Regional Council 2001

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12037
41
Added
20 Oct 2016

This dataset was first added to Stats NZ Geographic Data Service on 20 Oct 2016.

This is the definitive set of regional council boundaries for 2001 as defined by the Local Government Commission and/or regional councils themselves but maintained by Statistics New Zealand (the custodian) as at 1 January 2001.
The regional council is the top tier of local government in New Zealand. There are 16 regional councils in New Zealand (defined by Part 1 of Schedule 2 of the Local Government Act 2002). Eleven are governed by an elected regional council, while five are governed by territorial authorities (the second tier of local government) who also perform the functions of a regional council and are known as unitary authorities. These unitary authorities are Nelson City Council, and Gisborne, Tasman, and Marlborough District Councils. The Chatham Islands Council also performs some of the functions of a regional council, but is not strictly a unitary authority. Unitary authorities act as regional councils for the purposes of a wide range of legislative purposes. Regional councils are responsible for the administration of many environmental and transport matters such as land transport planning and harbour navigation and safety.
Regional Councils were established in 1989 after the abolition of the 22 local government regions. The Local Government Act 2002 requires the boundaries of regions to conform, as far as possible, to one or more water catchments. When determining regional boundaries, the Local Government Commission gave consideration to regional communities of interest when selecting which water catchments to include in a region. It also considered factors such as natural resource management, land use planning and environmental matters. Some regional council boundaries are coterminous with territorial authority boundaries but there are several exceptions. An example is Taupo District, which is geographically split between four regions, although most of its area falls within the Waikato Region. Where territorial local authorities straddle regional council boundaries, the affected area is statistically defined by complete area units. In general, however, regional councils contain complete territorial authorities.
The seaward boundary of any coastal regional council is the twelve mile New Zealand territorial limit.

Layer ID 25740
Data type Vector multipolygon
Feature count 17
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 Higher Geographies 2018 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11895
171
Updated
22 May 2018

This dataset was last updated on Stats NZ Geographic Data Service on 22 May 2018.

This dataset is the definitive version of the annually released statistical area 1 (SA1) boundaries concorded to higher geographies at 1 January 2018. This statistical area 1 higher geographies 2018 file is a correspondence, or concordance, which relates SA1s to larger geographic areas or 'higher geographies'. The higher geographies contained in this concordance are: regional council (REGC2018), statistical area 2 (SA22018), territorial authority (TA2018), urban rural (UR2018), and urban rural indicator (IUR2018).The following geographies were introduced in 2018: statistical area 1 (SA12018), statistical area 2 (SA22018), urban rural (UR2018), and urban rural indicator (IUR2018). These new geographies are part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaces the 1992 New Zealand Standard Areas Classification (NZSAC92). The statistical standard for geographic areas is to be used from 2018 (SSGA18). It defines the Stats NZ input and output geographic classifications and describes their primary purposes, and sets out requirements and guidelines for the creation and maintenance of statistical geographies. Statistical area geographies are aggregations of meshblocks optimised to be of similar population sizes to enable the release of low-level data. They are non-administrative areas that are in between meshblocks and territorial authorities in size. Statistical areas either define or aggregate to define urban rural areas, territorial authorities, and regional councils.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

Layer ID 92206
Data type Vector multipolygon
Feature count 29889 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock Higher Geographies 2017 (high definition)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11766
57
Added
15 Feb 2017

This dataset was first added to Stats NZ Geographic Data Service on 15 Feb 2017.

This Meshblock Higher Geographies 2017 (high definition) file is a correspondence, or concordance, which relates meshblocks to larger geographic areas or 'higher geographies'. A high definition version is the highest geographic resolution geometry and is aligned to the LINZ cadastre.
The higher geographies contained in this concordance are: area unit (AU2017), community board (CB2017), constituency (CON2017), Māori constituency (MCON2017), regional council (REGC2017), subdivision (TASUB2017), territorial authority (TA2017), urban area (UA2017) and ward (WARD2017).

Digital boundary data became freely available on 1 July 2007.

For further information on individual higher geographies, refer to their metadata.

Layer ID 27782
Data type Vector multipolygon
Feature count 50613 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 2018 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11460
281
Added
03 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.

This dataset is the definitive set of annually released statistical area 1 (SA1) boundaries at 1 January 2018, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. SA1 is a new output geography that allows the release of more detailed information about population characteristics than is available at the meshblock level. SA1s are defined at meshblock level.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Statistical Area 1 attachment below.

