Regional Tourism Organisation Areas 2020 Clipped

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

33890
50
Added
31 Aug 2020

This dataset was first added to Stats NZ Geographic Data Service on 31 Aug 2020.

Regional tourism organisation boundaries are meshblock based and were created by dissolving groupings of ward and territorial authority areas. This version of regional tourism organisation boundaries is clipped to the coastline and excludes those meshblocks that had a land/water attribute of Inlet or Oceanic. Regional tourism organisations are responsible for the promotion of their regions to prospective domestic and international visitors. This version has been developed with input from Regional Tourism New Zealand.

Note: Not all 37 categories representing regional tourism organisation areas are currently operating as regional tourism organisations at the time of publishing. Those areas not operating as regional tourism organisations are: Kawerau (06), Rangitikei (14), Tararua (16), Horowhenua (18) and Waimate (28).

Fiordland includes Fiordland National Park, Manapouri, Te Anau, and Te Anau Downs areas with the rest of the area assigned to Southland. Where a regional tourism organisation area boundary crossed a meshblock the meshblock was assigned to whichever regional tourism organisation area the majority of the meshblock fell within. The meshblocks crossed by regional tourism organisation areas boundaries are: 3174500 Fiordland 3175100 Fiordland 3173403 Southland 3172802 Southland 3172804 Southland 3172100 Fiordland 4004893 Fiordland 3191600 Fiordland 3191701 Fiordland 3192300 Southland 3192400 Southland 3193400 Fiordland.

The classification relating to this version can be viewed and downloaded from the Stats NZ classifications management system Ariā: Regional Tourism Organisation Areas V3.0.0.

Layer ID 104934
Data type Vector multipolygon
Feature count 37
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Regional Tourism Organisation Areas 2022 Clipped

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

27467
8
Added
04 Aug 2022

This dataset was first added to Stats NZ Geographic Data Service on 04 Aug 2022.

Regional tourism organisation boundaries are meshblock based and were created by dissolving groupings of ward and territorial authority areas. This version of regional tourism organisation boundaries is clipped to the coastline and excludes those meshblocks that had a land/water attribute of Inlet or Oceanic. Regional tourism organisations are responsible for the promotion of their regions to prospective domestic and international visitors. This version has been developed with input from Regional Tourism New Zealand.

RTO label represents the trading name of the organisation responsible for a region’s tourism marketing and/or economic development.

Note: Not all 37 categories representing regional tourism organisation areas are currently operating as regional tourism organisations at the time of publishing. Those areas not operating as regional tourism organisations are: Kawerau (06), Rangitīkei (14), Tararua (16), Horowhenua (18) and Waimate (28).

Fiordland includes Fiordland National Park, Manapouri, Te Anau, and Te Anau Downs areas with the rest of the area assigned to Southland. Where a regional tourism organisation area boundary crossed a meshblock the meshblock was assigned to whichever regional tourism organisation area the majority of the meshblock fell within.

The classification relating to this version can be viewed and downloaded from the Stats NZ classifications management system Ariā: Regional Tourism Organisation Areas V4.0.0.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

Layer ID 109936
Data type Vector multipolygon
Feature count 37
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2023 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

19862
18
Added
01 Dec 2022

This dataset was first added to Stats NZ Geographic Data Service on 01 Dec 2022.

Statistical Area 2 2023 update

SA2 2023 is the first major update of the geography since it was first created in 2018. The update is to ensure SA2s are relevant and meet criteria before each five-yearly population and dwelling census. SA2 2023 contains 135 new SA2s. Updates were made to reflect real world change ofpopulation and dwelling growthmainly in urban areas, and to make some improvements to their delineation of communities of interest.

Description

This dataset is the definitive version of the annually released statistical area 2 (SA2) boundaries as at 1 January 2023 as defined by Stats NZ (the custodian), clipped to the coastline. This clipped version has been created for cartographic purposes and so does not fully represent the official full extent boundaries. This clipped version contains 2,311 SA2 areas.

SA2 is an output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. The SA2 geography aims to reflect communities that interact together socially and economically. In populated areas, SA2s generally contain similar sized populations.

