Statistical Area 2 2018 (Centroid True)

Stats NZ / GIS
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3280
59
Updated
17 May 2018

This dataset was last updated on Stats NZ Geographic Data Service on 17 May 2018.

Statistical Area 2 2018 (Centroid True) is the true centroid point layer for the major released version of the annually released statistical area 2 (SA2) boundaries for 2018. The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the location of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the SA2 polygon, depending on the shape of the polygon.The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection. Non-digitised meshblocks cannot have a centroid.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

Layer ID 93620
Data type Vector point
Feature count 2237
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2018 (Centroid Inside)

Stats NZ / GIS
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2936
44
Updated
17 May 2018

This dataset was last updated on Stats NZ Geographic Data Service on 17 May 2018.

Statistical Area 2 2018 (Centroid Inside) is the inside centroid point layer for the major released version of the annually released statistical area 2 (SA2) boundaries for 2018.
The "inside" centroid is a point which always falls inside each SA2 polygon as this is often desirable in some users cases. The placement of the point is typically in the widest part of the polygon. The algorithms used are proprietary to ESRI and are related to label placement. Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the Meshblock geometry. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

Layer ID 93619
Data type Vector point
Feature count 2237
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

2013 Census counts by Statistical Area 2 2018

Stats NZ / GIS
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3363
112
Updated
22 May 2018

This dataset was last updated on Stats NZ Geographic Data Service on 22 May 2018.

The 2013 Census usually resident population count, household, and occupied dwellings (private and non-private) data has been rebased to the 2018 meshblock geography and is shown according to the new statistical geographies and urban rural classification developed as a result of the Statistical Standard for Geographic Areas 2018 (SSGA18) review. The data is experimental and is provided as a guide to understanding the impact of the new geographic boundaries on the previous census counts.
Note: This data has been randomly rounded to protect confidentiality. Individual figures may not add up to totals, and values for the same data may vary in different tables.
For further information see the attachments below: Information about data; 2013 Census counts on SA22018 lookup; and ANZLIC Metadata 2018 Statistical Area 2.
For 2013 Census usually resident population counts by statistical area 2 2018 and area unit 2013 see attachment: Census 2013 population counts by SA22018 and AU2013.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

Layer ID 92226
Data type Vector multipolygon
Feature count 2253 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2018 (generalised)

Stats NZ / GIS
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3510
158
Updated
17 May 2018

This dataset was last updated on Stats NZ Geographic Data Service on 17 May 2018.

This dataset is the definitive set of statistical area 2 (SA2) boundaries at 1 January 2018 as defined by Stats NZ. SA2 is a new output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. SA2s are defined at SA1 and meshblock levels.
Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.
For further information see ANZLIC Metadata 2018 Statistical Area 2 attachment below.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

Layer ID 92212
Data type Vector multipolygon
Feature count 2253 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 2018 (Centroid True)

Stats NZ / GIS
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2863
40
Added
11 Jan 2018

This dataset was first added to Stats NZ Geographic Data Service on 11 Jan 2018.

SA12018_V1_00_Centroid_True is the true centroid point layer for the major released version of the annually released statistical area 1 (SA1) boundaries as at 1 January 2018 as defined by Stats NZ. The "true" centroid is the centre of mass of that polygon, such that if some flat substance of uniform thickness and density were cut into the shape of that polygon, then that object would balance at the centroid. The centroid is a useful way of summarizing the location of a set of polygons as points, particularly when used for comparative analysis. Note that the centroid could potentially fall outside the SA1 polygon, depending on the shape of the polygon.The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection. Non-digitised meshblocks cannot have a centroid.

Layer ID 93614
Data type Vector point
Feature count 29873
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 2018 (generalised)

Stats NZ / GIS
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2973
104
Added
03 Dec 2017

This dataset was first added to Stats NZ Geographic Data Service on 03 Dec 2017.

This dataset is the definitive set of statistical area 1 (SA1) boundaries at 1 January 2018 as defined by Stats NZ. SA1 is a new output geography that allows for the release of more detailed information about population characteristics than is available at the meshblock level. SA1s are defined at meshblock level.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Statistical Area 1 attachment below.

Layer ID 92210
Data type Vector multipolygon
Feature count 29889 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2018 Clipped (generalised)

Stats NZ / GIS
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2420
125
Updated
17 May 2018

This dataset was last updated on Stats NZ Geographic Data Service on 17 May 2018.