Layer ID 92211
Data type Vector multipolygon
Feature count 29688
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Territorial Authority 2006

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11614
113
Added
20 Oct 2016

This dataset was first added to Stats NZ Geographic Data Service on 20 Oct 2016.

This dataset is a definitive set of territorial authority boundaries for 2006 as defined by the Local Government Commission and/or the territorial authorities themselves but maintained by Statistics New Zealand (the custodian). A territorial authority is defined under the Local Government Act 2002 as a city or a district council.

Layer ID 25736
Data type Vector multipolygon
Feature count 73
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Subdivision 2018 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11573
59
Added
03 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.

This dataset is the definitive set of the annually released territorial authority subdivision boundaries at 1 January 2018, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. Subdivisions are set up under the Local Government Act 2002 and Local Electoral Act 2001. A subdivision is a division of a community or local board area for electoral purposes. Subdivisions are defined at meshblock level and nest within community or local boards.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Subdivision attachment below.

Layer ID 92217
Data type Vector multipolygon
Feature count 139
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Territorial Authority 2021 (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

10811
614
Added
06 Dec 2020

This dataset was first added to Stats NZ Geographic Data Service on 06 Dec 2020.

This dataset is the definitive set of annually released territorial authority boundaries for 2021 as defined the territorial authorities and/or Local Government Commission and maintained by Stats NZ (the custodian). This version contains 68 categories.

A territorial authority is defined under the Local Government Act 2002 as a city or a district council. There are 67 territorial authorities in New Zealand. Some territorial authority boundaries are coterminous with regional council boundaries but there are several exceptions. An example is Taupo District, which is split between four regions, although most of its area falls within the Waikato Region. Territorial authorities are defined at meshblock, statistical area 1 (SA1) and statistical area 2 (SA2) levels.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105153
Data type Vector multipolygon
Feature count 68
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock Higher Geographies 2016 High Definition

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11363
53
Added
07 Dec 2015

This dataset was first added to Stats NZ Geographic Data Service on 07 Dec 2015.

Meshblock Higher Geographies 2016 High Definition is the definitive high definition set of the annually released meshblock pattern concorded to higher geographies as at 1 January 2016.

Layer ID 8414
Data type Vector multipolygon
Feature count 47062 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock Higher Geographies 2019 (high definition)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11291
98
Added
03 Dec 2018

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2018.

This dataset is a high definition (HD) version of the annually released meshblock boundaries concorded to higher geographies as at 1 January 2018 as defined by Stats NZ. This version contains 53,596 meshblocks, including 16 with empty or null geometries (non-digitised meshblocks).

This Meshblock Higher Geographies 2019 file is a correspondence, or concordance, which relates meshblocks to larger geographic areas or 'higher geographies'. This HD version is the most detailed geometry, suitable for use in GIS for geometric analysis operations and for the computation of areas, centroids and other metrics. The HD version is aligned to the LINZ cadastre.

The higher geographies contained in this concordance are: community board (CB2019), constituency (CON2019), Māori constituency (MCON2019), regional council (REGC2019), statistical area 1 (SA12019), statistical area 2 (SA22019), subdivision (TASUB2019), territorial authority (TA2019), urban rural (UR2019), urban rural indicator (IUR2019), and ward (WARD2019). The following geographies were first introduced in 2018: statistical area 1 (SA1), statistical area 2 (SA2), urban rural (UR), and urban rural indicator (IUR). These new geographies are part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaces the 1992 New Zealand Standard Areas Classification (NZSAC92). The statistical standard for geographic areas is to be used from 2018(SSGA18). It defines the Stats NZ input and output geographic classifications and describes their primary purposes, and sets out requirements and guidelines for the creation and maintenance of statistical geographies.

Digital boundary data became freely available on 1 July 2007.

For further information on individual higher geographies, refer to their metadata.

Layer ID 98768
Data type Vector multipolygon
Feature count 53596 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 2018 (Centroid Inside)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11273
114
Added
11 Jan 2018

This dataset was first added to Stats NZ Geographic Data Service on 11 Jan 2018.

MB2018_V1_00_Centroid_Inside is the inside centroid point layer for the major released version of the annually released meshblock boundaries as at 1 January 2018.The "inside" centroid is a point which always falls inside each meshblock polygon as this is often desirable in some users cases. The placement of the point is typically in the widest part of the polygon. The algorithms used are proprietary to ESRI and are related to label placement. Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the meshblock geometry. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 93611
Data type Vector point
Feature count 53573
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 61 to 70 of 253