The SA2 should:

form a contiguous cluster of one or more SA1s,

excluding exceptions below, allow the release of multivariate statistics with minimal data suppression,

capture a similar type of area, such as a high-density urban area, farmland, wilderness area, and water area,

be socially homogeneous and capture a community of interest. It may have, for example:

· a shared road network,

· shared community facilities,

· shared historical or social links, or

· socio-economic similarity,

form a nested hierarchy with statistical output geographies and administrative boundaries. It must:

· be built from SA1s,

· either define or aggregate to define SA3s, urban areas, territorial authorities, and regional councils.

SA2s in city council areas generally have a population of 2,000–4,000 residents while SA2s in district council areas generally have a population of 1,000–3,000 residents.

In major urban areas, an SA2 or a group of SA2s often approximates a single suburb. In rural areas, rural settlements are included in their respective SA2 with the surrounding rural area.

SA2s in urban areas where there is significant business and industrial activity, for example ports, airports, industrial, commercial, and retail areas, often have fewer than 1,000 residents. These SA2s are useful for analysing business demographics, labour markets, and commuting patterns.

In rural areas, some SA2s have fewer than 1,000 residents because they are in conservation areas or contain sparse populations that cover a large area.

To minimise suppression of population data, small islands with zero or low populations close to the mainland, and marinas are generally included in their adjacent land-based SA2.

Zero or nominal population SA2s

To ensure that the SA2 geography covers all of New Zealand and aligns with New Zealand’s topography and local government boundaries, some SA2s have zero or nominal populations. These include:

· SA2s where territorial authority boundaries straddle regional council boundaries. These SA2s each have fewer than 200 residents and are: Arahiwi, Tiroa, Rangataiki, Kaimanawa, Taharua, Te More, Ngamatea, Whangamomona, and Mara.

· SA2s created for single islands or groups of islands that are some distance from the mainland or to separate large unpopulated islands from urban areas

· SA2s that represent inland water, inlets or oceanic areas including: inland lakes larger than 50 square kilometres, harbours larger than 40 square kilometres, major ports, other non-contiguous inlets and harbours defined by territorial authority, and contiguous oceanic areas defined by regional council.

· SA2s for non-digitised oceanic areas, offshore oil rigs, islands, and the Ross Dependency. Each SA2 is represented by a single meshblock. The following 16 SA2s are held in non-digitised form (SA2 code; SA2 name):

400001; New Zealand Economic Zone, 400002; Oceanic Kermadec Islands, 400003; Kermadec Islands, 400004; Oceanic Oil Rig Taranaki, 400005; Oceanic Campbell Island, 400006; Campbell Island, 400007; Oceanic Oil Rig Southland, 400008; Oceanic Auckland Islands, 400009; Auckland Islands, 400010 ; Oceanic Bounty Islands, 400011; Bounty Islands, 400012; Oceanic Snares Islands, 400013; Snares Islands, 400014; Oceanic Antipodes Islands, 400015; Antipodes Islands, 400016; Ross Dependency.

SA2 numbering and naming

Each SA2 is a single geographic entity with a name and a numeric code. The name refers to a geographic feature or a recognised place name or suburb. In some instances where place names are the same or very similar, the SA2s are differentiated by their territorial authority name, for example, Gladstone (Carterton District) and Gladstone (Invercargill City).

SA2 codes have six digits. North Island SA2 codes start with a 1 or 2, South Island SA2 codes start with a 3 and non-digitised SA2 codes start with a 4. They are numbered approximately north to south within their respective territorial authorities. To ensure the north–south code pattern is maintained, the SA2 codes were given 00 for the last two digits when the geography was created in 2018. When SA2 names or boundaries change only the last two digits of the code will change.

For more information please refer to the Statistical standard for geographic areas 2023.

Macrons

Names are provided with and without tohutō/macrons. The column name for those without macrons is suffixed ‘ascii’.

Digital data

Digital boundary data became freely available on 1 July 2007.

To download geographic classifications in table formats such as CSV please use Ariā

Layer ID 111206
Data type Vector multipolygon
Feature count 2311
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2018 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

15928
1108
Updated
17 May 2018

This dataset was last updated on Stats NZ Geographic Data Service on 17 May 2018.

This dataset is the definitive set of statistical area 2 (SA2) boundaries at 1 January 2018, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. SA2 is a new output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. SA2s are defined at meshblock and SA1 levels.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Statistical Area 2 attachment below.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

Layer ID 92213
Data type Vector multipolygon
Feature count 2171
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Urban Rural 2018 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

14773
217
Added
03 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.