This dataset is the definitive set of statistical area 2 (SA2) boundaries at 1 January 2018, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and may not fully represent the official full extent boundaries. SA2 is a new output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. SA2s are defined at meshblock and SA1 levels.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

For further information see ANZLIC Metadata 2018 Statistical Area 2 attachment below.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

Layer ID 92213
Data type Vector multipolygon
Feature count 2171
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 2018 (Centroid Inside)

Stats NZ / GIS
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2328
20
Added
11 Jan 2018

This dataset was first added to Stats NZ Geographic Data Service on 11 Jan 2018.

SA12018_V1_00_Centroid_Inside is the inside centroid point layer for the major released version of the annually released statistical area 1 (SA1) boundaries as at 1 January 2018 as defined by Stats NZ.The "inside" centroid is a point which always falls inside each SA1 polygon as this is often desirable in some users cases. The placement of the point is typically in the widest part of the polygon. The algorithms used are proprietary to ESRI and are related to label placement. Note that the "inside" centroid is NOT always the same as the center of gravity ("true" centroid) of the polygon as in some situations the true centroid may fall outside the Meshblock geometry. The dataset contains the EASTING and NORTHING attributes of the centroid point in NZGD2000 New Zealand Transverse Mercator (EPSG:2193) and LATITUDE and LONGITUDE of the centroid point in decimal degrees in WGS1984 (EPSG:4326) projection.

Layer ID 93613
Data type Vector point
Feature count 29873
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 Higher Geographies 2018 (generalised)

Stats NZ / GIS
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2346
51
Updated
22 May 2018

This dataset was last updated on Stats NZ Geographic Data Service on 22 May 2018.

This dataset is the definitive version of the annually released statistical area 1 (SA1) boundaries concorded to higher geographies at 1 January 2018. This statistical area 1 higher geographies 2018 file is a correspondence, or concordance, which relates SA1s to larger geographic areas or 'higher geographies'. The higher geographies contained in this concordance are: regional council (REGC2018), statistical area 2 (SA22018), territorial authority (TA2018), urban rural (UR2018), and urban rural indicator (IUR2018).The following geographies were introduced in 2018: statistical area 1 (SA12018), statistical area 2 (SA22018), urban rural (UR2018), and urban rural indicator (IUR2018). These new geographies are part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaces the 1992 New Zealand Standard Areas Classification (NZSAC92). The statistical standard for geographic areas is to be used from 2018 (SSGA18). It defines the Stats NZ input and output geographic classifications and describes their primary purposes, and sets out requirements and guidelines for the creation and maintenance of statistical geographies. Statistical area geographies are aggregations of meshblocks optimised to be of similar population sizes to enable the release of low-level data. They are non-administrative areas that are in between meshblocks and territorial authorities in size. Statistical areas either define or aggregate to define urban rural areas, territorial authorities, and regional councils.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

Layer ID 92206
Data type Vector multipolygon
Feature count 29889 (incl. 16 with empty or null geometries)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 1 Higher Geographies 2018 Clipped (generalised)

Stats NZ / GIS
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2221
35
Updated
22 May 2018

This dataset was last updated on Stats NZ Geographic Data Service on 22 May 2018.

This dataset is the definitive version of the annually released statistical area 1 (SA1) boundaries concorded to higher geographies at 1 January 2018, clipped to the coastline. This statistical area 1 higher geographies 2018 file is a correspondence, or concordance, which relates SA1s to larger geographic areas or 'higher geographies'. The higher geographies contained in this concordance are: regional council (REGC2018), statistical area 2 (SA22018), territorial authority (TA2018), urban rural (UR2018), and urban rural indicator (IUR2018).The following geographies were introduced in 2018: statistical area 1 (SA12018), statistical area 2 (SA22018), urban rural (UR2018), and urban rural indicator (IUR2018). These new geographies are part of the Statistical Standard for Geographic Areas 2018 (SSGA18) which replaces the 1992 New Zealand Standard Areas Classification (NZSAC92). The statistical standard for geographic areas is to be used from 2018 (SSGA18). It defines the Stats NZ input and output geographic classifications and describes their primary purposes, and sets out requirements and guidelines for the creation and maintenance of statistical geographies. Statistical area geographies are aggregations of meshblocks optimised to be of similar population sizes to enable the release of low-level data. They are non-administrative areas that are in between meshblocks and territorial authorities in size. Statistical areas either define or aggregate to define urban rural areas, territorial authorities, and regional councils.

Digital boundary data became freely available on 1 July 2007. This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Please note that a review of SA2 names was undertaken in early 2018. The review addressed issues with inconsistent naming and applied corrections, resulting in an update to this dataset applied in May 2018. All SA2 codes are unchanged.

Layer ID 92207
Data type Vector multipolygon
Feature count 29688
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 23