Meshblock 2018 (Centroid True)

Stats NZ / GIS
0
0
Added
11 Jan 2018

This dataset was first added to Stats NZ Geographic Data Service on 11 Jan 2018.

MB2018_V1_00_Centroid_True is the true centroid point layer for the major released version of the annually released meshblock boundaries for 2018. The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the locations of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the meshblock polygon, depending on the shape of the polygon. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection. Non-digitised meshblocks cannot have a centroid.

Layer ID 93612
Data type Vector point
Feature count 53573
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 2018 (Centroid Inside)

Stats NZ / GIS
0
0
Added
11 Jan 2018

This dataset was first added to Stats NZ Geographic Data Service on 11 Jan 2018.

MB2018_V1_00_Centroid_Inside is the inside centroid point layer for the major released version of the annually released meshblock boundaries as at 1 January 2018.The "inside" centroid is a point which always falls inside each meshblock polygon as this is often desirable in some users cases. The placement of the point is typically in the widest part of the polygon. The algorithms used are proprietary to ESRI and are related to label placement. Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the meshblock geometry. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 93611
Data type Vector point
Feature count 53573
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock Higher Geographies 2018 (generalised)

Stats NZ / GIS
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

13
0
Added
01 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 01 Dec 2017.

This dataset is a major released version of the annually released meshblock boundaries concorded to higher geographies at 1 January 2018 as defined by Stats NZ. This Meshblock Higher Geographies 2018 file is a correspondence, or concordance, which relates meshblocks to larger geographic areas or 'higher geographies'. The higher geographies contained in this concordance are: community board (CB2018), constituency (CON2018), Māori constituency (MCON2018), regional council (REGC2018), statistical area 1 (SA12018), statistical area 2 (SA22018), subdivision (TASUB2018), territorial authority (TA2018), urban rural (UR2018), urban rural indicator (IUR2018), and ward (WARD2018). The following geographies were first introduced in 2018: statistical area 1 (SA12018), statistical area 2 (SA22018), urban rural (UR2018), and urban rural indicator (IUR2018). These new geographies are part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaces the 1992 New Zealand Standard Areas Classification (NZSAC92). The statistical standard for geographic areas is to be used from 2018 (SSGA18). It defines the Stats NZ input and output geographic classifications and describes their primary purposes, and sets out requirements and guidelines for the creation and maintenance of statistical geographies.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information on individual higher geographies, refer to their metadata.

Layer ID 92200
Data type Vector multipolygon
Feature count 53589 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 2018 (high definition)

Stats NZ / GIS
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

20
1
Added
01 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 01 Dec 2017.

This dataset is a high definition (HD) version of the annually released meshblock boundaries at 1 January 2018. This HD version is the most detailed geometry, suitable for use in GIS for geometric analysis operations and for the computation of areas, centroids and other metrics. The HD version is aligned to the LINZ cadastre. Stats NZ maintains an annual meshblock geography for collecting and producing statistical data. This allows data to be compared over time. A meshblock is the smallest geographic unit for which statistical data is collected and processed by Stats NZ. A meshblock is defined by a geographic area, which can vary in size from part of a city block to a large area of rural land. Each meshblock borders on another to form a network covering all of New Zealand, including coasts and inlets and extending out to the 200-mile economic zone. Meshblocks are added together to build up larger geographic areas such as statistical area 1 (SA1), statistical area 2 (SA2), and urban rural. They are also used to define electoral districts, territorial authorities, and regional councils. The digital geographic boundaries are defined and maintained by Stats NZ. Meshblocks cover the land area of New Zealand, the water area to the 12-mile limit, the Chatham Islands, Kermadec Islands, sub-Antarctic islands, off-shore oil rigs, and Ross Dependency.

Digital boundary data became freely available on 1 July 2007.

There are 16 meshblocks not held in digitised form.

For further information see ANZLIC Metadata 2018 Meshblock attachment below.

Layer ID 92199
Data type Vector multipolygon
Feature count 53589 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 2018 Clipped (generalised)

Stats NZ / GIS
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

0
0
Added
01 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 01 Dec 2017.

This dataset is the definitive set of annually released meshblock boundaries at 1 January 2018, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. Stats NZ maintains an annual meshblock geography for collecting and producing statistical data. This allows data to be compared over time. A meshblock is the smallest geographic unit for which statistical data is collected and processed by Stats NZ. A meshblock is defined by a geographic area, which can vary in size from part of a city block to a large area of rural land. Each meshblock borders on another to form a network covering all of New Zealand, including coasts and inlets and extending out to the 200-mile economic zone. Meshblocks are added together to build up larger geographic areas such as statistical area 1 (SA1), statistical area 2 (SA2), and urban rural. They are also used to define electoral districts, territorial authorities, and regional councils. The digital geographic boundaries are defined and maintained by Stats NZ. Meshblocks cover the land area of New Zealand, the water area to the 12-mile limit, the Chatham Islands, Kermadec Islands, sub-Antarctic islands, off-shore oil rigs, and Ross Dependency.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

There are 16 meshblocks not held in digitised form.