This dataset is the definitive set of the annually released urban rural boundaries at 1 January 2018, clipped to the coastline.This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. Urban rural is a new output geography that classifies New Zealand into areas that share common urban or rural characteristics. Urban areas are built from the Statistical Area 2 geography, while rural and water areas are built from the Statistical Area 1 geography. Urban areas are statistically defined areas with no administrative or legal basis. The urban rural indicator is an attribute of this classification and provides additional information about a location's urban or rural nature.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Urban Rural or ANZLIC Metadata 2018 Urban Rural Indicator attachments below.

Layer ID 92219
Data type Vector multipolygon
Feature count 669
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Regional Council 2018 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

13259
491
Added
03 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.

This dataset is the major released version of the annually released regional council boundaries at 1 January 2018, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. Regional council is the top tier of local government in New Zealand. Regional councils are defined at meshblock, statistical area 1 (SA1), and statistical area 2 (SA2) levels.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Regional Council attachment below.

Layer ID 92205
Data type Vector multipolygon
Feature count 17
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 Higher Geographies 2018 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

13289
180
Updated
26 Apr 2019

This dataset was last updated on Stats NZ Geographic Data Service on 26 Apr 2019.

This dataset is the definitive version of statistical area 2 (SA2) boundaries concorded to higher geographies as at 1 January 2018 as defined by Stats NZ, clipped to the coastline.
This version contains 2,171 SA2s and has been created for map creation/cartographic purposes and does not fully represent the official full extent boundaries. This statistical area 2 higher geographies file is a correspondence, or concordance, which relates SA2s to larger geographic areas or 'higher geographies'. The higher geographies contained in this concordance are: territorial authority (TA) and regional council (REGC).
Statistical area 2 (SA2) is a new output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. The SA2 geography aims to reflect communities that interact together socially and economically. In populated areas, SA2s generally contain similar sized populations.
Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

Layer ID 95066
Data type Vector multipolygon
Feature count 2171
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 2018 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12760
304
Added
03 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.

This dataset is the definitive set of annually released statistical area 1 (SA1) boundaries at 1 January 2018, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. SA1 is a new output geography that allows the release of more detailed information about population characteristics than is available at the meshblock level. SA1s are defined at meshblock level.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Statistical Area 1 attachment below.

Layer ID 92211
Data type Vector multipolygon
Feature count 29688
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Ward 2018 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11844
155
Added
03 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.

This dataset is the major released version of the annually released ward boundaries at 1 January 2018, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and does not fully represent the official full extent boundaries. Wards are defined under the Local Electoral Act 2001 and result from dividing a territorial authority for electoral purposes. Wards are defined at meshblock level.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Ward attachment below.

Layer ID 92220
Data type Vector multipolygon
Feature count 245
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 Higher Geographies 2018 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11673
92
Updated
22 May 2018

This dataset was last updated on Stats NZ Geographic Data Service on 22 May 2018.

This dataset is the definitive version of the annually released statistical area 1 (SA1) boundaries concorded to higher geographies at 1 January 2018, clipped to the coastline. This statistical area 1 higher geographies 2018 file is a correspondence, or concordance, which relates SA1s to larger geographic areas or 'higher geographies'. The higher geographies contained in this concordance are: regional council (REGC2018), statistical area 2 (SA22018), territorial authority (TA2018), urban rural (UR2018), and urban rural indicator (IUR2018).The following geographies were introduced in 2018: statistical area 1 (SA12018), statistical area 2 (SA22018), urban rural (UR2018), and urban rural indicator (IUR2018). These new geographies are part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaces the 1992 New Zealand Standard Areas Classification (NZSAC92). The statistical standard for geographic areas is to be used from 2018 (SSGA18). It defines the Stats NZ input and output geographic classifications and describes their primary purposes, and sets out requirements and guidelines for the creation and maintenance of statistical geographies. Statistical area geographies are aggregations of meshblocks optimised to be of similar population sizes to enable the release of low-level data. They are non-administrative areas that are in between meshblocks and territorial authorities in size. Statistical areas either define or aggregate to define urban rural areas, territorial authorities, and regional councils.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

Layer ID 92207
Data type Vector multipolygon
Feature count 29688
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 37