorial Authority 2016 Generalised Version is the definitive set of territorial authority boundaries for 2016 as defined by the Local Government Commission and/or the territorial authorities themselves but maintained by Statistics New Zealand (the custodian). A territorial authority is defined under the Local Government Act 2002 as a city or a district council.

Layer ID 8409
Data type Vector multipolygon
Feature count 68
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Ward 2018 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

14364
337
Added
03 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.

This dataset is the definitive set of ward boundaries 1 January 2018 as defined by the territorial authorities and/or Local Government Commission, and maintained by Stats NZ.Wards are defined under the Local Electoral Act 2001 and result from dividing a territorial authority for electoral purposes. Wards are defined at meshblock level.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Ward attachment below.

Layer ID 92221
Data type Vector multipolygon
Feature count 245
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 2020 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

14169
456
Updated
02 Feb 2020

This dataset was last updated on Stats NZ Geographic Data Service on 02 Feb 2020.

This dataset is the definitive set of annually released meshblock boundaries for 2020 as defined by Stats NZ. This version contains 53,596 meshblocks.

Stats NZ maintains an annual meshblock geography for collecting and producing statistical data. This allows data to be compared over time. A meshblock is the smallest geographic unit for which statistical data is collected and processed by Stats NZ. A meshblock is defined by a geographic area, which can vary in size from part of a city block to a large area of rural land. Each meshblock borders on another to form a network covering all of New Zealand, including coasts and inlets and extending out to the 200-mile economic zone. Meshblocks are added together to build up larger geographic areas such as statistical area 1 (SA1), statistical area 2 (SA2), and urban rural. They are also used to define electoral districts, territorial authorities, and regional councils.

The following 16 meshblocks are outside the 12 mile limit and are not held in digitised form: 0016901, 0016902, 1588000, 3166401, 3166402, 3166600, 3166710, 3166711, 3195000, 3196001, 3196002, 3196003, 3196004, 3196005, 3196006, 3196007.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

The meshblock classification can also be downloaded from the Stats NZ classification and concordance tool Ariā.

Layer ID 104280
Data type Vector multipolygon
Feature count 53596 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 21 to 30 of 253