For further information see ANZLIC Metadata 2018 Meshblock attachment below.

Layer ID 92198
Data type Vector multipolygon
Feature count 52923
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 2018 (generalised)

Stats NZ / GIS
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

26
0
Added
01 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 01 Dec 2017.

This dataset is the definitive set of annually released meshblock boundaries at 1 January 2018. Stats NZ maintains an annual meshblock geography for collecting and producing statistical data. This allows data to be compared over time. A meshblock is the smallest geographic unit for which statistical data is collected and processed by Stats NZ. A meshblock is defined by a geographic area, which can vary in size from part of a city block to a large area of rural land. Each meshblock borders on another to form a network covering all of New Zealand, including coasts and inlets and extending out to the 200-mile economic zone. Meshblocks are added together to build up larger geographic areas such as statistical area 1 (SA1), statistical area 2 (SA2), and urban rural. They are also used to define electoral districts, territorial authorities, and regional councils. The digital geographic boundaries are defined and maintained by Stats NZ. Meshblocks cover the land area of New Zealand, the water area to the 12-mile limit, the Chatham Islands, Kermadec Islands, sub-Antarctic islands, off-shore oil rigs, and Ross Dependency.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

There are 16 meshblocks not held in digitised form.

For further information see ANZLIC Metadata 2018 Meshblock attachment below.

Layer ID 92197
Data type Vector multipolygon
Feature count 53589 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock Higher Geographies 2017 (high definition)

Stats NZ / GIS
Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

689
23
Added
15 Feb 2017

This dataset was first added to Stats NZ Geographic Data Service on 15 Feb 2017.

This Meshblock Higher Geographies 2017 (high definition) file is a correspondence, or concordance, which relates meshblocks to larger geographic areas or 'higher geographies'. A high definition version is the highest geographic resolution geometry and is aligned to the LINZ cadastre.
The higher geographies contained in this concordance are: area unit (AU2017), community board (CB2017), constituency (CON2017), Māori constituency (MCON2017), regional council (REGC2017), subdivision (TASUB2017), territorial authority (TA2017), urban area (UA2017) and ward (WARD2017).

Layer ID 27782
Data type Vector multipolygon
Feature count 50613 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Meshblock 2017 (generalised version)

Stats NZ / GIS
Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

518
36
Added
08 Feb 2017

This dataset was first added to Stats NZ Geographic Data Service on 08 Feb 2017.

This dataset is the definitive set of meshblock boundaries for 2017 as defined by Statistics New Zealand.

Statistics New Zealand maintains an annual meshblock pattern for collecting and producing statistical data. This allows data to be compared over time. A meshblock is the smallest geographic unit for which statistical data is collected and processed by Statistics New Zealand. A meshblock is defined by a geographic area, which can vary in size from part of a city block to a large area of rural land. Each meshblock borders on another to form a network covering all of New Zealand, including coasts and inlets and extending out to the 200-mile economic zone. Meshblocks are added together to build up larger geographic areas such as area units and urban areas. They are also used to define electoral districts, territorial authorities, and regional councils.

Layer ID 27774
Data type Vector multipolygon
Feature count 50613 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Ethnic group by meshblock (2013 Census)

Stats NZ / GIS
Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2557
75
Added
11 Dec 2015

This dataset was first added to Stats NZ Geographic Data Service on 11 Dec 2015.

2013 Census meshblock dataset contains counts at meshblock levels for selected variables from the 2013 Census. The geographies correspond to 2013 Census boundaries. The counts are at the highest level of each variable’s classification.

Notes:
Confidentiality rules have been applied to all cells in this table, including randomly rounding to base 3.
-999 indicates cells have been suppressed for confidentiality reasons.
-995 indicates cells that could not be calculated.

Layer ID 8448
Data type Vector multipolygon
Feature count 46621
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Age by meshblock (2013 Census)

Stats NZ / GIS
Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3792
136
Added
11 Dec 2015

This dataset was first added to Stats NZ Geographic Data Service on 11 Dec 2015.

2013 Census meshblock dataset contains counts at meshblock levels for selected variables from the 2013 Census. The geographies correspond to 2013 Census boundaries. The counts are at the highest level of each variable’s classification.

Notes:
Confidentiality rules have been applied to all cells in this table, including randomly rounding to base 3.
-999 indicates cells have been suppressed for confidentiality reasons.
-995 indicates cells that could not be calculated.

Layer ID 8447
Data type Vector multipolygon
Feature count 46621
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 22